Summary of Contents for TJ IB-801
- Page 1 IB-801 Multi-Motion Baby Swing Instruction Manual 一、packing list 1. base assembly 2. Cradle components 3. Cradle main beam (aluminum tube) 4. Power cord 5. remote control...
- Page 2 6. Accessories （1）Bolts, nuts, wrenches （2）Toy bar, toy spindles and toys (3 pieces) 二、product assembly （一）, Preparation before product assembly Before assembling the product, be sure to remove the 4 fixing screws on the bottom of the base assembly!
- Page 3 （二）product assembly 1. Remove one end of the cradle main beam connector 2. Loosen the main beam compression knob 3. Insert the main beam of the cradle into the main beam mounting hole of the base assembly (note that the insertion should be from the rear of the mounting hole to the front ) 4.
- Page 4 6. Pay attention to the distinction between the front and the rear of the base and cradle. 7. Fix the front of the cradle assembly to the front of the cradle main beam and tighten the bolts and nuts...
- Page 5 8. Fix the rear of the cradle assembly to the rear of the cradle main beam and tighten the bolts and nuts 9. Effect picture after product installation...
- Page 6 10. Loosen the main beam compression knob, adjust the cradle assembly to the required angle, and then tighten the main beam compression knob (Cradle elevation angle from 10 ° ~ 40 ° adjustable) （三）Assembly of toy components 1. Assemble the toy bar and toy shaft together 2.
- Page 7 三、Instructions for use (1) Use the 12VDC/2A power cord. （二）Product function description This product has the following functions 1. There are 5 parent-inspired motions. 2. There are 5 speeds. 3. 5 built-in sounds 4. There are 5 levels of volume adjustment. 5.
- Page 8 1. On/off key. After the product is powered on, the switch key turns red; After pressing the power button, the button turns blue, and the product performs rocking motion according to the motion mode 1 and motion speed 1, but the music is not turned on. During the use of the product, press the on/off button, which will turn red.
- Page 9 5. Sports mode 4. The motion trajectory of the cradle is in the shape of the high position from left to right, the right end from high to low, the low position from right to left, and the left end from low to high. Press this button, the blue light of this button will light up, and the cradle will rock in motion mode 4.
- Page 10 14. power button 15 ~ 19.Sports mode button 20.Movement speed adjustment key 21 ~ 24. Play music selection button 25.Volume adjustment key （五）Bluetooth music connection Turn on the Bluetooth switch on the mobile phone and search for "Baby Pretty " . After the mobile phone is paired with this product, this product can play the music on the mobile phone.
- Page 11 This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter. Manufacturer: TJ (Fujian) Industrial Co。 ，Ltd Address: No.518,Yintai Road,Changtai District,ZhangZhou City 363000,Fujian Province,China...
Need help?
Do you have a question about the IB-801 and is the answer not in the manual?
Questions and answers