heatapp! S2 Manual

repeater S2
0450000594-1913
EN Installation instructions
Safety instructions
• The device is not suitable for children and must not be
used as a toy.
• Store packaging material safely away from children or
dispose of it.
• Do not dismantle the device; it does not contain any
user-serviceable parts. If defects occur, please contact
your installer.
Product discription
heatapp! repeaterS2 is a USB powered Z-Wave
repeater and part of the heatapp! system. It is used to
enhance the network range of the Z-Wave system by
repeating the data from other devices in the network
wirelessly to the destination device. Wireless
transmission takes place via the Z-Wave protocol.
The device is wall-mounted. A detailed description of
the heatapp! system is available in the operating
instructions at www.heatapp.de
Command Classes
Node Frame Info
Security Command Supported Report Frame
Function
Button
1x short key press
Trippel short press within 1 second
Press key for 3..8 seconds
Press and hold key for 10 seconds
This product can be operated in any Z-Wave network
with other Z-Wave certified devices from other
manufacturers. All non-battery operated nodes within
the network will act as repeaters regardless of vendor
to increase reliability of the network.
Mounting installation
• Select a suitable installation location.
• Ensure that no pipes or cables are laid in the wall
beneath the mounting location that could be damaged
by the installation.
1. Separate the upper casing (1) from the lower
casing (2).
2. Screw the lower casing (2) in place on the wall (4) in
the desired mounting position through the fastening
holes (3).
Included Non-Secure
COMMAND_CLASS_ZWAVEPLUS_INFO
COMMAND_CLASS_ASSOCIATION
COMMAND_CLASS_ASSOCIATION_GRP_INFO
COMMAND_CLASS_TRANSPORT_SERVICE_V2
COMMAND_CLASS_VERSION
COMMAND_CLASS_MANUFACTURER_SPECIFIC
COMMAND_CLASS_DEVICE_RESET_LOCALLY
COMMAND_CLASS_NOTIFICATION_V8
COMMAND_CLASS_POWERLEVEL
COMMAND_CLASS_SECURITY
COMMAND_CLASS_SECURITY_2
COMMAND_CLASS_SUPERVISION
KEY:
LED:
KEY:
LED:
KEY:
LED:
KEY:
LED:
Technical Specification
Operating distance: up to 300 feet (100 meters) outdoors.
Type of installation Wall mounting
Wireless system Z-Wave
Power supply USB powered
Ambient temperature -10 ... +50 °C
Storage temperature -25 ... +60 °C
Dimensions 79 x 79 x 18 mm
Colour Traffic white RAL 9016
Weight Approx. 50 g
Device and Command Classes
Library

SDK: 6.81.3

Basic Device Class: BASIC_TYPE_ROUTING_SLAVE

Generic Device Class:
GENERIC_TYPE_REPEATER_SLAVE

Specific Device Class:
SPECIFIC_TYPE_REPEATER_SLAVE
Included Secure
COMMAND_CLASS_ZWAVEPLUS_INFO
COMMAND_CLASS_SUPERVISION
COMMAND_CLASS_TRANSPORT_SERVICE_V2
COMMAND_CLASS_SECURITY
COMMAND_CLASS_SECURITY_2
COMMAND_CLASS_VERSION
COMMAND_CLASS_ASSOCIATION
COMMAND_CLASS_ASSOCIATION_GRP_INFO
COMMAND_CLASS_MANUFACTURER_SPECIFIC
COMMAND_CLASS_DEVICE_RESET_LOCALLY
COMMAND_CLASS_NOTIFICATION_V8
COMMAND_CLASS_POWERLEVEL
Send notification Message with Type 9 (system) and Event
5 (heartbeat) and after 45 seconds a Z-Wave Network
Update will be performed
Include or exclude device
Include or exclude device
Reset device locally to reset the device to factory defaults.
Please use this procedure only when the network primary
controller is missing or otherwise inoperable.