Installation Guide 1. Install the clip in a suitable area. 2. Attach the clamp to the edge of your desk and then firmly secure the screw. Tabletop thickness should not exceed 6.35 mm. 3. Connect the supplied adapter to the desk lamp. 4.
Touch Control Panel Click: Tun on/off the main light in the middle. Ambient light sensor: The sensor receives ambient light and converts it into an electrical signal. Click: 5 levels of color temperature adjustment (3000K-3500K-4000K-5000K-6500K) Long press: Stepless tempering (3000-6500K) Click: 5 brightness levels adjustment (20%-40%-60%- 80%-100%) Long press: Stepless dimming (20%-100%)
Attention 1. Keep the lamp away from heat sources. 2. Do not immerse appliance, cords or plugs in water or other liquid to avoid electric shock. 3. Do not look at the LEDs directly to avoid damage to eyes. 4. Please do not remove the power plug with wet hands as it may cause electrical shock.
Need help?
Do you have a question about the LumixDesk-04 and is the answer not in the manual?
Questions and answers