Contents ■ ■ Receiving news announcements....19 Thank you for buying this Pioneer product. Registration and connec- iPhone or smartphone Receiving alarm broadcasts ......19 Please read through these instructions so you ■ tion of Bluetooth applications .....28 will know how to operate your model properly.
Page 3
Contents ■ Adjusting loudness .........37 Connection .......45 Using the subwoofer output......37 Adjusting the cutoff frequency value ....37 Precautions ............45 Switching the rear speaker output ....37 Precautions before connecting the system ..45 Boosting the bass ..........37 Before installing this product ......45 Selecting the listening position .......37 To prevent damage ........45 Adjusting the speaker output levels finely ..37...
WARRANTY ARE THE ONLY WARRANTIES MADE BY PIONEER above while driving, they will become disabled until you stop nearest authorized Pioneer Service Station. Do not use this OR ANY OF ITS LICENSORS, AS APPLICABLE. PIONEER the vehicle in a safe place, and (1) apply the parking brake, (2)
To watch video image ● devices while using this product. The Pioneer CarStereo-Pass is for use only in Germany. on this display, stop the vehicle in a safe place and apply the parking brake. Please keep the brake pedal pushed down before...
Precaution ● The remote control may not function properly in direct Use and care of the remote Resetting the microprocessor sunlight. control Important CAUTION ● Do not store the remote control in high temperatures or Pressing the RESET button resets settings and recorded Installing the battery direct sunlight.
Basic operation p Connection via a USB hub is not possible. Inserting/ejecting/connecting Pauses or resumes playback. p A USB cable is required for connection. For audio: Press and hold to perform fast media 1 Pull out the plug from the USB port of the USB reverse or fast forward.
Page 9
Basic operation 6 Touch the item you want to set. Information on the connections and functions for each device on page 17 7 Touch The top menu screen appears. p Once the speaker mode is set, the setting cannot be changed unless this product is restored to the default settings.
Basic operation How to use the screens Application menu screen Time and date setting screen 2014 Setting menu screen Abcdefg Abcdefg Abcdefg Abcdefg Abcdefg System Month/Date d / m / y m / d / y y / m / d Time Format 12hour 24hour...
Basic operation The top menu screen of this manual is the screen when using the AppRadioMode. The items displayed iPod 6/10 on the screen may vary depending on the connecting device or mode. When you connect an iPhone via Abcdefghi Bluetooth wireless technology or a smartphone via 2 Touch and hold a source icon, and drag the icon USB cable, “Smartphone Setup”...
Basic operation Registration and connection of Bluetooth device If you touch the key, the rest are scrolled for display. 3 Appears when items cannot be displayed on a single page. Drag the scrubber bar or the list to view any hidden items. XL5750BT X2750BT X5750BT...
Registration and connection of Bluetooth device 3 Touch [Clear]. Switching visibility The confirmation screen appears. This function sets whether or not to make this product visible to Updating Bluetooth software the other device. 1 Display the “Bluetooth” screen. This function is used to update this product with the latest ...
Hands-free phoning 5 Touch to end the call. XL5750BT X2750BT CAUTION X5750BT For your safety, avoid talking on the phone as much as Dialing from the history possible while driving. Bluetooth telephone To use this function you need to connect your cellular phone to connected indicator this product via Bluetooth in advance.
Hands-free phoning ● Touch to reject the call. Cellular phone operations vary depending on the type of cel- Setting the private mode lular phone. Refer to the instruction manual that came with 2 Touch to end the call. your cellular phone for detailed instructions. During a conversation, you can switch to private mode (talk ●...
Setup for iPod / iPhone or smartphone When using an iPod / iPhone or a smartphone with this product, For details about MirrorLink device compatibility with this iPod compatibility configure the settings of this product according to the device to product, refer to the information on our website.
Setup for iPod / iPhone or smartphone Information on the connections and functions for each device The settings and cables required for connecting each device, and the available sources are as follows. iPod / iPhone with a 30-pin connector Device connection method When connecting via Bluetooth When connecting via CD-IU201V (sold separately) (AVH-X5750BT) (AVH-XL5750BT) (AVH-X2750BT)
Radio Starting procedure Displaying the “Radio settings” Displays the preset channel list. Select an item on the list ("1" to "6") screen 1 Display the “AV source selection” screen. to switch to the preset channel. 1 Press Selects the FM1, FM2, FM3 2 Touch , and then or AM band.
