Aquacleanse (Oven Cleaning System) - NEFF B1422B0GB How To Connect

AquaCleanse
d
The oven cleaning function featured in your oven is
intended to help you keep your oven neat and tidy.
An amount of cleaning solution is vaporised
automatically. The combined effects of heat and
steam soften the soil deposits on the oven wall
enamel and facilitate their removal.
Caution:
Never pour cold water into the oven while it is still
hot.
The cleaning system can only be activated when
the oven has cooled down completely
(room temperature).
Use normal water only, and no distilled water.
Activate oven cleaning:
1.
Remove the baking sheet and the universal
pan from the oven. The wire shelf may
remain in the oven.
2.
Pour approx. 400 ml of water mixed with a little
dish washing liquid detergent into the floor pan of
the oven cavity.
In the case of heavy soil build-up, you may wish
to allow the cleaning solution to soak in for a
while before you activate the cleaning function.
3.
Close the oven door.
4.
Turn the function selector to the
The oven cleaning and the oven temperature
control lamp are illuminated. After the initial
heating time (approx. 4 minutes) the oven
temperature control lamp extinguishes.
After a further 17 minutes the program cycle is
completed. A buzzer sounds.
Switching the oven OFF:
Turn the function selector to the 0 position.
The oven cleaning control lamp extinguishes.
d
position.
27