Echanfit CTM5001N2 User Manual page 15

3.5. SPEED▲/▼: Adjust the speed. Press the button to adjust the speed when running, or
adjust the data when stop.
3.6. SPEED（1,3,5,7)：Adjust the speed quickly.
3.7. Left handrail button: Start/Stop adjustment button.
Right handrail button: Speed adjustment button.
Notice: When any button is pressed, it will be accompanied by a prompt tone. When the
button is adjusted for parameter overrun, it will be accompanied by a long tone prompt.
There is no beep when the button is pressed Invalid.
4. MAIN FUNCTION
Open the power switch, the screen window will light up, the machine will enter into standby state.
START-UP QUICKLY (MANUAL):
4.1.
Put safety key, press 'START' button, the treadmill will run at the lowest speed in 3 seconds,
press SPEED▲/▼ to adjust the speed. Press the 'STOP' button or take out the safety key
directly to stop the treadmill.
COUNT DOWN MODE:
4.2.
Press the 'MODE' button, you can choose time countdown mode, distance count down mode,
calories countdown mode, and the screen window will show the default data and glitter. At the
same time, press SPEED▲/▼ to set the data. Press 'START' button, the machine will run at
the lowest speed, you can press SPEED▲/▼ to change the speed. When it counts down to 0,
the machine will stop smoothly. Certainly, you can press 'STOP' button or take out the safety
key from the computer to stop the machine.
INNER INSTALL PROGRAM:
4.3.
Press 'PROG' button to choose the inner install program from P1 P15. When set the program,
the time window will show default data and glitter, press SPEED button to set the running time.
Each program has been divided into 20 section, Each exercise time=the setting time/20. Press
'START', the machine will run at the first section speed. When the section is over, it will enter
into next section automatically, the speed will change as next section data. When finish one
program, the machine will stop smoothly. During the running, you can change the speed by
the SPEED▲/▼. When the program enter next section will come back to the current speed.
And you can press 'STOP' or take out the safety key to stop the machine whenever.
- 13 -