Radio TV tuner Setting the alternative fre- Receiving news announcements Hides the tuner control keys. To display again the keys, touch quency search The news can be received from the last selected frequency, inter- anywhere on the screen. rupting the other sources. When the tuner cannot get a good reception, tunes to another 1 Display the “Radio settings”...
TV tuner Disc Broadcast frequencies stored during this step may replace those Track number indicator Hides the touch panel keys. saved previously. Audio source screen 1 To display again the keys, 1 Touch [Menu]. touch anywhere on the screen. 6/10 2 Touch [Channel Search].
Disc Video source screen 2 Video source screen 2 p By pressing , you can also skip files/chapters forward or backward. 6/10 6/10 p By pressing and holding , you can also perform fast reverse or fast forward. p If a Video-CD with PBC On is being played, appears.
Disc Compressed audio files p The way to display the menu differs depending on the disc. Searching for the part you If you touch , you can operate the DVD menu want to play directly. Playback screen 1 (Example: USB) p For DVD-Videos, you can select [Title], [Chapter] or [10Key].
Compressed audio files Selecting files from the file Displays the link search screen. Plays les in random order. This function is available for the USB storage device name list only. : Does not play les in random order. Selecting a song in the album (link search) on You can find files or folders to play back using the file name or page 23 : Plays all les within the repeat...
Compressed video files Compressed audio files (Example: Disc) Hides the touch panel keys. To display again the keys, 6/10 ● touch anywhere on the screen. Video: Switches the media file type to video. (Example: Disc) ● CD-DA: Switches the media file type to CD (audio data (CD-DA)). 6/10 ●...
Still image files Compressed video files Hides the touch panel keys. 6/10 To display again the keys, touch anywhere on the screen. Starting procedure Rotates the displayed picture 90° clockwise. Compressed audio files on page 22 Abcdefghi Abcdefghi Selects the previous Selecting files from the file Trimming or next folder.
Still image files iPod Plugging and unplugging a USB storage device on page 8 3 Touch “Yes” to overwrite the image. Audio source screen 1 p Playback is performed in order of folder numbers. Folders p Each one image can be saved for AV screen or Home iPod are skipped if they contain no playable files.
iPod iPod audio and/or video sources are enabled if either of the Video source screen Plays les in random order. cables is connected. iPod iPhone with 30-pin connector on page 48 6/10 : Plays randomly songs or Via Bluetooth wireless technology videos within the selected list.
Abcdefg Abcdefg p You can play playlists created with the MusicSphere applica- ● Pioneer is not liable for any issues that may arise from tion. The application is available on our website. incorrect or flawed app-based content. ● The content and functionality of the supported Using this product’s iPod func-...
iPhone or smartphone applications 5 Touch [OK]. Setup for iPod / iPhone or smartphone on page 16 Displaying the image of your The AppRadio Mode screen (Application menu screen) appears. 1 Unlock your MirrorLink device. application For smartphone users 2 Connect your MirrorLink device to this product You can set an image of an application for your device, which via the separately sold USB interface cable for...
iPhone or Bluetooth audio player smartphone XL5750BT X2750BT p By pressing and hold the button, you can also X5750BT applications perform fast reverse or fast forward. p Before using the Bluetooth audio player, register and con- Playback screen 1 nect the device to this product. Bluetooth ...
AUX source AV input You can display the video image output by the device connected Setting the video signal 6/10 to this product. External video component and the display on page 48 When you connect this product to an AUX equipment, select the suitable video signal setting.
AV input MIXTRAX Displaying the “MIXTRAX Deactivates the MIXTRAX mode. Settings” screen (Example: iPod) iPod 1 Press 6/10 2 Touch [Video Signal Setting]. 2 Touch , and then [AV Source Settings]. 3 Touch [AV]. Abcdefghi 3 Touch [MIXTRAX Settings]. 4 Touch the item you want to set. Abcdefghi The following items are available: Setting the playback portion...
● Random3: or an authorized Pioneer Service Station. The flash pattern changes randomly according to the low 1 Display the “System” setting screen. p When you start to set, all the default key settings is automati- pass mode.
