Summary of Contents for La Crosse Technology 617-1485B
Page 1
User Manual of Product 1: La Crosse Technology 617-1485B Atomic Color Alarm Clock with USB Charging Port User Manual of Product 2: La Crosse Technology Atomic Analog Wall Clock, 10", Silver...
Model: 617-1485 Instruction Manual DC: 041916 ATOMIC ALARM CLOCK USB Charge Port AC Power Jack HX09-0501500-AU 617-1485 www.lacrossetechnology.com/support Page | 1...
Get Started 1: Insert 5.0 volt AC adapter into the wall then into the back of the alarm clock. 2: Insert 2 new AAA Alkaline batteries (not included) into the alarm clock. Observe the correct polarity. Restart: If there is no indoor temperature data after 60 seconds, unplug the AC adapter and remove batteries from the alarm clock, press any button 20 times.
Set Time & Calendar 1. Hold the SET button to enter time set mode. 2. Press the + or - buttons to adjust values. 3. Press the SET button to confirm adjustments and move to the next item. Setting order: 1.
Set Time Alarm Setting the alarm and activating the alarm are separate actions. 1. Hold the ALARM button for 5 seconds to enter alarm time set mode. 2. The letters “AL” will replace the seconds and the alarm hour will flash. 3.
Page 6
Temperature/Humidity Trend Indicators The temperature (2°F / 1°C) and humidity (1% RH) trend indicators update every 30 minutes or less. • Temperature has risen in the past 3 hours. • Humidity has risen in the past 3 hours. • Temperature has not changed in the past 3 hours. •...
Moon Phase The moon phase is based on the Gregorian calendar and the year, month and date set (manually or by the WWVB signal). Most Internet moon phase calculations are based on the lunar calendar. Waxing First Waxing Full Waning Last Waning Moon...
If the alarm clock is not working properly, change the batteries and/or check the A/C cord connection. Warranty and Support Information La Crosse Technology, Ltd. provides a 1-year limited time warranty (from date of purchase) on this product relating to manufacturing defects in materials & workmanship.
FCC STATEMENT This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy, and if not installed and used in accordance with the instructions, may cause harmful interference to radio communications.
Page 10
Model: WT-3102S Instruction Manual DC: 033115 10” Atomic Wall Clock Get Started Step 1: Slide the switch to select a time zone. Step 2: Insert 1 fresh AA, Alkaline battery according to the polarity marked on the case. Step 3: For the best reception, please place clock on a wall that faces Ft.
Position Clock For the best reception, please place clock on a wall that faces Ft. Collins, Colorado. The antenna is best positioned for signal reception when there is only one wall or window between the clock and outside. Choose a location 6 feet or more from electronics such as cordless phones, wireless gaming systems, televisions, microwaves, routers, baby monitors, etc., which can prevent...
Troubleshooting The wonderful advantage of owning a radio-controlled clock is that it is virtually trouble free. If the clock receives a clear time signal, it will set itself perfectly. If it does not receive a time signal, consider the following: ...
Page 13
Q. How long will the battery last? A. A good AA alkaline battery will last over 24 months. Q: Can I wire a control timing circuit to the La Crosse Technology® atomic clock? A: The clock cannot work on a timing circuit. Opening the clock voids the warranty.
Need help?
Do you have a question about the 617-1485B and is the answer not in the manual?
Questions and answers