Advertisement
Quick Links
REVOLUTION 26 HANDLE ASSEMBLY PROCEDURE
Cable Guide
Lower Handle
1. Open the box and remove all the packaging, but leave the mower on the pallet. Fit the lower handle
using the screws and nuts provided. Fit the upper handle to the lower handle with the levers pointing
upwards, as shown above. Make sure to fit the cable guides. Cable "A" on the Right and "C" on the Left.
2. Using the screws supplied, fasten the reel clutch lever "A" and cable thunb wheel "B" on the Outer
Right hand side of the handle as shown.
3. Hook the Z-bend "E" through the bail arm as shown
www.reelrollers.com
032354.A.0
Advertisement
Summary of Contents for Revolution 26
- Page 1 REVOLUTION 26 HANDLE ASSEMBLY PROCEDURE Cable Guide Lower Handle 1. Open the box and remove all the packaging, but leave the mower on the pallet. Fit the lower handle using the screws and nuts provided. Fit the upper handle to the lower handle with the levers pointing upwards, as shown above.
- Page 2 4. Using the screws supplied, losen the tape and fasten the throttle lever “C” and cable thunb wheel “D” on the Outer Left hand side of the handle as shown. 5. Fill the engine with oil as instructed in Oil Fill the engine manual.
Need help?
Do you have a question about the 26 and is the answer not in the manual?
Questions and answers