System settings 4 Press Selecting the system language CAUTION The adjustment results are saved. Pioneer recommends the use of a camera which outputs ● If the embedded language and the selected language setting 5 Press once again. mirror reversed images, otherwise the screen image may are not the same, text information may not display properly.
System settings 2 Touch [Dimmer Settings]. “Dimmer” can be changed the setting or the time Adjusting the picture to switch it to on or off. 3 Touch [Day/Night] to switch the following You can adjust the picture for each source and rear view camera. ...
System settings Audio adjustments p Follow the on-screen instructions to finish updating the 1 Display the “Audio” setting screen. Displaying the “Audio” setting firmware. Displaying the “Audio” setting screen on page 36 screen p This product will reset automatically after the firmware 2 Touch [Mute Level].
Audio adjustments Corrects a little the audio level difference between the music 4 Drag the graph lines to the position you want to p “All” is not available when “Network Mode” is selected as files or the sources (for the narrow dynamic range audio the speaker mode.
Audio adjustments OFF (default), Front, Front Left, Front Right, All. p If you trail a finger across the bars of multiple equalizer Using the equalizer p “All” is not available when “Network Mode” is selected as bands, the equalizer curve settings will be set to the value of the speaker mode.
Audio adjustments 1 Stop the vehicle in a quiet place, close all the 13 Store the microphone carefully in the glove Before operating the Auto EQ doors, windows and sun roof, and then turn the compartment or another safe place. function engine off.
Theme menu Selecting the background Adjusts the brightness and the level of red, display green and blue to create a favorite color. The background display can be selected from 9 different preset displays for the AV operation screen and 6 different preset 2 Touch [Illumination].
Theme menu Setting up the video player You can also change the screen for set- Setting the top-priority tings by touching [Illumination], [Theme] or languages [Background] on this screen. 3 Touch the item you want to set. You can assign the top-priority language to the top-priority sub- ●...
Setting up the video player ● Letter Box: Makes the image in the shape of a letterbox with 6 Touch any number between [1] to [8] to select Setting the angle icon display black bands on the top and bottom of the screen. the desired level.
Setting up the video player Favorite menu Displaying your DivX VOD Setting the video signal for the Registering your favorite menu items in shortcuts allows you to quickly jump to the registered menu screen by a simple touch on deregistration code rear view camera the “Favorites”...
Common operations Other functions Setting the “Sound Retriever” Restoring this product to the function default settings 6/10 The “Sound Retriever” function automatically enhances com- You can restore settings or recorded content to the default set- pressed audio and restores rich sound. tings.
● When replacing the fuse, be sure to only use a fuse of malfunction and permanent damage to the product. Pioneer does not recommend that you install this the rating prescribed on this product. ● Do not shorten any leads. If you do, the protection ●...
Connection 9 Blue/white Notice for the blue/white lead Power cord Connect to system control terminal of the power amp (max. ● 300 mA 12 V DC). When the ignition switch is turned on (ACC ON), a control a Light green signal is output through the blue/white lead.
Connection On first-time startup on page 8 You can change the RCA output of the subwoofer depending on your subwoofer system. The subwoofer output of this product is monaural. iPhone and smartphone For details on how to connect an external device using a separately sold cable, refer to the manual for the cable.
Connection 3 USB - micro USB cable (Type USB A - micro USB B) (sup- 5 Brown (R.C IN) iPhone with 30-pin connector plied with CD-MU200) 6 Power supply 4 Android or MirrorLink device 7 Power cord Connecting via the AUX input 8 Violet/white (REVERSE-GEAR SIGNAL INPUT) ...
Connection Installation 7 Red, white (R IN, L IN) than these tolerances increases the potential for errors in Precautions before installation 8 AUX input the vehicle’s location display, and might otherwise cause reduced display performance. 9 Mini-jack AV cable (CD-RM10) (sold separately) CAUTION a Yellow b Red, white...
Installation 2 If the pawl interferes with installation, you may bend it down XL5750BT XL4750DVD out of the way. 3 Dashboard or console 4 Frame In some types of vehicles, discrepancy may occur between the unit and the dashboard. If this happens, use the supplied frame to fill the gap.
The picture stops (pauses) and this product cannot be be found here, contact your dealer or the nearest authorized operated. Pioneer service facility. The reading of data is impossible during disc playback. — Stop playback once, then restart. Problems with the AV screen The picture is stretched, with an incorrect aspect ratio.
