Adjusting The Feet; Electrical Connection - Beko DFS26020X User Manual

Installation
C
Drainpipe must be connected
to the sewage system and it
should not be connected to any
surface water.

Adjusting the feet

If the door of the product cannot be closed
properly or if the product swings when you
push it slightly, then you need to adjust
the feet of the product. Adjust the feet of
the product as illustrated in the installation
manual supplied with the product.
A
Diswashers door must be
aligned properly otherwise hot
steam can escape! Danger of
serious burns, other injury or
may damage furniture.
Dishwasher / User's Manual

Electrical connection

Connect the product to a grounded outlet
protected by a fuse complying with the
values in the "Technical specifications"
table. Our company shall not be liable for
any damages that will arise when the
product is used without grounding in
accordance with the local regulations.
Connection must comply with national
•
regulations.
Power cable plug must be within easy
•
reach after installation.
B
Unplug the product after the
washing programme is over.
The voltage and allowed fuse or
•
breaker protection are specified in
the "Technical specifications" section.
If the current value of the fuse or
breaker in the house is less than 16
Amps, have a qualified electrician
install a 16 Amp fuse.
The specified voltage must be equal to
•
your mains voltage.
Do not make connections via
•
extension cables or multi-plugs.
B
Damaged power cables must
be replaced by the Authorised
Service Agent.
B
If your dishwasher is equipped
with internal illumination, lamp
should only be replaced by the
Authorised Service Agent in
case of failures that may occur
on the lamp.
B
If the product has a failure, it
should not be operated unless
it is repaired by the Authorised
Service Agent! There is the risk
of electric shock!
11 / 43 EN