ASROCK 880GMH-LE USB3 Manual
Hide thumbs Also See for 880GMH-LE USB3:

Advertisement

Copyright Notice:
Copyright Notice:
Copyright Notice:
Copyright Notice:
Copyright Notice:
No part of this installation guide may be reproduced, transcribed, transmitted, or trans-
lated in any language, in any form or by any means, except duplication of documen-
tation by the purchaser for backup purpose, without written consent of ASRock Inc.
Products and corporate names appearing in this guide may or may not be registered
trademarks or copyrights of their respective companies, and are used only for identifica-
tion or explanation and to the owners' benefit, without intent to infringe.
Disclaimer:
Disclaimer:
Disclaimer:
Disclaimer:
Disclaimer:
Specifications and information contained in this guide are furnished for informational
use only and subject to change without notice, and should not be constructed as a
commitment by ASRock. ASRock assumes no responsibility for any errors or omissions
that may appear in this guide.
With respect to the contents of this guide, ASRock does not provide warranty of any kind,
either expressed or implied, including but not limited to the implied warranties or
conditions of merchantability or fitness for a particular purpose. In no event shall
ASRock, its directors, officers, employees, or agents be liable for any indirect, special,
incidental, or consequential damages (including damages for loss of profits, loss of
business, loss of data, interruption of business and the like), even if ASRock has been
advised of the possibility of such damages arising from any defect or error in the guide
or product.
This device complies with Part 15 of the FCC Rules. Operation is subject to the
following two conditions:
(1) this device may not cause harmful interference, and
(2) this device must accept any interference received, including interference that
may cause undesired operation.
CALIFORNIA, USA ONLY
The Lithium battery adopted on this motherboard contains Perchlorate, a toxic
substance controlled in Perchlorate Best Management Practices (BMP) regulations
passed by the California Legislature. When you discard the Lithium battery in
California, USA, please follow the related regulations in advance.
"Perchlorate Material-special handling may apply, see
www.dtsc.ca.gov/hazardouswaste/perchlorate"
ASRock Website: http://www.asrock.com
Copyright©2010 ASRock INC. All rights reserved.
ASRock
Published June 2010
880GMH-LE/USB3
Motherboard
1 1 1 1 1

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the 880GMH-LE USB3 and is the answer not in the manual?

Questions and answers

Summary of Contents for ASROCK 880GMH-LE USB3

  • Page 1 ASRock. ASRock assumes no responsibility for any errors or omissions that may appear in this guide. With respect to the contents of this guide, ASRock does not provide warranty of any kind, either expressed or implied, including but not limited to the implied warranties or conditions of merchantability or fitness for a particular purpose.
  • Page 2: Motherboard Layout

    Fourth SATAII Connector (SATAII_4, Blue) Serial Port Connector (COM1) SPI Flash Memory (8Mb) PCI Slots (PCI1-2) Southbridge Controller PCI Express 2.0 x16 Slot (PCIE2; Blue) Chassis Speaker Header PCI Express 2.0 x1 Slot (PCIE1; White) (SPEAKER 1, White) Northbridge Controller...
  • Page 3 VGA/DVI-D Port Microphone (Pink) PS/2 Keyboard Port (Purple) USB 2.0 Ports (USB01) * There are two LED next to the LAN port. Please refer to the table below for the LAN port LED indications. LAN Port LED Indications ACT/LINK SPEED...
  • Page 4: Package Contents

    ASRock’s commit- ment to quality and endurance. In this manual, chapter 1 and 2 contain introduction of the motherboard and step-by-step guide to the hardware installation. Chapter 3 and 4 contain the configuration guide to BIOS setup and information of the Support CD.
  • Page 5: Specifications

    Polymer Capacitors) - Support for Socket AM3 processors: AMD Phenom II X6 / X4 / X3 / X2 (except 920 / 940) / Athlon II X4 / X3 / X2 / Sempron processors - Six-Core CPU Ready - Supports ASRock UCC - Unlock CPU Core - Supports AMD’s Cool ‘n’...
  • Page 6 - 1 x RJ-45 LAN Port with LED (ACT/LINK LED and SPEED LED) - HD Audio Jack: Front Speaker/Microphone USB 3.0 - 1 x USB 3.0 port by Fresco FL1000G, supports USB 3.0 up to 5Gb/s Connector - 6 x Serial ATAII 3.0Gb/s connectors, support RAID (RAID 0, RAID 1, RAID 10 and JBOD), NCQ, AHCI and “Hot Plug”...
  • Page 7 Overclocking may affect your system stability, or even cause damage to the components and devices of your system. It should be done at your own risk and expense. We are not responsible for possible damage caused by overclocking.
  • Page 8 Before installing SATAII hard disk to SATAII connector, please read the “SATAII Hard Disk Setup Guide” on page 27 of “User Manual” in the support CD to adjust your SATAII hard disk drive to SATAII mode. You can also connect SATA hard disk to SATAII connector directly.
  • Page 9 10. The software name itself – OC DNA literally tells you what it is capable of. OC DNA, an exclusive utility developed by ASRock, provides a conve- nient way for the user to record the OC settings and share with others. It helps you to save your overclocking record under the operating system and simplifies the complicated recording process of overclocking settings.
  • Page 10: Pre-Installation Precautions

    Installation Installation Installation This is a Micro ATX form factor (9.6-in x 8.2-in, 24.4 cm x 20.8 cm) motherboard. Before you install the motherboard, study the configuration of your chassis to en- sure that the motherboard fits into it. Pre-installation Precautions...
  • Page 11: Installation Of Cpu Fan And Heatsink

    Step 4. When the CPU is in place, press it firmly on the socket while you push down the socket lever to secure the CPU. The lever clicks on the side tab to indicate that it is locked.
  • Page 12: Installation Of Memory Modules (Dimm)

    Unlock a DIMM slot by pressing the retaining clips outward. Step 2. Align a DIMM on the slot such that the notch on the DIMM matches the break on the slot. The DIMM only fits in one correct orientation. It will cause permanent damage to the motherboard and the DIMM if you force the DIMM into the slot at incorrect orientation.
  • Page 13: Expansion Slots (Pci And Pci Express Slots)

    2.4 Expansion Slots (PCI and PCI Express Slots) 2.4 Expansion Slots (PCI and PCI Express Slots) There are 2 PCI slots and 2 PCI Express slots on this motherboard. PCI Slots: PCI slots are used to install expansion cards that have the 32-bit PCI interface. PCIE Slots: PCIE1 (PCIE x1 slot;...
  • Page 14: Dual Monitor And Surround Display Features

