Performance Machine 0066-2000 Installation Instructions

ATTENTION
Statements in these instructions that are preceded by the following
words are of special significance:
This means there is the possibility of
injury to yourself or others.
This means there is the possibility of
damage to the motorcycle.
Information of particular importance
has been placed in italics.
W
ARRANTY
Performance Machine Inc. warrants to the original purchaser that
the parts of this Clutch Housing to be free of manu-facturing
defects in materials and workmanship for a period of one (1)
year from the date of purchase. In the event war-ranty service is
required,you must call Performance Machine immediately with a
description of the problem.
If it is deemed necessary for Performance Machine to make an
evaluation to determine whether the part is defective,[a return
authorization number will be given by Performance Machine].
The parts must be packaged properly so as to not cause further
damage and returned prepaid to Performance Machine with a copy
of the original invoice of purchase and a detailed letter outlining
the nature of the problem. If after the evaluation by Performance
Machine the part was found to be defective it will be repaired or
replaced at no cost to you.If we replace it,we may replace it with a
recon-ditioned one of the same design.
Performance Machine shall not be held liable for any consequential
or incidental damages resulting from the failure of a Performance
Machine part.
Performance Machine shall have no obligation if a part becomes
defective as a result of improper installation, modification or abuse.
6892 Marlin Circle, La Palma, CA 90623
Part # 0048-0801 Rev. 6-27-02
Warning
a C i t u n o
Note
C H
ONTOUR YDRAULIC
1987
This instruction sheet covers PM Clutch
Housing part #s 0066-2000, 0066-2001 + 0066-2008
Important Notice
n
Before installing a clutch housing, read through these instructions
completely;this will familiarize you with the way in which the parts
fit together and the tools needed to complete the job.
n In the course of installing this housing you will be replacing the
stock cable clutch slave with a high perfor-mance unit. Please pay
special attention to the section of the instructions dealing with the
adjusting of the clutch.
n PM products are design to use both DOT 4 and DOT 5 brake
fluid, please use the manufactures suggested brake fluid. Never
reuse brake fluid, Never mix DOT 4 and DOT 5 brake fluid,
don't use brake fluid that you are not sure is new and clean.
This installation should only be attempted by a mechanic with
a thorough understanding of and experience with motorcycle
hydraulic systems.
n
The PM Contour Clutch housing will require an appro-priate
length hydraulic line and is designed to work with the Performance
Machine Contour Master Cylinder. PM can not guarantee the
performance of this product if used with non-PM master cylinder.
These Performance Machine parts are designed for high perfor-
mance motorcycle applications and are intended for the very expe-
rienced rider only. The installation of these Performance Machine
parts may adversely affect or void your factory warranty.
Phone 714-523-3000
n
H l r a y e D v a d i
n I t s l l a t a o i n
C H
LUTCH
, 5 + 6
AND NEWER S P E E
Disclaimer
FAX 714-523-3007
n
o s i n a s e r s i g r e t d e T a r e d m a k r o t f e h H l r a y e
n I t s u r t c o i s n
O U S N I G
D B G I T W N I S
D a i v s d n o M t o r o C o m a p y n