GCX VHRC Installation Manual

The purpose of this guide is to describe configuration, assembly of the cart and demonstrate key functions.
Warnings
Configurations specified by GCX Corp. have been tip tested to verify stability of complete cart. Configurations differing from
approved GCX specifications should be tip tested to ensure safe operation and prevent any stability/tip hazards. Contact GCX
for further information.
Do not position the cart or mounted equipment above a patient. Please consider carefully the mounted equipment and proximity
of cart to other equipment, hospital personnel and the patient.
When moving the cart, fold any extended mounts with equipment inward to prevent collisions with other equipment, walls,
doorways, hospital personnel and the patient.
Periodically inspect components and fasteners for looseness. Tighten as required for optimal operation and safety.
Parts Reference
The following parts and hardware are included in this cart kit.
Item # Description
1 Column assembly
2 Base assembly
3 5/16-18 Flange Hex Bolts
4 1/2"/13mm Socket Wrench
5 Rear Column Covers (height dependent)
Tools Required
1/2"/13mm Socket Wrench (provided with kit)
Installation Guide
Fixed Height Rolling Cart (RC) cart assembly
Qty
1
1
4
1
2 or 3
DU-RST-0008-01 Rev B 10/24/14 GCX Corp. Page 1 of 3