    VGA card to this motherboard. This motherboard also provides independent display controllers for DVI-D, D-Sub and HDMI to support dual VGA output so that DVI-D, D-sub and HDMI can drive same or different display contents.
  • Page 15 [512MB] to enable the function of VGA/D-sub. Please make sure that the value you select is less than the total capability of the system memory. If you do not adjust the BIOS setup, the default value of “Share Memory”, [Auto], will disable VGA/D-Sub function when the add-on VGA card is inserted to this motherboard.
  • Page 16 Settings” tab so that you can adjust the parameters of the multi-monitor according to the steps below. A. Click the number ”2” icon. B. Click the items “This is my main monitor” and “Extend the desktop onto this monitor”. C. Click “OK” to save your change.
  • Page 17: Operation Guide

    VGA driver installed in your system. Step 5. Install the onboard VGA driver from our support CD to your system for both the onboard VGA and the discrete graphics card. Step 6. Restart your computer. Then you will find “ATI Catalyst Control Center” on ®...
  • Page 18 * Hybrid CrossFireX appearing here is a registered trademark of ATI Technologies Inc., and is used only for identification or explanation and to the owners’ benefit, without intent to infringe. * For further information of ATI Hybrid CrossFireX technology, please check AMD website for up dates and details.
  • Page 19: Jumpers Setup

    CLRCMOS1 for 5 seconds. However, please do not clear the CMOS right after you update the BIOS. If you need to clear the CMOS when you just finish updating the BIOS, you must boot up the system first, and then shut it down before you do the clear-CMOS action.
  • Page 20: Onboard Headers And Connectors

    Floppy Connector (33-pin FLOPPY1) (see p.2 No. 28) the red-striped side to Pin1 Note: Make sure the red-striped side of the cable is plugged into Pin1 side of the connector. Primary IDE connector (Blue) (39-pin IDE1, see p.2 No. 10)
  • Page 21 USB 2.0 Headers Besides five default USB 2.0 ports on the I/O panel, there are (9-pin USB6_7) three USB 2.0 headers on this (see p.2 No. 24) motherboard. Each USB 2.0 header can support two USB 2.0 ports. (9-pin USB8_9) (see p.2 No.
  • Page 22 Though this motherboard provides 4-Pin CPU fan (Quiet Fan) support, the 3-Pin CPU fan still can work successfully even without the fan speed control function. If you plan to connect the 3-Pin CPU fan to the CPU fan connector on this motherboard, please connect it to Pin 1-3.
  • Page 23 (see p.2 No. 8) Though this motherboard provides 24-pin ATX power connector, it can still work if you adopt a traditional 20-pin ATX power supply. To use the 20-pin ATX power supply, please plug your power supply along with Pin 1 and Pin 13.
  • Page 24: Driver Installation

    Driver Installation Guide Driver Installation Guide To install the drivers to your system, please insert the support CD to your optical drive first. Then, the drivers compatible to your system can be auto-detected and listed on the support CD driver page. Please follow the order from up to bottom side to install those required drivers.
  • Page 25: Installing Windows Vista

    Untied Overclocking function, please enter “Overclock Mode” option of BIOS setup to set the selection from [Auto] to [CPU, PCIE, Async.]. Therefore, CPU FSB is untied during overclocking, but PCI / PCIE buses are in the fixed mode so that FSB can operate under a more stable overclocking environment.
  • Page 26: Bios Information

    BIOS Setup utility; otherwise, POST continues with its test routines. If you wish to enter BIOS Setup after POST, please restart the system by pressing <Ctl> + <Alt> + <Delete>, or pressing the reset button on the system chassis. The BIOS Setup program is designed to be user-friendly.
  • Page 27 Wir danken Ihnen für den Kauf des ASRock 880GMH-LE/USB3 Motherboard, ein zuverlässiges Produkt, welches unter den ständigen, strengen Qualitätskontrollen von ASRock gefertigt wurde. Es bietet Ihnen exzellente Leistung und robustes Design, gemäß der Verpflichtung von ASRock zu Qualität und Halbarkeit.
  • Page 28: Spezifikationen

    - Alle Feste Kondensatordesign (100% in Japan gefertigte, erstklassige leitfähige Polymer-Kondensatoren) - Unterstützung von Socket AM3-Prozessoren: AMD Phenom II X6 / X4 / X3 / X2 (außer 920 / 940) / Athlon X4 / X3 / X2 / Sempron-Prozessor - Sechs-Kern-CPU-bereit - Unterstützt ASRock UCC - Unlock CPU Core...
  • Page 29 - 1 x VGA/DVI-D port - 1 x HDMI port - 5 x Standard-USB 2.0-Anschlüsse - 1 x Standard-USB 3.0-Anschlüsse - 1 x RJ-45 LAN Port mit LED (ACT/LINK LED und SPEED LED) - HD Audiobuchse: Audioeingang / Lautsprecher vorne / Mikrofon USB 3.0 - 1 x USB 3.0-Ports durch Fresco FL1000G;...
  • Page 30 Beachten Sie bitte, dass Overclocking, einschließlich der Einstellung im BIOS, Anwenden der Untied Overclocking-Technologie oder Verwenden von Overclocking-Werkzeugen von Dritten, mit einem gewissen Risiko behaftet ist. Overclocking kann sich nachteilig auf die Stabilität Ihres Systems auswirken oder sogar Komponenten und Geräte Ihres Systems beschädigen.
  • Page 31 Durch Betriebssystem-Einschränkungen kann die tatsächliche Speichergröße weniger als 4 GB betragen, da unter Windows ® 7 / Vista™ / XP etwas Speicher zur Nutzung durch das System reserviert wird. Unter Windows ® OS mit 64-Bit-CPU besteht diese Einschränkung nicht. Die Maximalspeichergröße ist von den Chipshändler definiert und umgetauscht.
  • Page 32 USB-Flash-Laufwerk oder die Festplatte das Dateisystem FAT32/16/12 benutzen muss. 10. Allein der Name – OC DNA* – beschreibt es wörtlich, was die Software zu leisten vermag. OC DNA ist ein von ASRock exklusiv entwickeltes Dienstprogramm, das Nutzern eine bequeme Möglichkeit bietet, Übertaktungseinstellungen aufzuzeichnen und sie Anderen mitzuteilen.
  • Page 33: Installation

