Download Print this page

Nireeka BIKE STAND Assembly Manual

Download this manual

B I K E

S T A N D

ASSEMBLY MANUAL

O R I G I N A L

I N S T R U C T I O N S

Need help?

Do you have a question about the BIKE STAND and is the answer not in the manual?

Page 1 B I K E S T A N D ASSEMBLY MANUAL O R I G I N A L I N S T R U C T I O N S...
Page 2: Packing List
PACKING LIST Bracket Transverse Tube Bracket Inner Six Angle Wheel Frame Screw 7/16 Schaft Solitary Gasket...
Page 3 BIKE STAND ASSEMBLY Follow the instructions to assemble it correctly: 1. Separate a transverse tube, two brackets 2. Join the two brackets to the transversal and two screws. tube, inserting the two screws to join the parts. 3. Tighten the screw using the hexagonal 4.
Page 4 7. Add 1 solitaty gasket to each end of the third bracket. 8. Add the third bracket to the brackets 9. Fit the screw from the bottom up, attached to the transverse tube. joining the third bracket to the brackets attached to the transverse tube.
Page 5 15. Tighten the nut screws using the 16.The bike stand should look like this open-end wrench on one side and the after assembly. Make sure all the screws hexagonal wrench on the other.
Page 6 SUPPORT support@nireeka.com www.nireeka.com/help-center www.nireeka.com...