TPD -PHONE Series Installation, Operation & Maintenance Manual page 2

INSTALLATION CONTINUED
The protected device/equipment should also have AC protection because it is still vulnerable to transients, whether generated externally or internally to
NOTE 2:
the building. Omitting AC protection poses a continued threat of failure and lockup at the communication interface.
Incoming
Utility Power
Meter
Box
2
Incoming
Cable Line
3
Incoming
Phone Line
Need additional assistance?
Call Technical Support at 1-717-436-2856 or visit
www.TransientProtectionDesign.com
Breaker
Panel
Power
Outlet
1
Ground
Wire
Transient Protection Design
#1 TPX-1S240-F
#2 TPD-CABLE
#3 TPD-PHONE-RJ
#4 TPD-CAT6 or TPD-CAT6-POE
#5 TPD-GRD
Data
Network
Cable
Distribution
Phone
Distribution
Ground Wires
© 2023 Transient Protection Design. All Rights Reserved. This document is the property of Transient Protection Design.
4
Ethernet Port or
IP Camera
Exiting Home
2
Cable Distribution
Exiting Home
3
Phone Extension
Exiting Home
5