    2. Installation 2. Installation 2. Installation Dies ist ein Motherboard mit einem Micro ATX-Formfaktor (9,6 Zoll x 8,2 Zoll, 24,4 cm x 20,8 cm). Vor Installation des Motherboards müssen Sie die Konfiguration Ihres Gehäuses dahingehend überprüfen, ob das Motherboard dort hineinpasst.
  • Page 34 2.1 CPU Installation 2.1 CPU Installation Schritt 1: Öffnen Sie den CPU-Sockel, indem sie den Hebel leicht zur Seite und dann nach oben ziehen, auf einen Winkel von 90°. Schritt 2: Positionieren Sie die CPU genau so über dem Sockel, dass sich die Ecke der CPU mit dem goldenen Dreieck exakt über der Ecke des...
  • Page 35 Zweikanal-Speichertechnologie zu aktivieren. Andernfalls erfolgt der Betrieb im Einkanal-Modus. 1. s ist nicht zulässig, DDR oder DDR2 in einen DDR3 Steckplatz zu installieren; andernfalls könnten Motherboard und DIMMs beschädigt werden. 2. Wenn Sie nur ein Speichermodul oder zwei nicht identische Speichermodule installieren, kann die Zweikanal-Speichertechnologie nicht aktiviert werden.
  • Page 36 Gehäuseschacht (Slot) , den Sie nutzen möchten und behalten die Schraube für den Einbau der Karte. Schritt 3: Richten Sie die Karte über dem Slot aus und drücken Sie sie ohne Gewalt hinein, bis sie den Steckplatz korrekt ausfüllt. Schritt 4: Befestigen Sie die Karte mit der Schraube aus Schritt 2.
  • Page 37 ® XP nicht verfügbar. Künftig soll ATI Hybrid CrossFireX jedoch auch vom Betriebssystem Windows ® unterstützt werden. Bei einem Besuch unserer Website können Sie sich darüber informieren. Detaillierte Bedienschritte und kompatible PCI Express-Grafikkarten sind auf Seite 17. ASRock 880GMH-LE/USB3 Motherboard...
  • Page 38: Einstellung Der Jumper

    +5VSB (Standby) zu setzen (siehe S.2, No. 1) und die PS/2 oder USB23- Weckfunktionen zu aktivieren. Hinweis: Um +5VSB nutzen zu können, muss das Netzteil auf dieser Leitung 2A oder mehr leisten können. USB_PW2 Überbrücken Sie Pin2, Pin3, um +5V_DUAL zu setzen und die (siehe S.2, No.
  • Page 39 (33-Pin FLOPPY1) die rotgestreifte Seite auf Stift 1 (siehe S.2, No. 28) Hinweis: Achten Sie darauf, dass die rotgestreifte Seite des Kabel mit der Stift 1- Seite des Anschlusses verbunden wird. Primärer IDE-Anschluss (blau) (39-pin IDE1, siehe S.2, No. 10)
  • Page 40 Serial ATA- (SATA-) Sie können beide Enden des Datenkabel SATA-Datenkabels entweder mit der SATA / SATAII- (Option) Festplatte oder dem SATAII- Anschluss am Mainboard verbinden. USB 2.0-Header Zusätzlich zu den fünf üblichen USB 2.0-Ports an den (9-pol. USB6_7) I/O-Anschlüssen befinden sich (siehe S.2 - No.
  • Page 41 Geräte), wobei jedoch die Bildschirmverdrahtung am Gehäuse HDA unterstützen muss, um richtig zu funktionieren. Beachten Sie bei der Installation im System die Anweisungen in unserem Handbuch und im Gehäusehandbuch. 2. Wenn Sie die AC’97-Audioleiste verwenden, installieren Sie diese wie nachstehend beschrieben an der Front-Audioanschlussleiste: A.
  • Page 42 Obwohl dieses Motherboard einen 24-pol. ATX-Stromanschluss bietet, kann es auch mit einem modifizierten traditionellen 20-pol. ATX-Netzteil verwendet werden. Um ein 20-pol. ATX-Netzteil zu verwenden, stecken Sie den Stecker mit Pin 1 und Pin 13 ein. Installation eines 20-pol. ATX-Netzteils Anschluss für...
  • Page 43 Anschließend werden die mit Ihrem System kompatiblen Treiber automatisch erkannt und auf dem Bildschirm angezeigt. Zur Installation der nötigen Treiber gehen Sie bitte der Reihe nach von oben nach unten vor. Nur so können die von Ihnen installierten Treiber richtig arbeiten.
  • Page 44 Wenn Sie Windows 7 / 7 64-Bit / Vista / Vista 64-Bit ohne RAID-Funktionalität auf Ihren SATA / SATAII-Festplatten installieren, gehen Sie bitte wie folgt vor. Verwendung von SATA / SATAII-Festplatten ohne NCQ und Hot-Plug- Funktionen SCHRITT 1: Konfigurieren Sie BIOS.
  • Page 45 Erscheint der Wilkommensbildschirm nicht, so “doppelklicken” Sie bitte auf das File ASSETUP.EXE im BIN-Verzeichnis der Support-CD, um die Menüs aufzurufen. Das Setup-Programm soll es Ihnen so leicht wie möglich machen. Es ist menügesteuert, d.h. Sie können in den verschiedenen Untermenüs Ihre Auswahl treffen und die Programme werden dann automatisch installiert.
  • Page 46: Contenu Du Paquet

    Contenu du paquet Contenu du paquet Carte mère ASRock 880GMH-LE/USB3 (Facteur de forme Micro ATX: 9.6 pouces x 8.2 pouces, 24.4 cm x 20.8 cm) Guide d’installation rapide ASRock 880GMH-LE/USB3 CD de soutien ASRock 880GMH-LE/USB3 Deux câble de données Serial ATA (SATA) (Optionnelle) Un écran I/O...
  • Page 47: Spécifications

    Japon) - Prise en charge des processeurs sur socket AM3: Processeur Phenom II X6 / X4 / X3 / X2 (sauf 920 / 940) / Athlon II X4 / X3 / X2 / Sempron d’AMD - Prêt pour processeurs Six-Core - Supporte ASRock UCC - Unlock CPU Core - Supporte la technologie Cool ‘n’...
  • Page 48 - br. 24 connecteur d’alimentation ATX - br. 4 connecteur d’alimentation 12V ATX - Connecteurs audio internes - Connecteur audio panneau avant - 3 x En-tête USB 2.0 (prendre en charge 6 ports USB 2.0 supplémentaires) BIOS - 8Mb BIOS AMI - BIOS AMI - Support du “Plug and Play”...
  • Page 49 - FCC, CE, WHQL - Prêt pour ErP/EuP (alimentation Prêt pour ErP/EuP requise) (voir ATTENTION 13) * Pour de plus amples informations sur les produits, s’il vous plaît visitez notre site web: http://www.asrock.com ATTENTION Il est important que vous réalisiez qu’il y a un certain risque à effectuer l’overclocking, y compris ajuster les réglages du BIOS, appliquer la technologie Untied Overclocking, ou...
  • Page 50 Avant d’installer le disque dur SATAII au connecteur SATAII, veuillez lire le Guide « Installation du disque dur SATAII » à la page 27 du « Manuel de l’utilisateur » qui se trouve sur le CD de support pour régler votre lecteur de disque dur SATAII au mode SATAII.
  • Page 51 EuP sont requises. Selon les suggestions d’Intel’, l’alimentation électrique EuP doit correspondre à la norme, qui est que l’efficacité électrique de 5v en mode de veille doit être supérieure à 50% pour 100 mA de consommation de courant. Pour choisir une alimentation électrique conforme à...
  • Page 52 2. Installation 2. Installation Il s’agit d’une carte mère à facteur de forme Micro ATX (9,6 po x 8,2 po, 24,4 cm x 20,8 cm). Avant d’installer la carte mère, étudiez la configuration de votre châssis pour vous assurer que la carte mère s’y insère.
  • Page 53 Etape 1. Déverrouillez le support en relevant le levier selon un angle de 90 Etape 2. Placer l’UC directement au-dessus de la prise pour que le coin de l’UC avec son triangle jaune coïncide avec le petit triangle dans le coin de la prise.
  • Page 54 DDR3 DIMM pour activer la technologie Dual Channel Memory. Sinon, le système fonctionnera en mode Canal unique. 1. Il n’est pas permis d’installer de la DDR ou DDR2 sur le slot DDR3; la carte mère et les DIMM pourraient être endommagés.
  • Page 55: Installation D'une Carte D'extension

