FUME EXTRACTOR WFE 2800 Carefully read these instructions before use and keep them safely after reading for later reference. INSTRUCTION MANUAL SAFETY PRECAUTIONS WARRANTY WARNING UNDERSTANDING YOUR FUME EXTRACTOR DIRECTION OF USE FILTER CLEANING CLEANING & MAINTENANCE TROUBLESHOOTING COMMONLY ASKED QUESTIONS...
Page 4
The WFE 2800 from MAXVAC has been manufactured with the greatest care, and we hope that you will be happy with the WFE 2800 you have just purchased. However, if it does not fully comply with your expectations, please contact your supplier.
Page 5
Please record the model and serial number below, for easy reference, in case of loss or theft. These numbers are located on the back panel of your air purification unit. Space is also provided for other relevant information. Model number Serial Number Date of Purchase Purchased From WFE 2800 MAX-VAC.COM...
• Children or persons suffering disability, perceptual disturbance or mental retardation should use the air purifier under supervision and assistance of the Safety Director. • Do not allow a child to operate the fume extractor without authorization. WFE 2800 MAX-VAC.COM...
WARRANTY The MAXVAC WFE 2800 is supplied with a 12 month warranty on material and manufacturing defects. Keep (or a copy of) your receipt in order to be able to submit the correct purchase date.
200mm MORE THAN FROM THE SOURCE OF EMMISSIONS 1. Ensure the unit is switched on. PLEASE NOTE The capture distance may differ from the commissioning value. Your Annual LEV Thorough examination and test will highlight any change. WFE 2800 MAX-VAC.COM...
The life of the filters will vary greatly depending upon the usage of the filter. As a guideline the filters should be replaced after 2000 hours approx. continuous use. WFE 2800 MAX-VAC.COM...
Clean the lens & upper/lower sensor ports of the air quality sensor with slightly damp cotton swab, and then carefully dry it. Reinstall the protective cover. WFE 2800 MAX-VAC.COM...
Contact the MAXVAC technical team. Unusal sounds Clean/replace filters. Insufficient air supply Stop the machine. Contact the MAXVAC technical team. Smoke formation or loud noise in the Contact the MAXVAC technical team. High vibration speed Check the turning direction of the fan Power intake overvoltage Stop the machine.
If you require replacement filters, contact your local dealer. Q. Where should I place the Fume Extractor for optimum effectiveness? A. The WFE 2800 should be placed as close as possible to any known source, or where the highest intensity of airborne particulates are located.
EU - DECLARATION OF CONFORMITY Complies with machinery directive 89/392 plus annexes. Welding Fume Extractor Models: WFE 2800 MAXVAC, hereby declares the above stated models comply with the following or relevant part thereof: Machinery Directive: 2006/42/EC (Part 98/37/EC) Noise Emission Directive:...
Need help?
Do you have a question about the WFE 2800 and is the answer not in the manual?
Questions and answers