Page 1
A: Die-cast aluminum Note: 1. A Plug Cord (R87F-PC) is available as an option for models with terminals. 2. These tables show only how to read product markings. They do not indicate which products are available. Refer to product ratings when ordering.
R87F-FL@ Refer to page 42. R87F-FL@S Note: The products approved by standard organizations satisfied the following tests. UL approval number: UL507 (UL519, UL547) CSA approval number: C22.2 (No. 0, No. 113) VDE approval number: DIN/EN60950 (VDE0805), EN60950, IEC950 TÜV approval number: VDE0700 Teil 1, VDE0700 Teil 234, EN60355-1, IEC335-1...
Page 5
Note: Other applications include discharging air in outdoor devices (small-size outdoor devices), and cooling internal components of machine tools and switchboards in industrial devices. R87F-A@A16H-WR M-19 ntlp...
Flow rate Q (m /min) tion IEC60529) and Material Safety Law, UL/ Note: For details on measurement condi- CSA, and IEC60335 tions, refer to “Flow Rate and Static Pressure” on page 45. Dimensions 39.8 119.5 17.8 Ground Screw Section Four M4 screws (See note.)
Page 16
R87F-A@A83L Flow rate: Q (m /min) Flow rate: Q (m /min) Note: For details on measurement conditions, refer to “Flow Rate and Static Pressure” on page 45. Dimensions Direction of flow Screw hole for grounding Side with label (front) M4 screw: 0.7 pitch...
Page 24
■ Flow Rate and Static Pressure Characteristics (Reference Value) R87T-A@A85H Flow rate: Q (m /min) Note: For details on measurement conditions, refer to “Flow Rate and Static Pressure” on page 45. Dimensions Screw hole for grounding Direction of flow Screw hole for grounding...
Page 25
AC Axial-flow Fans with Lead Wires (80 x 80 x t25 mm) R87T-A@A83 Specifications ■ Ratings Note: * indicates a nominal value. Model Rated Permitted Frequency Rated current Rated input Rated rotational Maximum flow Max. static Noise (dB)* voltage voltage...
Page 26
Options Name Model Page number Finger Guard R87F-FG80 Refer to page 41. Filter R87F-FL80 Refer to page 42. R87T-A@A83 M-40 AC Axial-flow Fans with Lead Wires (80 x 80 x t25 mm)
Page 27
R87F-A@A1 Series R87F-FG120 92 92 R87F-FG90 R87T-A@A1 Series 80 80 R87F-FG80 92 92 R87F-A@A9 Series R87F-FG90 80 80 R87F-A@A8 Series R87F-FG80 R87T-A@A8 Series Note: Finger Guards reduce the flow rate by approximately 2% to 5%. Common Information M-41 AC Axial-flow Fans...
R87T-A@A1 Series 120 120 R87F-FL120 92 92 R87F-A@A9 Series R87F-FL90 80 80 R87F-A@A8 Series R87F-FL80 R87T-A@A8 Series Note: Filters reduce the flow rate by approximately 20% to 40%. Ensure that there is no clogging. Common Information M-42 AC Axial-flow Fans...
Application Examples 1. Control Panels 4. Medical Equipment 2. Computer 5. Soldering Fume Extractor 3. Measurement Devices 6. Automatic Vending Machines and Display Cases Common Information M-43 AC Axial-flow Fans...
Fan will be adversely affected. Leakage Flux Distribution Curves The leakage flux distribution curves for inlet and outlet sides of the R87T Axial-flow Fans are shown below as examples. Inlet Outlet...
Page 31
When installing the Fan, keep the clearance at the outlet side as A Fan installed in equipment operates near the point where the Fan small as possible. (If there is a large clearance at the outlet side, it characteristic curve crosses the system impedance curve.
OMRON conducts testing according to JIS (Japan Industrial Stan- or from previous data. dard) C 9603 because of the small size and low noise levels of the P = KQ Fans and because of their similarity in shape to extractor fans. This...
Page 33
Q2, for rately for details on rated values. example. This result indicates that the system impedance was so the Fan one size larger is necessary to produce the flow rate Q Flow Rate: Q (m /min.) The volume of air discharged by the Fan in a unit of time.
CONTRACT, WARRANTY, NEGLIGENCE, OR STRICT LIABILITY. In no event shall the responsibility of OMRON for any act exceed the individual price of the product on which liability is asserted. IN NO EVENT SHALL OMRON BE RESPONSIBLE FOR WARRANTY, REPAIR, OR OTHER CLAIMS REGARDING THE...