    Slot d’extension (Slots PCI et Slots PCI Express) Slot d’extension (Slots PCI et Slots PCI Express) Il y a 2 ports PCI et 2 ports PCI Express sur la carte mère 880GMH-LE/USB3. Slots PCI: Les slots PCI sont utilisés pour installer des cartes d’extension dotées d’une interface PCI 32 bits.
  • Page 56 (voir p.2 fig. 1) (standby) et permettre aux périphériques PS/2 ou USB23 de réveiller le système. Note: Pour sélectionner +5VSB, il faut obligatoirement 2 Amp et un courant standby supérieur fourni par l’alimentation. USB_PW2 Court-circuitez les broches 2 et 3 pour choisir +5V_DUAL (voir p.2 fig.
  • Page 57 Toutefois, veuillez ne pas effacer la CMOS tout de suite après avoir mis le BIOS à jour. Si vous avez besoin d’effacer la CMOS lorsque vous avez fini de mettre le BIOS à jour, vous devez d’abord initialiser le système, puis le mettre hors tension avant de procéder à...
  • Page 58 (SATAII_6: voir p.2 fig. 12) aller jusqu’à 3,0 Go/s. SATAII_1 SATAII_2 SATAII_3 Câble de données Toute cote du cable de data SATA Série ATA (SATA) peut etre connecte au disque dur SATA / SATAII ou au connecteur (en option) SATAII sur la carte mere.
  • Page 59 (voir p.2 fig. 30) audio. 1. L’audio à haute définition (HDA) prend en charge la détection de fiche, mais le fil de panneau sur le châssis doit prendre en charge le HDA pour fonctionner correctement. Veuillez suivre les instructions dans notre manuel et le manuel de châssis afin installer votre système.
  • Page 60 (Ventilateur silencieux) ventilateur de CPU à 4 broches , le ventilateur de CPU à 3 broches peut bien fonctionner même sans la fonction de commande de vitesse du ventilateur. Si vous prévoyez de connecter le ventilateur de CPU à...
  • Page 61: 64-Bit / Vista

    Puis, les pilotes compatibles avec votre système peuvent être détectés automatiquement et sont listés sur la page du pilote du CD. Veuillez suivre l’ordre de haut en bas sur le côté pour installer les pilotes requis. En conséquence, les pilotes que vous installez peuvent fonctionner correctement.
  • Page 62 7 / 7 64-bit / Vista / Vista 64-bit sur vos disques durs SATA / SATAII sans les fonctions RAID, veuillez suivre la procédure ci-dessous. Utilisation des disques durs SATA / SATAII sans NCQ et les fonctions de connexion à chaud ETAP 1: Configurez le BIOS.
  • Page 63: Informations Sur Le Cd De Support

