Advertisement
Advertisement
Table of Contents
Related Manuals for PurePower PPAC053
Summary of Contents for PurePower PPAC053
- Page 1 AIR COMPRESSOR PPAC053 OPERATOR’s MANUAL...
-
Page 2: Specifications
TABLE OF CONTENTS SPECIFICATIONS INTRODUCTION SAFETY OVERVIEW INSTALLATION AND GROUNDING COMPONENT DIAGRAM SPECIFICATIONS OPERATION MAINTENANCE TROUBLESHOOTING WARRANTY SPECIFICATIONS ITEM RATING Running Horsepower 0.5 HP Voltage Running Amps Cord Length 6’ Maximum Air Pressure 135 PSI CFM @ 40 PSI CFM @ 90 PSI Lubrication Oil Free Tank Size... - Page 3 INTRODUCTION Congratulations on your purchase of a Pure Power Equipment air compressor You can be confident that this machine is constructed and tested with optimum performance and quality in mind. Reading this manual will help get you the best results for set-up, operation, maintenance and avoid personal injury or damage to your machine.
-
Page 4: Safety Overview
SAFETY OVERVIEW SAVE THESE INSTRUCTIONS - SAFETY RULES This is the safety alert symbol. It is used to alert you to potential personal injury hazards. Obey all safety messages that follow this symbol to avoid possible injury or death. The safety alert symbol ( ) is used with a signal word (DANGER, CAUTION, WARNING), a pictorial and a safety message to alert you to hazards. - Page 5 SAFETY OVERVIEW WARNING - PERSONAL SAFETY • ALWAYS wear correct personal protection equipment as needed for the task at hand and with the air tools and accessories being used. • ALWAYS wear safety goggles for eye protection. Other protective equipment such as hearing protection, steel toe boots, safety apparel, work gloves and face shield are all recommended.
- Page 6 SAFETY OVERVIEW WARNING – AIR TOOLS AND ACCESSORIES • NEVER exceed the pressure rating on any air tools, spray guns, accessories or inflatables. Excessive pressure can cause failure or explosion resulting in injury. • ALWAYS be familiar with the air tools and accessories that are being used. Read the owner’s manual and be familiar with the operation and function of the air tools and accessories.
-
Page 7: Installation & Grounding
INSTALLATION & GROUNDING Lubrication and Oil: This compressor requires no lubrication or oiling. No break in procedure is required by the user. This product is factory tested to ensure proper operation and performance. Location of the Air Compressor: The air compressor should always be located in a clean, dry, and well-ventilated environment. -
Page 8: Component Diagram
COMPONENT DIAGRAM 1. Check valve 5. Outlet coupler 2. Safety valve 6. Pressure regulator 3. Line pressure gauge 7. Air tank drain valve 4. Tank pressure gauge www.purepowerequipment.com... -
Page 9: Operation
OPERATION Start-Up Procedures 1. Set the On/Off switch to the off position. 2. Check the air compressor visually for any damage or obstruction. 3. Close the drain valve. 4. Plug the power cord into the proper receptacle. 5. Turn the On/Off switch to the On position and the compressor should start 6. -
Page 10: Troubleshooting
TROUBLESHOOTING PROBLEM CAUSE SOLUTION Power cord not plugged in. Plug into proper outlet. Check outlet fuse and reset Motor does not start Outlet not working. Plug into a different outlet. Cord damaged. Repair or replace. Check outlet/circuit. Use a dedicated Low voltage supply. -
Page 11: Warranty
WARRANTY Pure Power Equipment warrants the original retail purchaser that this air compressor is free from defects in material and workmanship for the periods set forth below. If defects are found in Pure Power Equipment products within the limitations outlined in this warranty statement, Pure Power Equipment, at its sole discretion, will repair or replace the product free of charge. - Page 12 DO NOT RETURN THIS PRODUCT TO THE RETAILER CONTACT OUR CUSTOMER SERVICE if you need assistance with the assembly, operation, or if you experience a problem with your air compressor, please call 1-866-850-6662 Monday - Friday. 8AM to 430PM PST.
Need help?
Do you have a question about the PPAC053 and is the answer not in the manual?
Questions and answers