mpd LARA Assembly Instructions

LARA DINING CHAIR
ASSEMBLY INSTRUCTIONS
585mm
875mm
465mm
IMPORTANT
PLEASE READ BEFORE YOU CONTINUE FURTHER
PLEASE KEEP THE ORIGINAL PACKAGING UNTIL THE ITEM IS FULLY
ASSEMBLED AND IN PLACE. IN THE UNLIKELY EVENT THAT YOU NEED TO
RETURN YOUR PRODUCT , IT MUST BE RETURNED IN ITS ORIGINAL
PACKAGING TO AVOID FURTHER DAMAGE. FAILURE TO THESE
PROCEDURES, NO RETURNS WILL BE ACCEPTED.
THE PRODUCT YOU HAVE PURCHASED WILL GIVE YOU MANY YEARS OF
SERVICE IF YOU FOLLOW THE GUIDELINES FOR ITS SAFE ASSEMBLY AND
PERIODIC MAINTENANCE AND CLEANING.
ASSEMBLE ON A SOFT CLEAN SURFACE.
DO NOT USE ANY TOOLS OTHER THAN THOSE SHOWN.
ANY SPANNERS OR ALLEN KEYS REQUIRED ARE INCLUDED WITH THE
FITTINGS KIT.
DO NOT FOR ANY REASON USE A POWER TOOL TO ASSEMBLE THIS
PRODUCT .ITS USE WILL INVALIDATE ANY CLAIM YOU MAY HAVE AND
COULD MAKE THIS PRODUCT UNSAFE.
DEPENDING ON THE AMOUNT OF USE THIS PRODUCT RECEIVES IT MAY BE
NECESSARY TO TIGHTEN UP THE FIXINGS FROM TIME TO TIME.
THIS IS COMPLETELY NORMAL FOR ANY FLAT PACK FURNITURE.
DO NOT OVERTIGHTEN FIXINGS.
FOR CLEANING YOU MAY USE A DAMP CLOTH (NOT WET).
DO NOT USE POLISH, DETERGENT OR CHEMICAL CLEANERS.
THIS PRODUCT MAY STAIN OR MARK IF ALLOWED TO COME INTO
CONTACT WITH WET OR DAMP OBJECTS AS MATERIALS USED HAVE NOT
BEEN TREATED WITH SCOTCH GUARD.
THE SURFACE OF THIS ITEM IS NOT HEAT RESISTANT.ALWAYS USE A
PLACE MAT UNDER HOT OR COLD ITEMS TO PREVENT MARKING.