Ide Configuration - ASROCK 939DUAL-SATA2 User Manual

Suspend to RAM
Use this item to select whether to auto-detect or disable the Suspend-to-
RAM feature. Select [Auto] will enable this feature if the OS supports it. If
you set this item to [Disabled], the function "Repost Video on STR Resume"
will be hidden.
Repost Video on STR Resume
This feature allows you to repost video on STR resume. (STR refers to
suspend to RAM.)
Restore on AC/Power Loss
This allows you to set the power state after an unexpected AC/power
loss. If [Power Off] is selected, the AC/power remains off when the
power recovers. If [Power On] is selected, the AC/power resumes
and the system starts to boot up when the power recovers.
Ring-In Power On
Use this item to enable or disable Ring-In signals to turn on the system from
the power-soft-off mode.
PCI Devices Power On
Use this item to enable or disable PCI devices to turn on the system from the
power-soft-off mode.
PS/2 Keyboard Power On
Use this item to enable or disable PS/2 keyboard to turn on the system from
the power-soft-off mode.
RTC Alarm Power On
Use this item to enable or disable RTC (Real Time Clock) to power on the
system.

3.3.4 IDE Configuration

3.3.4 3.3.4 3.3.4 3.3.4 IDE Configuration IDE Configuration IDE Configuration IDE Configuration
BIOS SETUP UTILITY
Advanced
IDE Configuration
OnBoard IDE Controller [Both]
[Enabled]
OnBoard SATA Controller
[RAID]
SATA Operation Mode
[Enabled]
OnBoard SATAII Controller
[IDE]
SATAII Operation Mode
Primary IDE Master
[Hard Disk]
Primary IDE Slave
[Not Detected]
Secondary IDE Master
[ATAPI CDROM]
Secondary IDE Slave
[Not Detected]
SATA1
[Not Detected]
SATA2
[Not Detected]
SATAII [Not Detected]
v02.54 (C) Copyright 1985-2005, American Megatrends, Inc.
DISABLED: disables the
integrated IDE
Controller.
PRIMARY: enables only
the Primary IDE
Controller.
SECONDARY: enables
only the Secondary IDE
Controller.
BOTH: enables both IDE
Controllers.
Select Screen Select Screen
Select Item Select Item
+- +- Change Option Change Option
F1 F1 General Help General Help
F9 F9 Load Defaults Load Defaults
F10 F10 Save and Exit Save and Exit
ESC ESC Exit Exit
2 9 2 9 2 9 2 9 2 9