Do you have a question about the 816SD and is the answer not in the manual?
Questions and answers
Summary of Contents for AFF 816SD
Page 1
MODEL NO.: 816SD 4-Ton Hydraulic Body/Frame Repair Kit — Super Duty Owner’s Manual WARNING: IMPORTANT: READ THESE INSTRUCTIONS AND ALL WARNINGS PRIOR TO USING THIS EQUIPMENT. UNDERSTAND ALL OPERATING PROCEDURES, SAFETY WARNINGS AND MAINTENANCE REQUIREMENTS. FAILURE TO DO SO COULD CAUSE AN ACCIDENT RESULTING IN SERIOUS OR FATAL INJURY AND/OR PERSONAL PROPERTY DAMAGE.
IMPORTANT FOR YOUR SAFETY, PLEASE READ THESE INSTRUCTIONS CAREFULLY. THE OWNER AND OPERATOR SHALL HAVE AN UNDERSTANDING OF THIS PRODUCT AND SAFE OPERATING PROCEEDURES PRIOR TO INITIAL USE. USE THE PRODUCT CORRECTLY AND WITH CARE FOR THE PURPOSE FOR WHICH IT IS INTENDED. FAILURE TO DO SO MAY CAUSE DAMAGE TO PROPERTY AND/OR SERIOUS PERSONAL INJURY.
TROUBLESHOOTING PROBLEM CAUSE REMEDY Ram will not lift load 1. Release valve not tightly closed 1. Firmly close release valve 2. Overload condition 2. Remove the overload condition 3. Air trapped in system 3. Purge away air from system (see 4.6 for instructions) Ram will not maintain load 1.
Page 5
PARTS LIST: 10-TON SUPER DUTY HYDRAULIC BODY/FRAME REPAIR KIT — PARTS BREAKDOWN — Prod. No. 816SD affjaxx.com...
Page 6
PARTS LIST: 10-TON SUPER DUTY HYDRAULIC BODY/FRAME REPAIR KIT — PARTS BREAKDOWN — Prod. No. 816SD PUMP SPREADER affjaxx.com...
Page 7
PARTS LIST: 10-TON SUPER DUTY HYDRAULIC BODY/FRAME REPAIR KIT — PARTS BREAKDOWN — Prod. No. 816SD PART REF. PART REF. PART REF. KIT DESCRIPTION KIT DESCRIPTION KIT DESCRIPTION NUMBER NUMBER NUMBER 816SD-01 Pump 816SD-10 Connect Pin 816SD-P29 Release Valve 816SD-02...
PRODUCTS ARE FREE FROM DEFECTS IN WORKMANSHIP AND MATERIALS. SureWerx USA will repair or replace its SureWerx USA “AFF” branded products which fail to give satisfactory service due to defective workmanship or materials, based upon the terms and conditions of the following described warranty plans attributed to that specific product.
Need help?
Do you have a question about the 816SD and is the answer not in the manual?
Questions and answers