UNILITE MTB-10000 Manual

PRODUCT FEATURES
■ Ultra bright 10000 lumen 6500K SMD LEDs
■ Multiple colour temperatures - CCT: 2700k / 3500k / 4500k / 5500k
/ 6500k
■ Takes up to 20V 6.0Ah batteries from Milwaukee, De Walt, Makita &
Metabo - 4 adapters included
■ Secure battery compartment cover (note: larger 5.5Ah-6.0Ah
batteries may need to be used without cover)
■ Super tough heavy duty nylon & polycarbonate construction
■ Milky diffuser lens for even light dispersion
■ Easy carry rubber grip handle
■ Concealed fold-out ultra tough steel hanging hook in base
■ 2 screw holes in base for attaching magnets
■ IP65 Dust & water resistant
■ Heavy duty IK08 Shock proof
■ Smart Memory Switch - remember last mode used
■ 5 x Battery level & charging indicators
■ Unilite 14.8V 5.2Ah battery available to purchase separately
BATTERY Not included, bare tool
WEIGHT 3650g
DIMENSIONS W 278 x H 256 x D 333mm
ADVICE & IMPORTANT INFORMATION!
■ LEDs will become hot when switched on; do not touch and never
place face down on any surface – risk of fire! Even once the lamp has
been switched off, DO NOT place face down as the LED/Lens will stay
hot/warm for a while.
■ Do not look directly at LEDs.
■ Do not operate in direct sunlight or extreme temperature conditions
(below -10˚C or above 40˚C).
■ Do not use the device if there is any visible damage.
■ Children under 12 years of age should only use the product under
adult supervision.
■ Do not open, disassemble or attempt to modify the product; this will
void the warranty and can be dangerous. Improper use or modification
is not covered under the warranty.
■ Take care not to let the lens come into contact with hard/sharp
objects, damage/scratches to the lenses will affect light output.
■ This product is water resistant to IPX5 – DO NOT SUBMERGE. If
the product has been subjected to excessive moisture/water the
warranty may be void.
■ This product has a 1 year standard warranty (or extended to 2
years once registered online at WWW.UNILITE.CO.UK/WARRANTY)
against manufacturing faults and defects, commencing on the date
you received your item. It does not cover normal wear and tear,
modifications, accidental damage or poor maintenance. Unilite
warranties do not cover battery leaks or the use of incorrect batteries,
power leads and cables that can cause damage.
■ Do not dispose of this device in normal household waste. It must be
disposed of via an authorised electrical appliance disposal centre or
at your local waste disposal unit.
■ Please recycle packaging responsibly.
■ Keep these instructions for future reference or for subsequent
possessors.
www.unilite.co.uk
English
ANSI FL1 Standard
HIGH
MEDIUM
LOW
ECO
NOTE: these runtimes are based on using the Unilite 14.8V 5.2Ah
battery. Runtimes with other batteries will vary.
BATTERY INSTALLATION
Always
correct adaptor for the brand of
power tool battery you are using.
Never force the wrong adaptor
onto another brand of battery.
This will cause damage and voids
any warranties.
The
cover
waterproofing,
some larger 5.5Ah-6Ah batteries,
the cover may not fit, so please
take note the waterproofing level
will not be as high.
OPERATING THE LAMP
Press the On/Off circle switch on the front of the unit, keep pressing to
get the desired light output from the 4 dim settings as shown by the
bottom row of green lights.
Press the rectangle switch to change the colour temperatures, keep
pressing to get the desired light colour as shown by the bottom row
of 5 green lights below.
Smart Memory - If left ON in any MODE for 5+ seconds, next press will
turn OFF. Next press ON will return to the last MODE used.
GENERAL BATTERY ADVICE
■ New rechargeable batteries will reach full performance after a few
complete charging and discharging cycles.
■ To keep the rechargeable batteries in optimum condition, they
should be recharged every 3-6 months, especially if not being used
for a long period of time.
■ Always fully charge batteries before storage.
■ Always protect lithium batteries from heat, intense sunlight, fire,
water and moisture – danger of explosion!
■ If a battery is damaged, fluids can leak out. AVOID contact as this
can lead to skin irritation and/or burns. If skin contact occurs, rinse
thoroughly with water. If irritation persists, seek medical advice.
Seek immediate medical assistance if lithium battery fluid comes into
contact with the eyes.
10000
ensure you use the
battery compartment
provides IP65 dust &
however with
Battery level indicators
On/Off Switch
CCT Switch
Battery
Compartment Cover
MTB-10000
89 M 1 H
Lumen
5000
42 M 2 H
Lumen
2500
31 M 4 H
Lumen
1200
19 M 10 H
Lumen