Lenovo U2 User Manual

Lenovo U2 User Manual

Smart lock

Advertisement

Quick Links

USER MANUAL

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the U2 and is the answer not in the manual?

Questions and answers

Brandon
April 18, 2025

I am changing my router and how do I change the network connection that currently connected to my lock

1 comments:
Mr. Anderson
May 9, 2025

To change the network connection for a Lenovo U2 lock after changing your router, follow these steps:

1. Remove the device from the app:
- Press and hold to select the lock in the app.
- Delete the lock from the app.

2. On the lock:
- Enter Admin Mode by pressing * and #.
- Enter your master PIN.
- Go to "Network Connecting" or "Add Device."

3. Re-pair the lock:
- Select the lock model (U2).
- Choose your 2.4GHz Wi-Fi network.
- Enter your new Wi-Fi password.
- The lock will pair with the new network.

This answer is automatically generated

Chan siew meng
March 12, 2025

How to use U2 lock induction card

1 comments:
Mr. Anderson
March 12, 2025

To use the Lenovo U2 lock induction card, place the induction card in the proximity area of the lock. After successful verification, the lock will unlock. Ensure that the induction card is added in admin mode for the first time.

This answer is automatically generated

th lim
July 30, 2025

where is the key hole location for the Lenovo U2 lock if i need to use the physical key to open my gate and door

Subscribe to Our Youtube Channel

Summary of Contents for Lenovo U2

  • Page 1 USER MANUAL...
  • Page 2: Admin Settings

    1 : ADMIN SETTINGS If this product fails to verify the key 5 times during use, the system will lock it for 90 seconds, and enter the correct key again after 90 seconds to use it normally. Please pay attention to the battery level reminder before going out, and replace the battery in time when the power is insufficient.
  • Page 3: User Setting

    2 : USER SETTING 1. Password Management 2. Fingerprint Management Follow the prompts to select the ones you want 3. Card Management to add Password, Fingerprint, Card, or Face 4. Face Management 5. Wireless Pairing 6. System Setting Press the [*] [#] key, please use the administrator password for verification. After entering the main menu, the user can press the corresponding number key to select the operation according to the menu number.
  • Page 4: Delete User

    2.5 : DELETE USER Press the [*] [#] key, please use the admin istrator password for verification. After entering the main menu, the user can press the corresponding number key to select the operation according to the menu number. 2.5.1 : SINGLE DELETION 1.
  • Page 5: Network Setting

    Select a device type. On the page that appears, enter the password for connecting to the 2.4 GHz Wi-Fi network. The location permission must be granted to automatically find Wi-Fi networks. Lenovo smart lock X5 Select "Add Device" >"Camera & Lock" > Lock (Wi-Fi).
  • Page 6: Restore Factory

    5 : RESTORE FACTORY When prompted to restore factory settings, confirm that please press the [#] key, and press the [*] key to cancel. Press This Key to Restore Factory CAUTION Defaults After the factory Settings are restored, all user data will be cleared.
  • Page 7 FACE RECOGNITION Make the recorded face close to the lock. When the lock end recognizes the face information, and face is verified successfully, it will give a voice prompt “locked”. FINGERPRINT UNLOCK Press the fingerprint area to open the lock. After it is verified, the lock can be opened (please add the user’s fingerprint in the admin mode for the first time) PASSCODE UNLOCK...
  • Page 8 www.lenovosmartlock.com...

This manual is also suitable for:

X5 max

Table of Contents

Save PDF