1. Manuals
  2. Brands
  3. BAOJIE Manuals
  4. Two-Way Radio
  5. BJ-03
  6. Instruction manual

BAOJIE BJ-03 Instruction Manual

Hide thumbs

Advertisement

Table of Contents

BJ-03
INSTRUCTION MANUAL
Thank you
We are grateful you chosen BAOJIE for your walkie talkie applications.
NOTICES TO THE USER
◆ Government law prohibits the operation of unlicensed radio transmitters within the
territories under government control.
◆ Illegal operation is punishable by fine and/or imprisonment.
◆ Refer service to qualified technicians only.
Safety:It is important that the operator is aware of,and understands, hazards
common to the operation of any transceiver.
PRECAUTIONS
Do not charge the battery pack when it is wet.
●
Ensure that there are no metallic items located between the transceiver
●
and the battery pack.
If a transceiver part is damaged,do not touch the damaged parts.
●
If an earphone is connected to the transceiver , reduce the transceiver
●
volume. Pay attention to the volume level when turning the squelch off.
Do not place the earphone cable around your neck while near machinery
●
that may catch the cable.
Do not place the transceiver on unstable surfaces. If the transceiver
●
switches OFF/ON as a result of falling or hard impact, the volume and
channel configurations may reset.
Ensure that the end of the antenna does not touch your eyes.
●
Do not immerse the transceiver in water.
●
Always switch the transceiver power off before installing optional
●
accessories.
Do not look directly at the LED light while it is lit.
●

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the BJ-03 and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Summary of Contents for BAOJIE BJ-03

  • Page 1 BJ-03 INSTRUCTION MANUAL Thank you We are grateful you chosen BAOJIE for your walkie talkie applications. NOTICES TO THE USER ◆ Government law prohibits the operation of unlicensed radio transmitters within the territories under government control. ◆ Illegal operation is punishable by fine and/or imprisonment.
  • Page 2 If an abnormal odor or smoke is detected coming from the transceiver, ● switch the transceiver power off immediately,remove the battery pack from the transceiver, and contact your BAOJIE dealer. Use of the transceiver while you are driving may be against traffic laws. ●...
  • Page 3 Information concerning the battery pack: The battery pack includes flammable objects such as organic solvent. Mishandling may cause the battery to rupture producing flames or extreme heat, deteriorate, or cause other forms of damage to the battery. Please observe the following prohibitive matters. DANGER Do not disassemble or reconstruct the battery! ●...
  • Page 4 DANGER may generate heat or smoke, rupture, or burst into flame. Do not pierce the battery with any object, strike an with an ● instrument, or step on it! This may break or deform the battery, causing a short-circuit. The battery may generate heat or smoke, rupture, or burst into flame.

  • Page 5: Unpacking And Checking Equipment

    WARNING Do not charge the battery for longer than the specified time! ● If the battery pack has not finished charging even after the regulated time has passed, stop it. The battery may generate heat or smoke, rupture, or burst into flame. Do not place the battery pack into microwave or high pressure ●...

  • Page 6: Optional Accessories

    OPTIONAL ACCESSORIES  USB cable  AC Adapter  Earphone  Programming Cable/Programming Software ORIENTATION 1.Earphone jack(3.5mm ) 2.Micro USB jack Connect a USB cable to this jack to charge the transceiver battery pack. ● To charge the transceiver,use a commercially available USB cable. ●...

  • Page 7: Power Switch

    3.【 】 Key Short press 【 】key to switch the volume / channel mode, sound "du" ● indicates that is channel model, sound "di" indicates that is volume mode. After entering the channel mode, do not press the 【 】 or 【 】...
  • Page 8 Press to adjust volumes, change channels, and choose features. ● 4.LED indicator Refer to the LED Indicator Status table. ● Meaning Indicator Color Receiving Green Transmitting In the Charging Charging Completed Emerald 8.Lanyard PREPARATION CHARGING THE LITHUM BATTERY PACK The lithium battery pack is not charged at the factory , charge it before use . Please do the charging in accordance with the following procedure: 1.Turn off the supply power of walkie-talkie 2.Plug the USB cable into the Micro USB jack (FIG.1) .

  • Page 9: Connecting An Earphone

    3.Connect the USB cable to your PC or AC adapter. The LED indicator lights red(FIG.2). ● 4.When charging is complete, the LED indicator lights emerald. It takes approximately 4 hours to charge the battery pack. ● Note： ◆ The ambient temperature should be between 5 ℃ and 40 ℃ while charging is in progress.

  • Page 10: Basic Operation

    BASIC OPERATION ■Switch ON/OFF the power 1． After power on the intercom, press and hold the 【 】 button for 4 seconds, walkie-talkie entering boot state, if the intercom is on the switch-on notification function, it will sound "dong du de", if you turn on voice reminding function, it will broadcast “Power on”.
  • Page 11 the intercom reaches maximum volume 16, press 【 】key and sounds "di" which indicates the intercom has reached to maximum volume. 3．When the walkie-talkie in the volume mode, press 【 】 key, radio receiver output volume downs to grade 1, and sounds "di---de---du”. When the intercom reaches to its minimum volume grade1, press 【...

  • Page 12: Programmable Auxiliary Functions

    monitoring mode, press the 【 】 button for 2 seconds again, sound "tinkling, tinkling" and the intercom stops monitoring mode. ■Select the Channel 1．When the walkie-talkie in the channel mode, press 【 】key, radio will turn to next available channel, sounds "dong de", and broadcasts the current channel number.
  • Page 13 over the timeout time you set, the transceiver will stop transmitting, if the notification function is enabled, the radio will sound"du de". ■Battery Saver 1．The machine has a power-saving mode to choose, which can be set by M860 programming software. 2．When the power saving mode is selected as Auto, intercom’s initial power ratio is 1: 4, if there is no operation for a long time (no key operation and no signal received), every five minutes the radio will increase the proportion of...
  • Page 14 This function has a special voice processing method which can make others using the same frequency only can hear noise, it plays an effective role in secrecy. 1．Press【 】as well as【 】buttons to start the radio, when the green light flashing and it sounds “du” which means the scrambling function starts. 2．...
  • Page 15 2．Press and hold【 】 button for 2 seconds and it sounds “du” which means the upward scanning function starts. 3．Press and hold 【 】 button for 2 seconds and it sounds “de” which means the downward scanning function starts. 4．When the scanning function starts, the radio will repeatedly scan the the channels whose “scanning and adding”...

Table of Contents