Subscribe to Our Youtube Channel
Related Manuals for KegLand KL28370
Summary of Contents for KegLand KL28370
- Page 1 CIP Pump Cart - 3T/h - 0.75KW - Instruction Manual KL28370 CIP Pump Cart - 3T/h - 0.75KW Instruction Manual KegLand Distribution PTY LTD www.KegLand.com.au www.KegLand.com.au Last Updated 29/01/2024 5:48 PM Page...
- Page 2 1. Functions on the panel Status display indicator • Display area: Set Frequency/ running frequency/electric currency/ and all other setting parameters • Program Power on/running ming Stop/Reset Press: shift / switch display; Keep pressing: confirm; Modify number www.KegLand.com.au Last Updated 29/01/2024 5:48 PM Page...
- Page 3 3. How to set the correct value for Mobile pump frequency control? Reminder: Pump has been set into “F00.0” working status when ex factory, please do not adjust the settings without the permission of manufacturer. www.KegLand.com.au Last Updated 29/01/2024 5:48 PM Page...
- Page 4 “ENTER”, will go Now press ENTER, we can see “F00.0”, time to back to “P118” 12. We can go back to the initial interface of adjust frequency as requested. interface. “2.50.0”. Now, press “PRG”. www.KegLand.com.au Last Updated 29/01/2024 5:48 PM Page...
- Page 5 Lock data 1=lock 0= PID forbidden 1= PID open P600 PID open way 2= PID on only if outer terminal is effective 0= pump stop working Frequency of F00.0 0~50 pump 50=max running speed www.KegLand.com.au Last Updated 29/01/2024 5:48 PM Page...
- Page 6 1: Deceleration time is too short Over current 1: Extend deceleration time OC2/UC2 2: Improper inverter capacity during 2: Increase the inverter capacity (70/66) configuration deceleration 3: Resolve sources of interference 3: whether there is interference www.KegLand.com.au Last Updated 29/01/2024 5:48 PM Page...
- Page 7 Inverter Low LU1 (88) 1: Abnormal power supply voltage voltage during 1: Check supply voltage 2: Lack of phase acceleration, LU3 (91) low voltage www.KegLand.com.au Last Updated 29/01/2024 5:48 PM Page...
- Page 8 3: Check data transfer format 3: Error in data transfer format 1: The terminal is loose, and the input 1: Check the connecting wires,and 4-20mA signal line is in poor contact connect the disconnected wires disconnection www.KegLand.com.au Last Updated 29/01/2024 5:48 PM Page...
- Page 9 CIP Pump Cart - 3T/h - 0.75KW - Instruction Manual Wrong 1: Wrong parameter setting 1: Set parameters correctly parameter setting 1:The parameter does not exist or the Error 1: Exit this parameter parameter is set by the factory parameter group www.KegLand.com.au Last Updated 29/01/2024 5:48 PM Page...
Need help?
Do you have a question about the KL28370 and is the answer not in the manual?
Questions and answers