Do you have a question about the X30S and is the answer not in the manual?
Questions and answers
Summary of Contents for Dalen X30S
Page 2
center point Screen Width Screen Size Inch Inch Inch Inch Inch Inch Inch * The above parameters are based on the default data confirmed by the factory, and the wall surface is 2.8 meters. There may be slight deviation due to manual measurement.
Page 3
Ceiling Mounting Steps Mount the fixed bracket to the ceiling Press down the compression spring on the connector, and Stripping instruction insert the power cord into the connector. Tips: a.Input terminal is solid wire or stranded wire. b.Diameter of the power cable wire has to be18AWG/0.75mm (European standard) at least.
For a better product experience, the system will automatically upgrade upon initial startup Learn how DALEN Aladdin is used. Move the directional keys to control the keyboard when connected to the internet. The upgrade process will take approximately 5 to 10...
Page 5
How To Use Light How to use light Turn on / off light To use the remote control to operate, please turn on the power switch of the lamp. Turn on the light Turn off the light Press the switch button Press the switch button on the remote control again to turn off the...
About the Monitor Home Screen Click the arrow keys on the remote control to select content Show frequently used apps, recent apps, latest added apps. Click the home button on the remote control to return to the home page. ・ ・...
Page 7
Remove the outer lampshade, turn counterclockwise to remove the lampshade. Remove the decorative cover. main unit. Internal socket of the host. Take the host off the fixed bracket. Support the main unit with one hand, and hold the balance support handle with the other hand. While holding the support handle, push the control lever of Carefully support the main unit and remove it downwards.
Situation Reason Countermeasures Can't The light switch on the wall is off, so the Please turn on the light switch on the wall and operate it with the operate the remote cannot be operated. remote control again. remote Remove the shield, and operate the remote controller close to the There is a shield between the remote host.
FCC Warning This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1)This device may not cause harmful interference, and (2)this device must accept any interference received, including interference that may cause unde- sired operation.
Need help?
Do you have a question about the X30S and is the answer not in the manual?
Questions and answers