    BIOS après le POST, veuillez redémarrer le système en pressant <Ctl> + <Alt> + <Suppr>, ou en pressant le bouton de reset sur le boîtier du système. Vous pouvez également redémarrer en éteignant le système et en le rallumant.
  • Page 64 Grazie per aver scelto una scheda madre ASRock 880GMH-LE/USB3, una scheda madre affidabile prodotta secondo i severi criteri di qualità ASRock. Le prestazioni eccellenti e il design robusto si conformano all’impegno di ASRock nella ricerca della qualità e della resistenza. Questa Guida Rapida all’Installazione contiene l’introduzione alla motherboard e la guida passo-passo all’installazione.
  • Page 65 Processore - Supporto di processori Socket AM3: AMD Phenom II X6 / X4 / X3 / X2 (fatta eccezione per 920 / 940) / Athlon II X4 / X3 / X2 / Sempron - CPU Six-Core Ready - Supporto ASRock UCC - Unlock CPU Core - Supporto tecnologia AMD Cool ‘n’...
  • Page 66 - Connettore HD Audio: ingresso linea / cassa frontale / microfono USB 3.0 - 1 x Porte USB3.0 FL1000G Fresco, supporto di USB 3.0 fino a 5Gb/s Connettori - 6 x connettori SATAII 3.0Go/s, sopporta RAID (RAID 0, RAID 1, RAID 10 e JBOD), NCQ, AHCI e “Collegamento a caldo”...
  • Page 67 * Per ulteriori informazioni, prego visitare il nostro sito internet: http://www.asrock.com AVVISO Si prega di prendere atto che la procedura di overclocking implica dei rischi, come anche la regolazione delle impostazioni del BIOS, l’applicazione della tecnologia Untied Overclocking Technology, oppure l’uso di strumenti di overclocking forniti da terzi. L’overclocking può...
  • Page 68 Prego fare riferimento al sito internet AMD per le ultime informazioni. Prima di installare il disco rigido SATAII con il connettore SATAII, leggere la “Guida per la configurazione del disco rigido SATAII” a pagina 27 del “Manuale utente”...
  • Page 69 (dischi floppy) o altre complicate utilità Flash. Si prega di notare che l’unità Flash USB o il disco rigido devono usare il File System FAT32/16/ 10. Il nome stesso del software – OC DNA – dice di cosa è capace. OC DNA, una utilità esclusiva sviluppata da ASRock, fornisce un modo comodo per registrare le impostazioni OC e condividerle con gli altri.
  • Page 70 2. Installazione Questa è una scheda madre con Form Factor Micro ATX (9.6 pollici x 8.2 pollici; 24,4 cm x 20,8 cm). Prima di installare la scheda madre, studiare la configurazione del telaio per assicurarsi che la scheda madre vi si adatti.
  • Page 71 2.1 Installazione del processore Step 1. Aprire lo zoccolo sollevando la leva da un angolo di 90°. Step 2. Posizionare la CPU direttamente sopra la presa in modo tale che l’angolo della CPU con il triangolo dorato corrisponda all’angolo della presa con il triangolino.
  • Page 72 2.3 Installazione dei moduli di memoria (DIMM) La motherboard 880GMH-LE/USB3 dispone di due slot DIMM DDR3 (Double Data Rate 3) a 240 pin e supporta la tecnologia Dual Channel Memory. Per attivare la configurazione Dual Channel Memory bisogna installare sempre due moduli di memoria identici (stessa marca, velocità, dimensioni e tipo di chip) negli slot DIMM.
  • Page 73 Step 2. Rimuovere i ganci sullo slot che si intende utilizzare. Tenere a portata di mano le viti. Step 3. Allineare il connettore della scheda con lo slot e premere con decisione finché...
  • Page 74 Quando il ponticello è posizionato sui pin, il jumper è “CORTOCIRCUITATO”. Se sui pin non ci sono ponticelli, il jumper è “APERTO”. L’illustrazione mostra un jumper a 3 pin in cui il pin1 e il pin2 sono “CORTOCIRCUITATI” quando il ponticello è CORTOCIRCUITATO APERTO posizionato su questi pin.
  • Page 75 (33-pin FLOPPY1) (vedi p.2 item 28) Lato del Pin1 con la striscia rossa Nota: Assicurarsi che il lato del cavo con la striscia rossa sia inserito nel lato Pin1 del connettore. Connettore IDE primario (blu) (39-pin IDE1, vedi p.2 Nr. 10)
  • Page 76 Cavi dati Serial ATA (SATA) Entrambe le estremità del cavo dati SATA possono collegarsi (Opzionale) all’hard disk SATA / SATAII o al connettore SATAII sulla scheda madre. Collettore USB 2.0 Oltre alle cinque porte USB 2.0 predefinite nel pannello I/O, la...
  • Page 77 1. La caratteristica HDA (High Definition Audio) supporta il rilevamento dei connettori, però il pannello dei cavi sul telaio deve supportare la funzione HDA (High Definition Audio) per far sì che questa operi in modo corretto. Attenersi alle istruzioni del nostro manuale e del manuale del telaio per installare il sistema.
  • Page 78 Sebbene la presente scheda madre disponga di un supporto per ventola CPU a 4 piedini (ventola silenziosa), la ventola CPU a 3 piedini è in grado di funzionare anche senza la funzione di controllo della velocità della ventola. Se si intende collegare la ventola CPU a 3 piedini al connettore della ventola CPU su questa scheda madre, collegarla ai piedini 1-3.
  • Page 79 Quindi, i driver compatibili con il sistema vengono rilevati automaticamente ed elencati nella pagina del driver del CD in dotazione. Per l’installazione dei driver necessari, procedere in base ad un ordine dall’alto verso il basso. In tal modo, i driver installati funzioneranno correttamente.
  • Page 80 / Vista 64 bit sui dischi rigidi SATA / SATAII senza funzioni RAID, seguire le istruzioni in basso. Utilizzo dei dischi rigidi SATA / SATAII privi di funzioni NCQ e Hot Plug 1° PASSO: Configurare il BIOS. Entrare in UTILIT...
  • Page 81 BIOS; altrimenti, POST continua con i suoi test di routine. Per entrare il BIOS Setup dopo il POST, riavvia il sistema premendo <Ctl> + <Alt> + <Delete>, o premi il tasto di reset sullo chassis del sistema. El BIOS Setup Utility es diseñádo “user-friendly”.
  • Page 82 ASRock. Esta Guía rápida de instalación contiene una introducción a la placa base y una guía de instalación paso a paso. Puede encontrar una información más detallada sobre la placa base en el manual de usuario incluido en el CD de soporte.
  • Page 83 Especificación Especificación Especificación Plataforma - Factor forma Micro ATX: 24,4 cm x 20,8 cm, 9,6” x 8,2” - Todo diseño de Capacitor Sólido (condensadores de polímero conductor de alta calidad 100% fabricados en Japón) Procesador - Compatibilidad con procesadores con conector AM3:...
  • Page 84 - 5 x puertos USB 2.0 predeterminados - 1 x puerto USB 3.0 predeterminados - 1 x Puerto LAN RJ-45 con LED (LED de ACCIÓN/ENLACE y LED de VELOCIDAD) - Conexión de audio: Entrada de línea / Altavoz frontal / Micrófono...
  • Page 85 ADVERTENCIA Tenga en cuenta que hay un cierto riesgo implícito en las operaciones de aumento de la velocidad del reloj, incluido el ajuste del BIOS, aplicando la tecnología de aumento de velocidad liberada o utilizando las herramientas de aumento de velocidad de otros fabricantes.
  • Page 86 Esta placa base soporta Tecnología de Memoria de Doble Canal. Antes de implementar la Tecnología de Memoria de Doble Canal, asegúrese de leer la guía de instalación de módulos de memoria en la página 91 para su correcta instalación. Que la velocidad de memoria de 1800/1600 MHz se admita o no se admita, depende de la configuración AM3 Procesador que adopte.
  • Page 87 ASRock Instant Flash. Ejecute esta herramienta y guarde el archivo correspondiente al sistema BIOS nuevo en su unidad flash USB, unidad de disco flexible o disco duro para poder actualizar el BIOS con sólo pulsar un par de botones, sin necesidad de preparar un disco flexible adicional ni utilizar complicadas utilidades de programación.
  • Page 88 Unión Europea para establecer el consumo total de energía de un sistema. Según la disposición EuP, la alimentación de CA total para el sistema completo ha de ser inferior a 1,00W en modo apagado. Para cumplir con el estándar EuP, se requieren una placa base y una fuente de alimentación que cumplan con...
  • Page 89: Instalación

    2. Instalación 2. Instalación Esta placa base tiene un factor de forma Micro ATX (9,6 pulgadas x 8,2 pulgadas, 24,4 cm. x 20,8 cm). Antes de instalar la placa base, estudie la configuración de su chasis para asegurarse de que la placa base cabe en él.
  • Page 90: Instalación Del

    Paso 3. Coloque cuidosamente el CPU en el zócalo. El CPU se encaja al zócalo a una sola orientación. No esfuerce el CPU en el zócalo para prevenir encorvados de los pins del CPU. Si no puede encajar el CPU, examine su orientación o examine si los pins están ya...
  • Page 91: Instalación De Memoria

