WAREMA climatronic 1002650 Operating And Installation Instructions

Sensor Inside temperature /
Humidity for
WAREMA climatronic®
Operating and Installation instructions
General information
Fig. 1 Sensor Inside temperature / Humidity
The Sensor Inside temperature / Humidity detects the room
temperature and relative humidity in rooms or in conserva-
tories.
Intended use
The Sensor Inside temperature / Humidity has been
developed for the collection of measurement values in
conjunction with a WAREMA climatronic. The approval of
the manufacturer must be obtained for uses outside of the
purposes listed in these instructions.
Function
The physical measuring variables are converted into elec-
trical signals for evaluation in the WAREMA climatronic.
Temperature-dependent function: The sun shading system
only moves in the desired direction when the temperature
limit programmed in the WAREMA climatronic has been
reached in the room. Humidity-dependent function: If the
limit values stored in the WAREMA climatronic are reached,
a window can be opened automatically or a fan can be
switched on, for example.
■ In addition to these instructions, note the information
and explanations in the installation instructions of the
WAREMA climatronic, art. no. 816853!
warema_890011_alhb_en_v4•2022-08-01
Safety instructions
WARNING
The electrical installation (assembly)/dis-
mantling must be performed by a certified
electrician in accordance with the electri-
cal installation regulations published by
the Association of German Electrical En-
gineers (VDE 0100) or the standards and
regulations of the country. The specialist
must observe the installation instructions
included with the electrical device.
WARNING
The sensor may only be operated with
safety extra low voltage.
WARNING
If hazard-free operation cannot be as-
sumed, the device may not be started or
must be deactivated. This assumption is
justified if
 T he enclosure or supply lines show
signs of damage,
 The device is no longer working.
WARNING
It is important to comply with the follow-
ing instructions in the interest of personal
safety.
Do not allow children to play with the operating elements
■
of the control or remote control. Store the remote controls
out of range from children!
Make sure that no persons or objects are in the range of
■
movement of the driven parts (blinds, window, etc.).
Disconnect the product from the supply voltage if cleaning
■
or other maintenance work must be performed.
We reserve the right to make technical modifications
Valid from
1 August 2022
Keep for future use.
1