GEORGE KOVACS P1665-66A-L Installation Instruction

TYPE-C
WARNING
 Risk of shock, do not plug in the unit before assembly is complete.
 Do not exceed the maximum wattage rating.
(Ne pas depasser la puissance nominale maximale!)
 Before turning on, please follow the instruction manual step by step.
INSTALLATION
ON/OFF
1. Carefully unpack your new lamp and place all parts on a smooth, flat surface to
protect the finish until ready to install.
2. Vertically connect the tube to the lamp shade, rotating clockwise until lock tightly.
3. Vertically connect the tube to the base, rotating clockwise until lock tightly.
4. Installation is complete. Please follow below instructions before turning on the lamp.
CHARGING INSTRUCTIONS
This is a rechargeable lamp, there are 2pcs 1800mA lithium batteries inside the shade.
Please use a Max 5V 3A charger to charge the product for the first time.
1. Charging: Please use standard Max 5V 3A charger. Insert the Type C charging cable
directly into the charging interface at the bottom of the lamp shade.
2. Note: When charging, the power indicator on the lamp shade lights up in red and
turns off when fully charged.
3. Remove the charger and Type C charging cable once fully charged.
Mode|#P1665-66A-L
Mode|#P1665-695-L