    2.3 Instalación de Memoria La placa base 880GMH-LE/USB3 proporciona dos ranuras DIMM DDR3 (Double Data Rate 3, es decir, Tasa doble de datos) de 240 contactos y es compatible con la Tecnología de memoria de canal dual. Para la configuración de canal dual, siempre es necesario instalar dos módulos de memoria idénticos (la misma marca,...
  • Page 92 Paso 2. Quite la tapa que corresponde a la ranura que desea utilizar. Paso 3. Encaje el conector de la tarjeta a la ranura. Empuje firmemente la tarjeta en la ranura. Paso 4. Asegure la tarjeta con tornillos.
  • Page 93 3 para habilitar +5VSB (vea p.2, No. 1) (standby) para PS/2 o USB23 wake up events. Atención: Para elegir +5VSB, se necesita corriente mas que 2 Amp proveida por la fuente de electricidad. USB_PW2 Ponga en cortocircuito pin 2, pin 3 para habilitar +5V_DUAL (vea p.2, No.
  • Page 94 (vea p.2, No. 28) la banda roja debe quedar en el mismo lado que el contacto 1 Atención: Asegúrese que la banda roja del cable queda situado en el mismo lado que el contacto 1 de la conexión. IDE conector primario (azul) (39-pin IDE1, vea p.2, No.
  • Page 95 Cable de datos de Ambos extremos del cable serie ATA (SATA) pueden conectarse al disco duro SATA / SATAII o la (Opcional) conexión de la placa base. Cabezal USB 2.0 Además de cinco puertos USB 2.0 predeterminados en el (9-pin USB6_7) panel de E/S, hay tres bases (ver p.2, No.
  • Page 96 2. Si utiliza el panel de sonido AC’97, instálelo en la cabecera de sonido del panel frontal de la siguiente manera: A. Conecte Mic_IN (MIC) a MIC2_L.
  • Page 97 Si pretende enchufar el ventilador de procesador de 3 contactos en el conector del ventilador de procesador de esta placa base, conéctelo al contacto 1-3. Contacto 1-3 conectado Instalación del ventilador de 3 contactos...
  • Page 98 Guía de instalación del controlador Guía de instalación del controlador Para instalar los controladores en el sistema, inserte en primer lugar el CD de soporte en la unidad óptica. A continuación, se detectarán automáticamente los controladores compatibles con el sistema y se mostrarán en la página de controladores de CD compatibles.
  • Page 99 / Vista 64 bits en sus HDDs SATA / SATAII sin funciones RAID, por favor siga los pasos siguientes. Uso de dispositivos SATA / SATAII sin funciones NCQ y de Conexión en Caliente PASO 1: Configure BIOS. Entre a la Utilidad de configuración de BIOS pantalla de Avanzada Configuración Storage.
  • Page 100 / Vista / Vista 64 bits / XP / XP Media Center / XP 64 bits El CD de instalación que acompaña la placa-base trae todos los drivers y programas utilitarios para instalar y configurar la placa-base. Para iniciar la instalación, ponga el CD en el lector de CD y se desplegará...
  • Page 101 ASRock. ASRock Micro ATX: 9,6 x 8,2 / 24,4 x 20,8 ASRock ASRock Serial ATA (SATA) ( 1 0 1 1 0 1 1 0 1 1 0 1 1 0 1 ASRock 880GMH-LE/USB3 Motherboard...
  • Page 102 9,6 x 8,2 / 24,4 x 20,8 1 0 2 1 0 2 1 0 2 1 0 2 1 0 2 ASRock 880GMH-LE/USB3 Motherboard...
  • Page 103 Hot-Plug 1 0 3 1 0 3 1 0 3 1 0 3 1 0 3 ASRock 880GMH-LE/USB3 Motherboard...
  • Page 104 1 0 4 1 0 4 1 0 4 1 0 4 1 0 4 ASRock 880GMH-LE/USB3 Motherboard...
  • Page 105 1 0 5 1 0 5 1 0 5 1 0 5 1 0 5 ASRock 880GMH-LE/USB3 Motherboard...
  • Page 106 1 0 6 1 0 6 1 0 6 1 0 6 1 0 6 ASRock 880GMH-LE/USB3 Motherboard...
  • Page 107 1 0 7 1 0 7 1 0 7 1 0 7 1 0 7 ASRock 880GMH-LE/USB3 Motherboard...
  • Page 108 1 0 8 1 0 8 1 0 8 1 0 8 1 0 8 ASRock 880GMH-LE/USB3 Motherboard...
  • Page 109 880GMH-LE/USB3 DDR3 (Double Data Rate 3) DIMM Dual Channel M emory Technology DDR3 DIMM Dual Channel Memory Technology DIMM DIMM DIMM 1 0 9 1 0 9 1 0 9 1 0 9 1 0 9 ASRock 880GMH-LE/USB3 Motherboard...
  • Page 110 1 1 0 1 1 0 1 1 0 1 1 0 1 1 0 ASRock 880GMH-LE/USB3 Motherboard...
  • Page 111 Short Open CMOS CMOS 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 ASRock 880GMH-LE/USB3 Motherboard...
  • Page 112 1 SATAII_4 SATAII_5 SATAII_6 SATAII_1 SATAII_2 SATAII_3 1 1 2 1 1 2 1 1 2 1 1 2 1 1 2 ASRock 880GMH-LE/USB3 Motherboard...
  • Page 113 IR1) 1 1 3 1 1 3 1 1 3 1 1 3 1 1 3 ASRock 880GMH-LE/USB3 Motherboard...
