Advertisement
Advertisement
Table of Contents
Related Manuals for BenjMech MT6
Summary of Contents for BenjMech MT6
- Page 1 MT6 Post mount PARTS LIST & INSTALLATION INSTRUCTION MANUAL 2022...
-
Page 2: Table Of Contents
TABLE OF CONTENTS SECTION 1: VISUAL BREAKDOWN ......3 SECTION 2: COMPONENTS ........4 SECTION 3: HARDWARE ......... 4 SECTION 4: INSTALLATION INSTRUCTIONS ..5,9 SECTION 5: MANUFACTURER’S WARRANTY ..9,11 IMPORTANT INFORMATION The location of the frame is critical when dealing with windy environments. A site visit by a local installer or manufacturer representative is critical in order to protect your investments. -
Page 3: Section 1: Visual Breakdown
Section 1: Visual Breakdown ... -
Page 4: Section 2: Components
Section 2: Components ITEM PART DESCRIPTION QTY. NUMBER BS001 BASE PLATE P001 POST SBCA001 STRONGBACK POST CLAMP ADDAPTOR WM004-1 TRIANGULAR CLAMP JP001 JACKPLATE WF001 WING FRAME TUBE JC001 JACK-CLAMP ASSEMBLY WM003-2 WING MOUNT WELDMONT AF004 WING FRAME (PAIR) JC002 SIDE-WIND JACK Section 3: Loose Hardware 11*A HW001... -
Page 5: Section 3: Hardware
Section 4: Installation Instructions 1. Unpack and lay out all components on the ground. Prepare the hardware with the correct wrenches and sockets needed. 2. Install the Base plate (1) on the Engineer approved base and insert 4x 5/8” Epoxy anchors, ensure base is level 5/8”... - Page 6 4. Tie a ladder around the top of the Post (2), grab a hold of the pre-assembled Strongback post adaptor (3) and climb the ladder carefully and place the adaptor on top of the Post (2). 5. Remove to top sections of the Jack-Clamp ...
- Page 7 5. Install the Wing Frames (9) to the bottom Wing mount Weldment (8). Place a long level or straight edge on top of the Wing Frames (9) to get all the components true to each other and torque to Hardware (A, B) to 42 ft-lbs. Kinetic rail can be installed at this time.
- Page 8 6. Lay out the top Wing frame (9) and Wing mount weldment (8) on the ground or a bench. Line up components with a long level or straight edge and torque Hardware (A, B) to 42 ft-lbs. Kinetic rail can be installed at this time.
- Page 9 8. Install the remaining Kinetic rails with proper Kinetic hardware and continue with the installation of the solar modules.
-
Page 10: Section 5: Manufacturer's Warranty
Section 5: Manufacturer’s Warranty Installer/User Responsibilities The installer is solely responsible for: Complying with all applicable local or national building codes, including any that may supersede this manual. Ensuring that Benjamin Mechanical Inc products and other products are appropriate for the installation and the installation environment. - Page 11 The warranty covers the replacement cost of parts to repair the product to proper working condition. Transportation and incidental costs associated with the warranty items are not reimbursable. The warranty does not include normal wear or damage resulting from misuse, abuse, improper installation, negligence, or accident, or sizing errors of the concrete base that will receive the poles or quad pods.
Need help?
Do you have a question about the MT6 and is the answer not in the manual?
Questions and answers