Related Manuals for Gazelle GM4518
Summary of Contents for Gazelle GM4518
- Page 1 GM4518 Polisher Pictures of battery packs with different configurations vary in the illustration.
- Page 2 Read through carefully and understand these instructions before use.
-
Page 3: General Power Tool Safety Warnings
the influence of drugs, alcohol or medication. A General power tool safety warnings moment of inattention while operating power tools WARNING Read all safety warnings, may result in serious personal injury. b) Use personal protective equipment. Always instructions, illustrations and specifications provided with this power tool. - Page 4 for misalignment or binding of moving parts, cannot be adequately guarded or controlled. breakage of parts and any other condition g) The dimensions of the accessory mounting that may affect the power tool’s operation. must fit the dimensions of the mounting If damaged, have the power tool repaired hardware of the power tool.
- Page 5 coolants. Using water or other liquid coolants may UK power plug warnings: Your product is fitted with an BS 1363-1 approved result in electrocution or shock. electric plug with internal fuse approved to BS 1362. Further safety instructions for all operations If the plug is not suitable for your socket, it should be Kickback and related warnings: removed and an appropriate plug should be fitted in its...
-
Page 6: Technical Data
This product is suitable for polishing wood surface,painted wooden furniture surface,synthetic resin and hard rubber products,painted metal surface polishing. The performance and specifications of this product are shown in the table below: Model GM4518 Rated Power Input 1400 Rated Speed... -
Page 7: Maintenance And Care
Number Speed（…/min） 1090 1800 2580 3160 3800 CAUTION: The constant speed and power controller can be MAINTENANCE AND CARE turned only as far as 1 and back to 6. Do not force it past 1 or 6, or the speed adjusting function may CAUTION: no longer work. - Page 8 1.Limit Mark • Replace the Carbon Brushes Use a screwdriver to remove the brush holder caps, take out the worn carbon brushes, insert the new ones and secure the brush holder caps. 1.Brush Holder 2.Screwdriver • Maintenance of the Motor The motor unit winding is the very “heart”...
- Page 9 EXPLANATION OF GENERAL VIEW Abrasive Disc Baffle Plate Cross Recessed Pan Head Tapping Gear Housing Cover Screw ST5×63 Cross Recessed Small Pan Head Stator Screw M5×14(With Spring Washer) Paper Washer Insulation Washer Big Dust Washer 27×20 Bearing 608-2RS-DC03 Ball Bearing 6202DD-DC01 Bearing Rubber Sleeve (22×25×10.5) Output Bearing Retainer Capacitor 0.22μF (Short)
Need help?
Do you have a question about the GM4518 and is the answer not in the manual?
Questions and answers