Freewing BlueBridge is a dedicated adapter device with a built-in Bluetooth communication module, including Blue Bridge Lite Edition and Blue Bridge Pro Edition. As a relay device, Freewing Blue Bridge includes two of the most common interfaces. Through it, the connected devices can interact with the Freewing Flight Assistant APP for data exchange, achieving the purpose of setting, modifying device parameters, and setting online upgrades.
Page 3
Full charged - Depleted battery Connection Diagram Blue Bridge data cable connected to gyro Connect the servo to the Blue Bridge C port Data exchange / Power supply through Type-C Directly perform parameter settings Freewing Blue Bridge - 2 -...
Page 4
Operating instructions 1. Refer to the previous content to correctly connect the device to the Blue Bridge. 2. Blue Bridge supply power (this step can be skipped for Blue Bridge Pro Edition), Blue Bridge green indicator light flashes. Green light Flashing...
The Freewing Blue Bridge remains powered on all the time. After setting up device A, when setting up another device B, the APP only needs to open the device B management interface and use it directly. In any case, if the power supply of the Freewing Blue Bridge is interrupted during use, Bluetooth will immediately disconnect.
Page 6
By using these parameters, the AIL/Roll aircraft can maintain a more accurate horizontal attitude as much as possible ELE/Pitch - 2 - Freewing Flight Assistant V1.0.0...
Page 7
Freewing Guard Gyro Setting Interface - Command bar Send The parameters displayed on the interface will be directly written Read to the currently connected device and replace the original data When the reading is successful, The current data in the device will be there will be a green background displayed on the interface;...
Page 8
Smart Servo Setting Interface Bluetooth connection status Freewing Smart Servo Disconnect Connecting Servo rotation direction Rotation Direction Switch the servo rotation direction Neutral position adjustment through this command Adjust the stop position of the servo arm Neutral-Position Adjustment (← Left, Right→)...
Need help?
Do you have a question about the Blue Bridge and is the answer not in the manual?
Questions and answers