Coolworks F-7332 Owner's Manual

CAUTION
Read Rules for Safe Operation and Instructions Carefully.
WARNING
1.To reduce the risk of fire or electrical shock, do not use this fan with any
solid-state speed control device.
2. If the supply cord is damaged, it must be replaced by the manufacturer or its
service agent or a similarity qualified person in order to avoid a hazard.
3. This appliance has a polarized plug (one blade is wider than the other). To
reduce the risk of electric shock, this plug is intended to fit in a polarized
outlet only one way. If the plug does not fit fully in the outlet, reverse the plug.
If it still does not fit, contact a qualified electrician. Do not attempt to defeat
this safety feature.
4. Do not leave the fan running unattended.
5. Do not run cord under carpeting. Do not cover cord with throw rugs, runners,
or similar coverings. Arrange cord away from traffic area and where it will not
be tripped over.
RULES FOR SAFE OPERATION
1. Never insert fingers, pencils, or any other objects through the fan housing
when the tower fan is running. Unplug the fan when moving it from one
location to another.
2. Disconnect the fan before cleaning.
3. To avoid overturning, be sure the fan is on a stable surface when operating it.
4. To reduce the risk of electric shock, DO NOT use the fan by a window.
MAIN PARTS
1. Tower fan
2. Rear base (with notch for power cord)
3. Front base
4. (3) Screws
5. Power supply cord
6. Front guard
7. Rear guard
8. Control Panel
PACKAGE CONTENTS
Tower fan
Rear Base
Front base
(3) screws (installed in base)
Instruction manual
2
OWNER'S MANUAL
OSCILLATING TOWER FAN
MODEL: F-7332
READ AND SAVE THESE INSTRUCTIONS
Customer Service: service@hena.ca
6
7
8
1
1
5
3
2
3
4