Engine Oil Specification And Grade (10W/40 And 10W/50) - Triumph Tiger 900 GT 2024 Owner's Handbook Manual

Engine Oil Specification and Grade
(10W/40 and 10W/50)
Triumph's high
injected engines are designed to use
fully or semi synthetic 10W/40 or
10W/50 motorcycle engine oil which
meets specification API SN (or higher)
and JASO MA2. Triumph Performance
fully synthetic
recommended.
NOTICE
The engine oil grade specified must be
used.
Using the incorrect engine oil grade
may result in engine damage.
Refer to the chart below for the correct
oil viscosity (10W/40 or 10W/50) to be
used in your riding area.
Ambient Temperature (°C)
-20 -10 0 10
SAE 10W/50
SAE 10W/40
-4 14 32 50
Ambient Temperature (°F)
Oil Viscosity Temperature Range
MAINTENANCE AND ADJUSTMENT
performance fuel
engine oil is
20 30 40 (°C)
68 86 104 (°F)
Do not add any chemical additives to
the engine oil. The engine oil also
lubricates the clutch and any additives
could cause the clutch to slip.
Do not use mineral, vegetable, non-
detergent oil, castor based oils or any oil
not conforming
specification. The use of these oils may
cause instant, severe engine damage.
Make sure that no foreign matter enters
the crankcase during an engine oil
change or top up.
to the required
135