Table of Contents
Advertisement
Quick Links
Advertisement
Table of Contents
Summary of Contents for PREPLINE IB270TF
- Page 1 INSTRUCTION MANUAL Original instructions for IMMERSION BLENDER (HAND MIXER) IB270TF / IB270TV / IB350CF / IB350CV / IB500LF / IB500LV / IB750LF / IB750LV Keep these instructions with the appliance. You should read this user manual carefully before using the appliance.
-
Page 2: Intended Use
The assortment is made up of 4 different sizes: IB270TF/IB270TV/IB350CF/IB350CV/IB500LF/IB500LV/IB750LF/IB750LV. The machine body is built in PA66+GF30% and stainless steel for easy cleaning and maintenance. It has safety features compliant with the applicable safety Directives. - Page 3 on the cord. 2.1.12 Ensure that the cord (or extension cord) is positioned so that it will not cause a trip hazard. 2.1.13 Always keep an eye on the appliance when in use. 2.1.14 As long as the plug is in the socket the appliance is connected to the power source.
-
Page 4: Product Description
2.2.11 WARNING: ALWAYS keep hands, long hair and clothing away from the moving parts. 2.2.12 WARNING: Take great care when handling the cutting blade. Wear protective gloves (not supplied) if necessary. 2.2.13 Allow at least 15cm spacing around the appliance for ventilation purpose during use. 2.2.14 Do not wash the appliance with water or waterjet. - Page 5 3.2 MAIN TECHNICAL PARAMETERS Noise Voltage Model Power Speed Level Supply Weight Length, Diameter, IB270TF 270W 20000RPM 1.4 kgs 316 mm Ø79mm 80~85dB IB270TV 270W 4000~20000RPM 1.4 kgs 316 mm Ø79mm 80~85dB IB350CF 350W 16000RPM 2.1 KGS 373 mm Ø 96 mm...
- Page 6 Model Net Weight Remark Length Diameter WIK185 0.81KGS USE FOR IB270TV ONLY BLD160 0.53KGS USE FOR IB270TF / IB270TV Ø 28 USE FOR IB350CV / IB500LV / WIK250 0.86KGS IB750LV BLD200 0.69KGS Ø 35 mm BLD250-N 0.93KGS Ø 35 mm...
-
Page 7: Installation
4.1.9 Warning! When the whisk is used, make sure to start appliance with low speed. 4.1.10 Warning! It is forbidden the use of the whisk in the machines with fixed speed. 4.1.11 Disconnect the machine’s socket from the electric before carrying out any cleaning or maintenance operations. -
Page 8: Continuous Operation
4.4.2.3 Insert the tube or whisk into the appliance. 4.4.2.4 Press and hold down the safety button (No.1) if the appliance has. 4.4.2.5 Press the on-off button (No.3), and the blender will start up. Now, release safety button (No.1). 4.4.2.6 To stop the blender, release the on-off button (No.3), then blender stop. -
Page 9: Assembling / Dismantling
The assembly / disassembly operations of every device of the appliance are performed with the appliance stop and with the plug disconnected from the socket. 4.5.1 Assembly Model IB270TF and IB270TV: 1. Align and insert the coupling (5) of the tube (3) or whisk (4) in the clutch (2) of the machine body (1). - Page 10 Warning 1: The blender tubes and whisks are not suitable for the dishwasher! Warning 2: Blender tubes and whisk cannot be immersed thoroughly in water! 4.7 Storage 4.7.1 Before reassembling, make sure that all parts are dry. Before storing, remove all residues from the appliance and attachments, disconnect it from the supply and clean the appliance and its accessories thoroughly.
-
Page 11: Circuit Diagram
5 Circuit diagram IB270TF IB270TV IB350CF / IB500LF / IB750LF IB350CV / IB500LV / IB750LV... -
Page 12: Exploded View And Spare Parts Lists
Exploded view and spare parts lists IB270TF/IB270TV Part Name One set of screw plungers Power cord Left and right housing PCB speed control board Cable sheath Speed control key/cover Pressing board Switch Switch Sheath Switch osculant staff Motor Spline sleeve... - Page 13 IB350CF / IB350CV / IB500LF / IB500LV Name Name Rubber ring Rubber push sheath Motor Push bolt Spring Air deflector Switch Interlocking push bolt Pressing board Interlocking push bolt Spring Cable sheath Housing Power cord with tail Speed control board Rubber interlocking protector Switch osculant staff Screw plunger...
- Page 14 IB750LF / IB750LV...
- Page 15 BLD200 Name Name Name Spline Output axis Graphite ring Spline seal ring 304 S/S tube Graphite ring spring Connect sleeve seal ring Bearing sleeve Convex ring Connect sleeve Knife protector Smooth blade Fastening sleeve Ceramic ring sleeve Oil Sealing 608 Bearing Ceramic ring BLD200-N / BLD250-N / BLD300-N / BLD320-N / BLD400-N / BLD450-N / BLD500-N / BLD550-N Name...
- Page 16 WIK185 WIK250 Part Name Part Name Part Name Silicone rubber ring Needle bearing Lower cover Spline Screw Oil sealing Φ8 Snap ring Screw set screw Bearing washer Baffle plate Cylindrical pin Φ16 Snap ring Bearing Fixed board Connect sleeve Gear B Steel ring Gear shaft Cylindrical pin...
Need help?
Do you have a question about the IB270TF and is the answer not in the manual?
Questions and answers