Page 2
Limited Lifetime Warranty. All other implied warranties are excluded. Liability for incidental or consequential damages are excluded to the extent exclusion is permitted by law. Ardisam, Inc. does not assume and does not authorize any other person to assume for us, any liability in connection with the sale of our products. Ardisam, Inc. retains the right to change models, specifications, and price without notice.
Page 3
ASSEMBLY INSTRUCTIONS READ AND UNDERSTAND THE FOLLOWING WARNINGS BEFORE ASSEMBLY STOP MODEL NT201/NT202 WARNING TOTAL WEIGHT LIMIT - 350 LB Pull up a bow, backpack, or firearm or other equipment only after being secure in the treestand TREE DIAMETER RANGE - 8" TO 20" and a firearm must be pulled up with it unloaded, chamber open, and muzzle down.
Page 4
WARNING INSPECTION AND MAINTENANCE When using a climbing/lineman’s belt to ascend the BEFORE EACH USE PERFORM THE FOLLOWING: tree, the full body harness shall be attached to the tree before stepping down onto the treestand. • Inspect all webbing, rope, cord, and strap assemblies for Sectional ladders and steps shall be spaced on the wear or damage.
Page 5
USE INSTRUCTIONS NESTING INSTRUCTIONS The Nested Lite Rails™ are designed to stack and attach to each other for easy and quiet transport. ® 1. With no cam strap attached, hold a rail in each hand and insert the front of one bottom step into the bottom clip on the rail in front of it (SEE FIGURE 1).
Page 6
SET-UP AND USE INSTRUCTIONS CRITICAL STRAP ATTACHMENT INSTRUCTIONS At ground level, prior to attaching to tree and leaving the ground, it is critical you familiarize yourself with the Nested Lite Rail™ and how the strap attaches ® to the rail. Improper strap attachment to the rail and/ or improper rail attachment to the tree may lead to serious injury or death due to sudden release of an incorrectly attached strap/rail!
Page 7
SET-UP AND USE INSTRUCTIONS TREE ATTACHMENT INSTRUCTIONS 1. Standing on the ground with one Nested Lite ® Rail™ against tree, attach the sewn loop of the long side of the strap to either the left or right side strap mount by sliding sewn loop completely over the mount with the strap on the outside of the rail (SEE FIGURE 7).
Page 8
45422 SERVICING OR REASSEMBLING THESE BOLTS RIVERS EDGE TREESTANDS, A DIVISION OF ARDISAM, INC. ® 1730 Industrial Avenue, PO Box 666, Cumberland, WI 54829 Phone: 800-345-6007 | Fax: 715-822-2124 All weights, specifications and features are approximate and are subject to change without notice. Due to continuous product improvement, product images may not be exact.
This manual is also suitable for:
Nested treestand systems lite rail nt202Nested treestand systems lite rail nt501
Need help?
Do you have a question about the NESTED TREESTAND SYSTEMS LITE RAIL NT201 and is the answer not in the manual?
Questions and answers