Oxygenics BodySpa RV Easy Installation Instructions

B S
ody
Easy InstallatIon
InstructIons
stEp 1 stEp 2
Remove your Remove any
existing shower remnants of old
head. To remove, plumber's tape and
turn the existing flush out shower
shower head in a pipe for 5 to 10
counterclockwise seconds.
direction.
stEp 4 stEp 5
In a clockwise Attach wide end of
direction, screw the SmartPause
grooved end of valve to base of the
hose to the taped handheld shower
portion of the and hand tighten.
shower arm. Hand Attach smooth
tighten only. end of the hose to
opposite end of the
SmartPause
attEntIon:
smooth End of hosE attachEs
to showEr hEad
RV
pa
stEp 3
Wrap plumber's
tape clockwise 3
or 4 turns around
threaded end of
shower arm.
stEp 6
Attach double
stick tape provided
™
to back of holder
and press firmly to
clean, dry shower
wall. Place your new
handheld shower
head into holder.
valve.
™
usInG thE
smartpausE ValVE
Located at the base of the BodySpa® wand, the
SmartPause™ valve allows you to pause your shower
while you lather up.
To pause the shower spray: Gently push the button
on the SmartPause™ valve from left to right to
pause the shower's flow. To resume flow, simply
push button back to the left.
stop!
nEEd hElp?
plEasE do not rEturn thIs
product to thE storE.
If you need installation assistance, replacement
parts or have questions regarding our warranty
please contact customer service at
1.866.440.9257
1.775.420.5600
or
Support is also available via email at
support@oxygenics.com
Be sure to visit our website at
www.oxygenics.com
Business Hours: Monday-Friday
7:00 am to 4:30pm PST