Alyseum Q-VCA II User Manual

Alyseum Q-VCA II User Manual

Advertisement

ALYSEUM - Q-VCA II - User manual
1
Introduction
The Q-VCA II module is a versatile, dynamic and high quality quad VCA.
After 6 years, feedback from Q-VCA users has led to an improved MK II
version.
The classic features are:
100% Analog path.
Toggle switch to select exponentially or linearly curve control.
All inputs, control & outputs are DC-coupled and beyond audio.
Inputs cascading to multiple VCA .
Toggle switch to select gain 0,5X or 1X of the MIX Out.
In addition to VCA control by CV, 4 unique modes are available:
1. Manually via the potentiometer.
2. By a programmable MIDI controller (CC).
3. Associated with MATRIX II - Requires crossover between VCA and
potentiometer values to avoid level jumps.
4. Associated with MATRIX II - Turn the potentiometer and the VCA
is instantly updated.
The use of the Q-VCA II as an extension to the MATRIX II allows
the latter to :
Freely add 4 mixable sources to each of its 15 inputs.
Freely add 4 mixable destinations to each of its 16 outputs.
And for each MATRIX II memory to store the VCA levels.
Q-VCA II User's manual © - Revision 3.0 - Page 1

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the Q-VCA II and is the answer not in the manual?

Questions and answers

Summary of Contents for Alyseum Q-VCA II

  • Page 1 4. Associated with MATRIX II - Turn the potentiometer and the VCA is instantly updated. The use of the Q-VCA II as an extension to the MATRIX II allows the latter to : ●...
  • Page 2: Package Content

    D/A 1 CV IN 1 OUT MIX MIDI PGM D/A 2 MODE PGM CV IN 2 D/A 3 CV IN 3 MIDI IN D/A 4 CV IN 4 Q-VCA II Q-VCA II User’s manual © - Revision 3.0 - Page 2...
  • Page 3: Installation

    ● The MATRIX II MIDI Out must be connected to the MIDI Input of the Q-VCA II module. You can easily chain several modules, please connect the MIDI THRU to the MIDI IN of the next module, and more as necessary.
  • Page 4: How To Use

    At each time a VCA receive a valid MIDI CH+CC, blink twice time the corresponding LOCK LED. NB : The 4 potentiometers are not operant in this mode. Programming MIDI command Q-VCA II User’s manual © - Revision 3.0 - Page 4...
  • Page 5 At each time you turn the potentiometer, the corresponding green LED LOCK blink one time. MIDI SYS-EX These commands are generated by the MATRIX II, of course, if you will control the Q-VCA II by any software, welcome. Please note that no support or assistance will be provided!
  • Page 6: Warranty And Repair

    Warranty and repair ALYSEUM warrants to you, the original purchaser, that each of its products will be free from defects in materials and workmanship for a period of two years following the date of purchase.

Table of Contents