PROGRAMMAZIONE
Passo 1: cancellazione della memoria
1. Premere il tasto A e B simultaneamente nché il LED lampeggia 3 volte
2. Rilasciare il tasto B (mantenendo A premuto) e premere lentamente il tasto B 3 volte:
il LED lampeggia
3. Rilasciare il tasto A. La cancellazione è stata e ettuata.
Passo 2: copia del codice dal telecomando originale
1. Posizionare il telecomando il più vicino possibile al telecomando originale
2. Premere e tenere premuto il tasto che si vuole copiare sul telecomando originale, quindi
premere e tenere premuto il tasto del MK-RC-N8GB sul quale si vuole memorizzare il
codice da copiare nché il LED non lampeggia due volte, seguito da un lampeggio veloce
e continuo, ad indicare che la copia è avvenuta con successo.
3. Rilasciare entrambi i pulsanti, la copia è terminata.
Copiare i rimanenti tasti con la stessa procedura
Passo 3: recupero del codice
( Da utilizzare solo se inavvertitamente viene cancellato il codice copiato )
Premere e tenere premuti i tasti C e D per 2 secondi: il LED lampeggerà, ad indicare che tutti i
pulsanti sono ritornati all'ultimo codice che era stato copiato.
PROGRAMMING
Step 1: Clear the history code from duplicator
1. Press button A and B continuously until LED ash 3 times
2. Release button B (Keep pressing button A), and press button B Slowly for 3 times,
LED ash
3. Release button "A", nish code clearance.
Step 2: Copy code from original transmitter
1. Put duplicator aside of original transmitter, as close as possible.
2. Press and hold the key you want to copy on the original remote control, then press and
hold the MK-RC-N8GB key on which you want to store the code to copy until the LED ashes
twice, followed by a quick ash and continuous, indicating that the copy was successful.
3. Release both buttons, nish code copy, copy other button in same way.
Step 3: recovery the code
( Only to be used if it is inadvertently deleted the code that you copied )
Press and hold button C & D for 2 seconds, then LED will ash, which indicates all button return
back to the latest copy codes.
Made in China
Melchioni S.p.A Via Colletta, 37 - 20135 Milano | clienti-ready@melchioni.com | www.melchioni-ready.com
MK-RC-N8GB
Radiocomando universale a frequenza fissa a 433.92 MHz 4Ch
Universal Radio Remote Control 4 channel FIX frequency 433 Mhz
1
1 2
3 4
2
< 10mm
1 2
3
3 4
Cod. 559540135
1 2
3 4
1 2
3 4
Need help?
Do you have a question about the MKC MK-RC-N8GB and is the answer not in the manual?
Questions and answers