  • Page 114 PANEL1) 1 1 4 1 1 4 1 1 4 1 1 4 1 1 4 ASRock 880GMH-LE/USB3 Motherboard...
  • Page 115 1 2 3 4 ATX. 12V- ATX ATX 12 COM- 1 1 5 1 1 5 1 1 5 1 1 5 1 1 5 ASRock 880GMH-LE/USB3 Motherboard...
  • Page 116 1 1 6 1 1 6 1 1 6 1 1 6 1 1 6 ASRock 880GMH-LE/USB3 Motherboard...
  • Page 117 1 1 7 1 1 7 1 1 7 1 1 7 1 1 7 ASRock 880GMH-LE/USB3 Motherboard...
  • Page 118 BIOS Setup Power-On-Self-Test – POST POST BIOS Setup POST Ctrl> + <Alt> + <Delete BIOS Setup 1 1 8 1 1 8 1 1 8 1 1 8 1 1 8 ASRock 880GMH-LE/USB3 Motherboard...
  • Page 119 1 1 9 1 1 9 1 1 9 1 1 9 1 1 9 ASRock 880GMH-LE/USB3 Motherboard...
  • Page 120 ‘ ’ ® 1 2 0 1 2 0 1 2 0 1 2 0 1 2 0 ASRock 880GMH-LE/USB3 Motherboard...
  • Page 121 1 2 1 1 2 1 1 2 1 1 2 1 1 2 1 ASRock 880GMH-LE/USB3 Motherboard...
  • Page 122 ® 1 2 2 1 2 2 1 2 2 1 2 2 1 2 2 ASRock 880GMH-LE/USB3 Motherboard...
  • Page 123 “ ” ® ® “ ” “ ” ® 1 2 3 1 2 3 1 2 3 1 2 3 1 2 3 ASRock 880GMH-LE/USB3 Motherboard...
  • Page 124 ® 1 2 4 1 2 4 1 2 4 1 2 4 1 2 4 ASRock 880GMH-LE/USB3 Motherboard...
  • Page 125 1 2 5 1 2 5 1 2 5 1 2 5 1 2 5 ASRock 880GMH-LE/USB3 Motherboard...
  • Page 126 1 2 6 1 2 6 1 2 6 1 2 6 1 2 6 ASRock 880GMH-LE/USB3 Motherboard...
  • Page 127 1 2 7 1 2 7 1 2 7 1 2 7 1 2 7 ASRock 880GMH-LE/USB3 Motherboard...
  • Page 128 ® ® ® 1 2 8 1 2 8 1 2 8 1 2 8 1 2 8 ASRock 880GMH-LE/USB3 Motherboard...
  • Page 129 “ ” “ ” “ ” “ ” “ ” 1 2 9 1 2 9 1 2 9 1 2 9 1 2 9 ASRock 880GMH-LE/USB3 Motherboard...
  • Page 130 SATAII_4 SATAII_5 SATAII_6 SATAII_1 SATAII_2 SATAII_3 1 3 0 1 3 0 1 3 0 1 3 0 1 3 0 ASRock 880GMH-LE/USB3 Motherboard...
  • Page 131 1 3 1 1 3 1 1 3 1 1 3 1 1 3 1 ASRock 880GMH-LE/USB3 Motherboard...
  • Page 132 1 2 3 4 1 3 2 1 3 2 1 3 2 1 3 2 1 3 2 ASRock 880GMH-LE/USB3 Motherboard...
  • Page 133 1 3 3 1 3 3 1 3 3 1 3 3 1 3 3 ASRock 880GMH-LE/USB3 Motherboard...
  • Page 134 ® ® ® ® ® ® ® 1 3 4 1 3 4 1 3 4 1 3 4 1 3 4 ASRock 880GMH-LE/USB3 Motherboard...
  • Page 135 ® ® ® ® 1 3 5 1 3 5 1 3 5 1 3 5 1 3 5 ASRock 880GMH-LE/USB3 Motherboard...
  • Page 136 “ ” “ ” 1 3 6 1 3 6 1 3 6 1 3 6 1 3 6 ASRock 880GMH-LE/USB3 Motherboard...
  • Page 137 1 3 7 1 3 7 1 3 7 1 3 7 1 3 7 ASRock 880GMH-LE/USB3 Motherboard...
  • Page 138 ‘ ’ ® 1 3 8 1 3 8 1 3 8 1 3 8 1 3 8 ASRock 880GMH-LE/USB3 Motherboard...
  • Page 139 1 3 9 1 3 9 1 3 9 1 3 9 1 3 9 ASRock 880GMH-LE/USB3 Motherboard...
  • Page 140 ® ® ® 1 4 0 1 4 0 1 4 0 1 4 0 1 4 0 ASRock 880GMH-LE/USB3 Motherboard...
  • Page 141 “ ” ® ® ® 1 4 1 1 4 1 1 4 1 1 4 1 1 4 1 ASRock 880GMH-LE/USB3 Motherboard...
  • Page 142 ® – 1 4 2 1 4 2 1 4 2 1 4 2 1 4 2 ASRock 880GMH-LE/USB3 Motherboard...
  • Page 143 1 4 3 1 4 3 1 4 3 1 4 3 1 4 3 ASRock 880GMH-LE/USB3 Motherboard...
  • Page 144 1 4 4 1 4 4 1 4 4 1 4 4 1 4 4 ASRock 880GMH-LE/USB3 Motherboard...
  • Page 145 1 4 5 1 4 5 1 4 5 1 4 5 1 4 5 ASRock 880GMH-LE/USB3 Motherboard...
  • Page 146 ® ® ® 1 4 6 1 4 6 1 4 6 1 4 6 1 4 6 ASRock 880GMH-LE/USB3 Motherboard...
  • Page 147 1 4 7 1 4 7 1 4 7 1 4 7 1 4 7 ASRock 880GMH-LE/USB3 Motherboard...
  • Page 148 SATAII_4 SATAII_5 SATAII_6 SATAII_1 SATAII_2 SATAII_3 1 4 8 1 4 8 1 4 8 1 4 8 1 4 8 ASRock 880GMH-LE/USB3 Motherboard...
  • Page 149 1 4 9 1 4 9 1 4 9 1 4 9 1 4 9 ASRock 880GMH-LE/USB3 Motherboard...
  • Page 150 1 2 3 4 1 5 0 1 5 0 1 5 0 1 5 0 1 5 0 ASRock 880GMH-LE/USB3 Motherboard...
  • Page 151 1 5 1 1 5 1 1 5 1 1 5 1 1 5 1 ASRock 880GMH-LE/USB3 Motherboard...
  • Page 152 ® ® ® ® ® ® ® 1 5 2 1 5 2 1 5 2 1 5 2 1 5 2 ASRock 880GMH-LE/USB3 Motherboard...
  • Page 153 ® ® ® ® 1 5 3 1 5 3 1 5 3 1 5 3 1 5 3 ASRock 880GMH-LE/USB3 Motherboard...
  • Page 154 ® ® 1 5 4 1 5 4 1 5 4 1 5 4 1 5 4 ASRock 880GMH-LE/USB3 Motherboard...
  • Page 155 1 5 5 1 5 5 1 5 5 1 5 5 1 5 5 ASRock 880GMH-LE/USB3 Motherboard...
  • Page 156 ‘ ’ ™ ® 1 5 6 1 5 6 1 5 6 1 5 6 1 5 6 ASRock 880GMH-LE/USB3 Motherboard...
  • Page 157 1 5 7 1 5 7 1 5 7 1 5 7 1 5 7 ASRock 880GMH-LE/USB3 Motherboard...
  • Page 158 ® ® 1 5 8 1 5 8 1 5 8 1 5 8 1 5 8 ASRock 880GMH-LE/USB3 Motherboard...
  • Page 159 ® ® ® ® 1 5 9 1 5 9 1 5 9 1 5 9 1 5 9 ASRock 880GMH-LE/USB3 Motherboard...
  • Page 160 ® 1 6 0 1 6 0 1 6 0 1 6 0 1 6 0 ASRock 880GMH-LE/USB3 Motherboard...
