Summary of Contents for ISYGLT SUN-PRO-02
- Page 1 Technical Data / Instruction Manual SUN-PRO-02 Article no. 80085101 SUN Processor Seebacher GmbH www.seebacher.de Phone: +49 (0) 80 41 / 77 77 6 Marktstrasse 57, 83646 Bad Tölz info@seebacher.de Fax: +49 (0) 80 41 / 77 77 2...
-
Page 2: Notes On Documentation
These instructions are intended for qualified personnel who are 1. Notes on documentation familiar with the assembly, installation and operation of the ISYGLT system. It is essential that you read these operating instructions through before commissioning and keep them accessible for 1.1. -
Page 3: Safety Instructions
DIN rail according to EN 60715 in corresponding standard housings. Extreme environmental conditions impair the function Assembly and installation of the ISYGLT module may only be car- of the product. ried out by a qualified electrician. Other activities in connection with Protect module from shocks •... -
Page 4: Warranty
These are limited to the intended use of the module and refer EU on waste electrical and electronic equipment at the local collec- to the repair or replacement of the ISYGLT module. Please send the tion points for waste electrical and electronic equipment! device with an attached error description to our company address given below. -
Page 5: Product Description
The blind module is used to light sensor. A new feature is that the SUN-PRO-02 now has an inte- control two separate blind motors and has extensive parameterisation grated, optionally activatable system clock and can be parameterised options. -
Page 6: 11. Wiring Diagram
53.00 59.00 SUN-PRO-02 80085101 ISYGLT 11. Wiring diagram +24V BUS-A BUS-B ISYGLT SUN-PRO-02 Art.-Nr.: 80085101 Misprints and technical changes reserved. Seebacher GmbH www.seebacher.de Phone: +49 (0) 80 41 / 77 77 6 Marktstrasse 57, 83646 Bad Tölz info@seebacher.de Fax: +49 (0) 80 41 / 77 77 2...
Need help?
Do you have a question about the SUN-PRO-02 and is the answer not in the manual?
Questions and answers