Page 1
SMART . EASY . SIMPLE INSTANT HOT WATER DISPENSER CHANGE YOUR FILTER IN 3 EASY STEPS PRODUCT FEATURES ZERO INSTANT REAL-TIME 5-STAGE HYDROPURE™ DIY FILTER FILTER FILTER INSTALLATION HOT WATER ROOM WATER ULTRA-FILTRATION REPLACEMENT LIFESPAN LIFESPAN TEMP. DISPLAY SYSTEM INDICATOR INDICATOR FIVE TEMPERATURE FIVE PRESET...
Experience convenience beyond expectation with novita Instant Hot Water Dispenser W11 anytime, anywhere! Introducing the all new installation-free novita Instant Hot Water Dispenser W11, ideal for any contemporary living space with its slimline, portable and compact design. Featuring a proprietary thermoelectric technology, it instantly heats up and dispenses piping hot water up to 90°C within just 1 second! Together with its convenient 5 flexible...
DISPENSER HYDROPURE ULTRA-FILTRATION SYSTEM novita Instant Hot Water Dispenser is meant for use in municipally treated water but NOT water that is microbiologically unsafe & unknown. Individuals requiring water of a certain microbiological standard should consult the advice of their doctors or practioners in regard to the usage of novita Instant Hot Water Dispenser.
INSTANT HOT WATER DISPENSER CONTROL PANEL & LED DISPLAY DESCRIPTION REFILL CLEAN TANK PLEASE PURIFY WAIT... Select Water Volume Button Hot Water Protection Lock • Press this button to select the preset dispensing volume at 5 • Indicates hot water protection lock is activated when it intervals, 90 ml, 150 ml, 250 ml, 330 ml or continuous illuminates in red and water temperature of 60 C and...
• It is strongly recommended to replace the filter accordingly to its recommended usage for hygiene purposes & optimum performance. • novita Instant Hot Water Dispenser W11 is meant for use in municipally treated water but NOT water that is microbiologically unsafe and unknown.
INSTANT HOT WATER DISPENSER SETTING UP STEP 01 Place the unit on a stable and level surface with proximity to a power supply to prepare the unit set up. • There should be 20 cm clearance between the wall and by the sides of the unit for proper ventilation. •...
Page 8
STEP 05 Place the filled source water tank back into its designated compartment and exert some pressure to press it down to make sure it is connected in position. Reattach the source water tank cover back onto the unit. STEP 06 Align and assemble the magnetic drip tray onto the unit as illustrated.
INSTANT HOT WATER DISPENSER PREPARING THE UNIT FOR TRANSPORTATION STEP 01 Turn off the power supply and disconnect the power plug. STEP 02 Lift up the source water tank cover. Remove the source water tank and empty the content. STEP 03 Direct the water drainage outlet towards a sink or prepare a container prior to removing the drainage outlet stopper.
USING THE INSTANT HOT WATER DISPENSER • During Standby Mode, all LED light indicator stops illuminating, only the Water Dispensing Button illuminates at 30% of its original light intensity for energy conservation. • In the event if the unit is not used for 3 day or longer, please switch OFF the unit, empty the source water tank. Direct the water drainage outlet towards a sink or prepare a container prior to removing the drainage outlet stopper and attach the water discharge hose to drain out the remaining water in the internal purified water tank.
Page 11
INSTANT HOT WATER DISPENSER 6. STANDBY MODE When unit is left idle for continuous 3 minutes, it will automatically enter standby mode with all LED light indicators stop illuminating only button illuminates at 30% of its original light intensity for energy conservation. Press any button on the control panel to wake up the unit from standby mode.
3,000 LITRES*/12 MONTHS FILTER REPLACEMENT For optimum performance, it is recommended to replace the filter once every 3,000 litres* of water/12 months from initial usage, whichever comes first. The filter is designed and produced for approximate 3,000 litres* of municipally treated water purification. Prolonged usage of exhausted filters would compromise water quality and flow rate, affecting performance and usage experience.
Page 13
INSTANT HOT WATER DISPENSER Front New Filter Facing Filter Holder STEP 06 Remove the plastic packaging on the new 5-Stage HydroPure Ultra-Filtration System, align and assemble it into the unit, ensure it is fitted snugly. • Check to ensure the filter is properly assembled and installed into the filter base connector correctly before usage.
CLEANING & MAINTENANCE For external maintenance, regularly use a damp cloth to wipe the surface to prevent accumulation of dust. It is recommended to regularly maintain and clean the source water tank and magnetic drip tray. As a good practice, empty the source water tank and clean it at least once a week.
Page 15
INSTANT HOT WATER DISPENSER 2. MAGNETIC DRIP TRAY Empty the drip tray periodically to prevent overflow. Clean it once a week to prevent possible build-up of bacteria. STEP 01 Detach and remove the drip tray from the unit. Proceed to remove the cup holder grille and empty the content in the drip tray.
WAIT... PURIFY PLEASE WAIT... Servicing should only be conducted Always use room temperature or tap DO NOT use mirco-biologically by professional service technicians water for filtration. unsafe water. from novita. CLEAN REFILL TANK PLEASE PURIFY WAIT... 45º 20cm 20cm DO NOT tilt the unit more than...
Page 17
INSTANT HOT WATER DISPENSER CLEAN REFILL TANK PURIFY PLEASE WAIT... CLEAN REFILL TANK PLEASE PURIFY WAIT... CLEAN REFILL TANK PURIFY PLEASE WAIT... Stable & Level Surface Keep the unit away from direct DO NOT place any heavy objects on Always place the unit on a stable and sunlight or any heat source.
Always remember to MAINTAIN and REPLACE the filter according to its stipulated maintenance or exhaustion date. Ensure that the filter and all parts of novita Instant Hot Water Dispenser W11 are not cracked or damaged at all times. When damaged, the water purification process is compromised and the water might hence be unfit for consumption.
• Ensure that power plug is connected snugly. switched on. connection is loose. • Power plug or cord is damaged. • Turn OFF power and contact novita Customer Care Centre. • Power cut-off. • Check power source & contact a qualified electrician if power cutoff is caused by adnormal electrical pressure or overloaded circuit.
• Contact novita Customer Care Centre. purified water tank. Water leakage from • Malfunction of internal parts • Turn OFF power and contact novita the unit. Customer Care Centre. • Magnetic drip tray is full. • Empty the magnetic drip tray, dry it thoroughly before placing it back onto the unit.
MINIMUM DOWNTIME Understanding that time is of the essence, for each servicing or repair, novita guarantees that we will only take up to 7 working days to get your product up and ready for collection.
This limited warranty is void if the serial number on the Product had been removed, erased, defaced, altered, tampered or is illegible. novita will repair or replace this product at their option and at no charge with new or reconditioned parts or Product if found to be defective during the limited warranty period specified above.
INSTANT HOT WATER DISPENSER In the event that the Product is out of stock, obsolete or beyond repair, novita reserves all rights to replace the Product with another similar value as deem appropriate, subject to availability. novita reserves all rights to impose charges for services on the Product which are outside the perimeter of limited warranty coverage.
Need help?
Do you have a question about the HydroPure W11 and is the answer not in the manual?
Questions and answers