  • Page 161 1 6 1 1 6 1 1 6 1 1 6 1 1 6 1 ASRock 880GMH-LE/USB3 Motherboard...
  • Page 162 1 6 2 1 6 2 1 6 2 1 6 2 1 6 2 ASRock 880GMH-LE/USB3 Motherboard...
  • Page 163 1 6 3 1 6 3 1 6 3 1 6 3 1 6 3 ASRock 880GMH-LE/USB3 Motherboard...
  • Page 164 ® ® ® 1 6 4 1 6 4 1 6 4 1 6 4 1 6 4 ASRock 880GMH-LE/USB3 Motherboard...
  • Page 165 1 6 5 1 6 5 1 6 5 1 6 5 1 6 5 ASRock 880GMH-LE/USB3 Motherboard...
  • Page 166 SATAII_4 SATAII_5 SATAII_6 SATAII_1 SATAII_2 SATAII_3 1 6 6 1 6 6 1 6 6 1 6 6 1 6 6 ASRock 880GMH-LE/USB3 Motherboard...
  • Page 167 1 6 7 1 6 7 1 6 7 1 6 7 1 6 7 ASRock 880GMH-LE/USB3 Motherboard...
  • Page 168 1 2 3 4 1 6 8 1 6 8 1 6 8 1 6 8 1 6 8 ASRock 880GMH-LE/USB3 Motherboard...
  • Page 169 1 6 9 1 6 9 1 6 9 1 6 9 1 6 9 ASRock 880GMH-LE/USB3 Motherboard...
  • Page 170 ® ® ® ® ® ® ® 1 7 0 1 7 0 1 7 0 1 7 0 1 7 0 ASRock 880GMH-LE/USB3 Motherboard...
  • Page 171 ® ® ® ® 1 7 1 1 7 1 1 7 1 1 7 1 1 7 1 ASRock 880GMH-LE/USB3 Motherboard...
  • Page 172 ® ® 1 7 2 1 7 2 1 7 2 1 7 2 1 7 2 ASRock 880GMH-LE/USB3 Motherboard...
  • Page 173 1 7 3 1 7 3 1 7 3 1 7 3 1 7 3 ASRock 880GMH-LE/USB3 Motherboard...
  • Page 174 1 7 4 1 7 4 1 7 4 1 7 4 1 7 4 ASRock 880GMH-LE/USB3 Motherboard...
  • Page 175 ® 1 7 5 1 7 5 1 7 5 1 7 5 1 7 5 ASRock 880GMH-LE/USB3 Motherboard...
  • Page 176 1 7 6 1 7 6 1 7 6 1 7 6 1 7 6 ASRock 880GMH-LE/USB3 Motherboard...
  • Page 177 ® ® 1 7 7 1 7 7 1 7 7 1 7 7 1 7 7 ASRock 880GMH-LE/USB3 Motherboard...
  • Page 178 ® ® ® ® 1 7 8 1 7 8 1 7 8 1 7 8 1 7 8 ASRock 880GMH-LE/USB3 Motherboard...
  • Page 179 ® 1 7 9 1 7 9 1 7 9 1 7 9 1 7 9 ASRock 880GMH-LE/USB3 Motherboard...
  • Page 180 1 8 0 1 8 0 1 8 0 1 8 0 1 8 0 ASRock 880GMH-LE/USB3 Motherboard...
  • Page 181 1 8 1 1 8 1 1 8 1 1 8 1 1 8 1 ASRock 880GMH-LE/USB3 Motherboard...
  • Page 182 1 8 2 1 8 2 1 8 2 1 8 2 1 8 2 ASRock 880GMH-LE/USB3 Motherboard...
  • Page 183 ® ® ® 1 8 3 1 8 3 1 8 3 1 8 3 1 8 3 ASRock 880GMH-LE/USB3 Motherboard...
  • Page 184 1 8 4 1 8 4 1 8 4 1 8 4 1 8 4 ASRock 880GMH-LE/USB3 Motherboard...
  • Page 185 SATAII_4 SATAII_5 SATAII_6 SATAII_1 SATAII_2 SATAII_3 1 8 5 1 8 5 1 8 5 1 8 5 1 8 5 ASRock 880GMH-LE/USB3 Motherboard...
  • Page 186 1 8 6 1 8 6 1 8 6 1 8 6 1 8 6 ASRock 880GMH-LE/USB3 Motherboard...
  • Page 187 1 2 3 4 1 8 7 1 8 7 1 8 7 1 8 7 1 8 7 ASRock 880GMH-LE/USB3 Motherboard...
  • Page 188 1 8 8 1 8 8 1 8 8 1 8 8 1 8 8 ASRock 880GMH-LE/USB3 Motherboard...
  • Page 189 ® ® ® ® ® ® ® 1 8 9 1 8 9 1 8 9 1 8 9 1 8 9 ASRock 880GMH-LE/USB3 Motherboard...
  • Page 190 ® ® ® ® 1 9 0 1 9 0 1 9 0 1 9 0 1 9 0 ASRock 880GMH-LE/USB3 Motherboard...
  • Page 191 ® ® ® 1 9 1 1 9 1 1 9 1 1 9 1 1 9 1 ASRock 880GMH-LE/USB3 Motherboard...
  • Page 192 1 9 2 1 9 2 1 9 2 1 9 2 1 9 2 ASRock 880GMH-LE/USB3 Motherboard...
  • Page 193 1 9 3 1 9 3 1 9 3 1 9 3 1 9 3 ASRock 880GMH-LE/USB3 Motherboard...
  • Page 194 1 9 4 1 9 4 1 9 4 1 9 4 1 9 4 ASRock 880GMH-LE/USB3 Motherboard...
  • Page 195 1 9 5 1 9 5 1 9 5 1 9 5 1 9 5 ASRock 880GMH-LE/USB3 Motherboard...
  • Page 196 1 9 6 1 9 6 1 9 6 1 9 6 1 9 6 ASRock 880GMH-LE/USB3 Motherboard...
  • Page 197 1 9 7 1 9 7 1 9 7 1 9 7 1 9 7 ASRock 880GMH-LE/USB3 Motherboard...
  • Page 198 1 9 8 1 9 8 1 9 8 1 9 8 1 9 8 ASRock 880GMH-LE/USB3 Motherboard...
  • Page 199 1 9 9 1 9 9 1 9 9 1 9 9 1 9 9 ASRock 880GMH-LE/USB3 Motherboard...
  • Page 200 2 0 0 2 0 0 2 0 0 2 0 0 2 0 0 ASRock 880GMH-LE/USB3 Motherboard...
  • Page 201 2 0 1 2 0 1 2 0 1 2 0 1 2 0 1 ASRock 880GMH-LE/USB3 Motherboard...
  • Page 202 Short Open Default Clear CMOS 2 0 2 2 0 2 2 0 2 2 0 2 2 0 2 ASRock 880GMH-LE/USB3 Motherboard...
  • Page 203 SATAII_4 SATAII_5 SATAII_6 SATAII_1 SATAII_2 SATAII_3 2 0 3 2 0 3 2 0 3 2 0 3 2 0 3 ASRock 880GMH-LE/USB3 Motherboard...
  • Page 204 2 0 4 2 0 4 2 0 4 2 0 4 2 0 4 ASRock 880GMH-LE/USB3 Motherboard...
  • Page 205 1 2 3 4 2 0 5 2 0 5 2 0 5 2 0 5 2 0 5 ASRock 880GMH-LE/USB3 Motherboard...
  • Page 206 2 0 6 2 0 6 2 0 6 2 0 6 2 0 6 ASRock 880GMH-LE/USB3 Motherboard...
  • Page 207 2 0 7 2 0 7 2 0 7 2 0 7 2 0 7 ASRock 880GMH-LE/USB3 Motherboard...
  • Page 208 2 0 8 2 0 8 2 0 8 2 0 8 2 0 8 ASRock 880GMH-LE/USB3 Motherboard...

Table of Contents