Steelman 60956 Operator's Manual

20v cordless 1/2" drive brushless drill

Hide thumbs

Table Of Contents

Table of Contents

Quick Links

Download this manual

60956

20V CORDLESS 1/2" DRIVE BRUSHLESS DRILL

OPERATOR'S MANUAL

CAUTION:

To reduce the risk of injury, user must read and understand this

operator's manual. Save these instructions for future reference.

Table of Contents

Need help?

Do you have a question about the 60956 and is the answer not in the manual?

Questions and answers

Summary of Contents for Steelman 60956

Page 1 60956 20V CORDLESS 1/2" DRIVE BRUSHLESS DRILL OPERATOR’S MANUAL CAUTION: To reduce the risk of injury, user must read and understand this operator’s manual. Save these instructions for future reference.
Page 2: Table Of Contents
TABLE OF CONTENTS SAFETY AND WARNINGS �� 2-3 POWER TOOL USE AND CARE �� 3-4 BATTERY TOOL USE AND CARE �� 4 SERVICE �� 4 DRILL SAFETY WARNINGS �� 4-5 SCREWDRIVER SAFETY WARNING �� 5 SPECIAL SAFETY INSTRUCTION FOR BATTERY PACKET AND CHARGER �� 5-6 SPECIFICATIONS ��...
Page 3: Power Tool Use And Care
Avoid body contact with earthed or grounded surfaces, such as pipes, radiators, ranges and refrigerators. There is an increased risk of electric shock if your body is earthed or grounded. Do not expose power tools to rain or wet conditions. Water entering a power tool will increase the risk of electric shock.
Page 4: Battery Tool Use And Care
Store idle power tools out of the reach of children and do not allow persons unfamiliar with the power tool or these instructions to operate the power tool. Power tools are dangerous in the hands of untrained users. Maintain power tools and accessories. Check for misalignment or binding of moving parts, breakage of parts and any other condition that may affect the power tool’s operation.
Page 5: Screwdriver Safety Warning
Hold power tool by insulated gripping surfaces, when performing an operation where the cutting accessory may contact hidden wiring. Cutting accessory contacting a “live” wire may make the exposed metal parts of the power tool “live” and could give the operator an electric shock.
Page 6: Specifications
The following hazards may arise in connection with the tool’s construction and design: Damage to lungs if an effective dust mask is not worn. Damage to hearing if effective hearing protection is not worn. Health defects resulting from vibration emission if the power tool is being used over longer period of time or not adequately managed and properly maintained.
Page 7: Charging
CHARGING Put the battery pack in the charger stand. Make sure it is placed correctly ( + and - ). Plug in the socket-outlet (230-240V~). When the green indicator light lights up and the red indicator light is blinking, this means the battery pack is now being charged.
Page 8: Maintenance
ON / OFF SWITCH To switch on the tool, press the on/off switch. To switch off the tool, press the on/off switch. LEFT / RIGHT SWITCH Shown on the left / right switch. Set left / right switch to Change direction of rotation only when the machine is not in operation. CAUTION: Operating the machine with a low speed for a long time will increase the risk that the motor will be overheated.
Page 9: Warranty
WARRANTY 1 YEAR LIMITED WARRANTY This STEELMAN product is backed by a 1 Year Limited Warranty. ® This warranty covers manufacturer defects and workmanship. The warranty excludes misuse or abuse and normal wear and tear. Exclusion is not allowed in some states and may not apply. This warranty gives you specific legal rights, and you may have other rights, which vary from state to state.
Page 10: Notes
NOTES...
Page 11 NOTES...
Page 12 07.27.2021 JS PRODUCTS • 6445 MONTESSOURI STREET • LAS VEGAS, NV 89113 CUSTOMER SERVICE: 1-855-706-1550 • WWW�STEELMANTOOLS�COM...