Download Print this page

Bake Max BMGG024 Operation Manual

Floor model refrigerated display case

Advertisement

Quick Links

BakeMax BMGG024
Floor Model Refrigerated
Display Case
Operations Manual
Questions? Contact Us:
Toll Free: 1-800-565-2253
Email:
Info@BakeMax.com
www.BakeMax.com

Advertisement

loading
Need help?

Need help?

Do you have a question about the BMGG024 and is the answer not in the manual?

Questions and answers

Summary of Contents for Bake Max BMGG024

  • Page 1 BakeMax BMGG024 Floor Model Refrigerated Display Case Operations Manual Questions? Contact Us: Toll Free: 1-800-565-2253 Email: Info@BakeMax.com www.BakeMax.com...
  • Page 2 Note: The murmur of water is heard when the refrigerator is operating. This is a normal phenomenon as the coolant is circulating in the system. Condensation might be found on the outside of the refrigerator. This is caused by high humidity and is normal.
  • Page 3 BakeMax Model # BMGG024 Coolant and injection quantity(g) R290(148) General Rated input power(W) 1380 Power running of electrical heating element(W) Max Ambient temp./RH <80°F (27°C) / 70% Refrigeration temperature 35°- 50°F (2°-10°C) Rated voltage(V) 110-120V Rated Frequency(Hz) 60Hz Rated Current(A)
  • Page 4 1. Cabinet Cleaning: The cabinet should be cleaned once a week with the power supply disconnected. Wipe the inside and all surfaces of the refrigerator with a soft cloth with neutral and non-corrosive soap or detergent. Do not submerge or wash this unit directly with a water supply/faucet. 2.
  • Page 6 To Unlock the Controller Parameters Press the Down Arrow for 10 seconds or until the display shows “ON” If it shows “OFF” , leave it for 10 seconds, then press the Down Arrow again for 10 seconds, then it will show “ON” To Check Evaporator Temperature Press the UP Arrow for 10 seconds, and the evaporator temperature will be displayed.
  • Page 7 Compressor Start Delay Time Press “SET” until display flashes “E4”. Press the “UP” or “Down” arrow to adjust setting to 0. Offset On Room Temp. Press “SET” until display flashes “E5”. Press the “UP” or “Down” arrow to adjust setting to 0. Offset On Evap.
  • Page 8: Troubleshooting

    Troubleshooting Troubles Causes Solutions Strange noise under Fan blade broken. Power off and fix the blade. the bottom shelf 1.Unit off. Non-refrigerating de 1.Power on. 2.Melting process spite normal operati 2.Stop melting. 3.Refrigerant leaking 3.Patch the leak and refill refrigerant 4.Unit failure.
  • Page 10: Warranty And Service

    Warranty & Service BakeMax provides a 1-Year Limited Parts and Labor warranty on most items, there are select items which carry a Limited 2-Year Warranty. Extended Warranty is available on some products. Please contact us for details. The Warranty is not transferable and is limited to original installation of equipment sold by BakeMax for the original user.