Omron S8M Product Manual page 7

Mounting
Standard Mounting
Correct
Note: 1. Improper mounting will interfere with heat dissipation and may occasionally result in deterioration or damage of internal parts.
Do not use any mounting method other than the standard one.
2. Take adequate measures to ensure proper heat dissipation to increase the long-term reliability of the S8M.
3. Install the S8M so that the air flow circulates around it, because the S8M is designed to radiate heat by means of natural air flow.
Functions
Functions
Alarm
Abnormal voltage tripping TRP output: OFF
(normally ON)
Abnormal current tripping TRP output: OFF
(normally ON)
Overvoltage alarm ALM output: OFF
(normally ON)
Undervoltage alarm ALM output: OFF
(normally ON)
Overcurrent alarm ALM output: OFF
(normally ON)
Run time alarm ALM output: OFF
(normally ON)
Over-temperature output TMP output: OFF
(normally ON)
Face-up Mounting
Incorrect
Alarm output Output status
All branch outputs cut off.
Relevant branch output cut
off.
ON
ON
ON
ON
ON
Alarm display
A10
A11
A20
A21
A22
A23
A30
Digital Multicircuit Protector
S8M
7