The connection between the cellular phone and this product — Select a file that can be played. your dealer or an authorized Pioneer Service Station for cannot be established now. assistance.
Page 53
Protect above action, please contact your dealer or an authorized All the files on the connected USB storage device are Error-02-6X/-9X/-DX Pioneer Service Station. embedded with DRM. iPod failure. — Replace the USB storage device. — Disconnect the cable from the iPod. Once the iPod’s main Incompatible USB menu is displayed, reconnect the iPod and reset it.
Appendix for use or handling of the disc. This is not a sign of the compatible with the general CD standard, it may not be pos- Launching the application failed. malfunction of this product. Consider it to be normal wear sible to play the CD side with this product.
Page 55
Appendix ● ● DVD-Video discs It may not be possible to play some music files from USB For materials that use a high transfer rate, the subtitles and because of file characteristics, file format, recorded applica- video may not be completely synchronized. ●...
Page 56
Appendix Sampling frequency: 16 kHz to 48 kHz (32 kHz, 44.1 kHz,48 kHz USB storage device Depending on the version of Windows Media™ Player used for emphasis) File extension: .m4a to encode WMA files, album names and other text informa- ID3 tag: ID3 tag Ver.
Bluetooth SIG, Inc. and any use of such marks by compression technology standard used with MPEG-2 and notice PIONEER CORPORATION is under license. Other trademarks MPEG-4. Several applications can be used to encode AAC files, and trade names are those of their respective owners.
US and certain other countries. ● Pioneer accepts no responsibility for data lost from an rights as protected by the Copyright Law. iPod, even if that data is lost while using this product.
DVD-RW, DVD-RDL be visible. In that case, please consult your dealer or the Continuous power output ..........22 W × 4 Region number ................3 nearest authorized Pioneer Service Station. (50 Hz to 15 kHz, 5 %THD, 4Ω LOAD, Both Channels Driven) Signal Format: Load impedance ....4 Ω (4 Ω to 8 Ω [2 Ω for 1 ch] allowable) Sampling frequency ....... 32 kHz/44.1 kHz/48 kHz/96 kHz Preout output level (max) ............
Page 60
Appendix Output level: Specifications and design are subject to possible modifica- Video ............. 1.0 Vp-p/75Ω (±0.2 V) tions without notice due to improvements. Number of channels ............2 (stereo) MP3 decoding format ......MPEG-1 & 2 Audio Layer 3 WMA decoding format ..Ver.7, 7.1, 8, 9, 10, 11, 12 (2 ch audio) (Windows Media Player) AAC decoding format ..
基本操作 如何使用畫面 應用程式菜單螢幕 時間和日期設置螢幕 2014 設置菜單螢幕 Abcdefg Abcdefg Abcdefg Abcdefg Abcdefg System Month/Date d / m / y m / d / y y / m / d Time Format 12hour 24hour 6/10 根據不同的連接方法,會顯示 「智慧電話設置」螢幕。 頂部菜單螢幕 6/10 應用程式操作螢幕 AV 操作螢幕 Source Select iPod 6/10...
連接 7 白色 有內部放大器 8 白色/黑色 9 灰色 a 灰色/黑色 重要事項 b 綠色 使用此連接時,前置揚聲器/後置揚聲器訊號(STD)或中音/高 c 綠色/黑色 音揚聲器訊號(NW)從揚聲器導線輸出。 d 紫色 e 紫色/黑色 f 重低音揚聲器(4Ω) g 使用70W (2Ω)的重低音揚聲器時,請務必將重低音揚聲器 連接至本機的紫色和紫色/黑色導線。請勿連接任何東西至 綠色和綠色/黑色導線。 h 未使用。 i 重低音揚聲器(4Ω) × 2 1 USB連接埠 1 系統遙控器 若重低音揚聲器連接本產品而非後置揚聲器,請在初次設定 2 USB纜線1.5 m 連接至藍色/白色纜線。 時變更後置輸出設定。本產品的重低音揚聲器輸出為單聲 3 iPod / iPhone的專用USB介面纜線(CD-IU52)(另售)...
Need help?
Do you have a question about the AVH-XL4750DVD and is the answer not in the manual?
Questions and answers