Table of Contents
Related Manuals for Redgum IKON MOVE IK4SEB
Summary of Contents for Redgum IKON MOVE IK4SEB
- Page 1 AUSTRALIAN OWNED / OPERATED M O B I L I T Y REDGUM Brand PORTABLE MOBILITY SCOOTER IK4SEB (BLUE) IK4SEO (ORANGE) IK4SEG (GREEN) Edition 1 USER MANUAL Please read and keep these instructions ikonmobility.com.au ASK FOR THE BRAND...
- Page 2 M O B I L I T Y REDGUM Brand IKON Mobility owns the copyright to the MOVE Portable Mobility Scooter user manual. Any information contained in this user manual shall not be photocopied, reproduced or translated into any other languages without the prior written consent of IKON Mobility.
-
Page 3: Table Of Contents
CONTENTS INTRODUCTION PULL APART THE SCOOTER FEATURES REMOVE SEAT SPECIFICATIONS REMOVE BATTERY PACK SAFETY ADVICE FOLD DOWN TILLER SAFETY ADVICE PULL APART THE BASE (CONTINUED) EMI WARNING LIFTING THE SCOOTER EMI WARNING TROUBLESHOOTING (CONTINUED) UNPACK and INSPECT SUPPLIED PARTS INSPECT / MAINTAIN / SERVICE GLOSSARY OF SCOOTER CLEANING THE SCOOTER SCOOTER SET UP PRIOR TO USE... -
Page 4: Introduction
INTRODUCTION Thank you for purchasing this IKON Mobility product. If you have any issues or questions about the MOVE Portable Mobility Scooter please contact your supplier or IKON Mobility direct: T: +61 8 9248 4180 E: orders@for-de.com.au A: 1 Business Way, Malaga, Western Australia 6090 INTENDED USE This product has limitations and should be used in accordance to these guidelines. -
Page 5: Features
FEATURES PORTABLE - Portable scooter SCOOTER - Pulls apart for transport and storage - Full suspension - Comfortable mid back contoured rotating seat - Height adjustable seat - Width adjustable flip up padded armrests - Padded loop handlebar - Angle adjustable tiller - Fingertip operated controls - Forward / Reverse drive settings - Variable speed settings... -
Page 6: Specifications
SPECIFICATIONS Note: All dimensions shown are nominal - Overall: 1080mm (L) x 590mm (W) x 880mm (H) - Overall pulled apart (including part weight): Front assembly: 940mm (L) x 440mm (W) x 410mm (H) - 19kgs Rear wheel assembly: 320mm (L) x 490mm (W) x 250mm (H) - 13kgs Battery pack: 330mm (W) x 230mm (D) x 230mm (H) - 16kgs Seat (folded down): 460mm (W) x 610mm (D) x 530mm (H) - 11kgs Basket: 270mm (W) x 210mm (D) x 240mm (H) - 1kg... -
Page 7: Safety Advice
SAFETY ADVICE For your own safety, please read the user manual before using the MOVE Portable Mobility Scooter. Failure to follow these guidelines may result in damage to the product and put the user at risk. If in any doubt, contact your supplier directly for advice. - Please make sure that you are physically capable to operate this unit. -
Page 8: Safety Advice (Continued)
SAFETY ADVICE (CONTINUED) - Make sure the tiller is properly adjusted and in the locked position to suit the user to avoid damage and injury. - It is not allowed to have any person sitting in the scooter when transported by a vehicle, otherwise any injury or damage that might result. -
Page 9: Emi Warning
EMI WARNING Scooters may be susceptible to electromagnetic interference (EMI), which is a kind of interfering electromagnetic energy (EM) emitted from sources such as radio stations, TV stations, amateur radio (HAM) transmitters, two-way radio and mobile phones. The interference (from radio wave sources) can cause the scooter to release its brakes, move by itself, or move in unintended directions. -
Page 10: Emi Warning (Continued)
EMI WARNING (CONTINUED) WARNINGS 1. Do not operate hand-held transceivers (transmitters-receivers), such as citizens band (CB) radios, or turn ON personal communication devices, such as mobile phones, while the scooter is turned ON. 2. Be aware of nearby transmitters, such as radio or TV stations, and try to avoid coming close to them. -
Page 11: Unpack And Inspect Supplied Parts
UNPACK and INSPECT SUPPLIED PARTS We recommend that you thoroughly inspect all the supplied parts prior to assembling and using the MOVE Portable Mobility Scooter. KEY (x2) (not to scale) SCOOTER BATTERY CHARGER (not to scale) Please take care when unpacking the product and removing any protective packing materials. -
Page 12: Glossary Of Scooter
GLOSSARY OF SCOOTER Please become familiar with the MOVE Portable Mobility Scooter and the terms used when describing certain parts of the product. BACKREST TILLER REST SEAT BASKET BATTERY PACK FLAT FREE TYRES NUDGE IMPORTANT NOTE If you are ever unsure about any aspect of the MOVE Portable Mobility Scooter please do not issue or use and contact your supplier for support. -
Page 13: Scooter Set Up Prior To Use
SCOOTER SET UP PRIOR TO USE Please read through the entire user manual prior to setting up and using the scooter. The user manual has been layed out in a logical order for instruction on how to set up, use, pull apart for transport and care for the MOVE Portable Mobility Scooter. However you may need to revert back to the contents page to locate information on a specific aspect of the scooter. -
Page 14: Connect Base (Continued)
CONNECT BASE Please follow these instructions to connect the front assembly with the rear assembly: Step 1: Place the rear wheel assembly directly behind the front assembly as shown. Rear Assembly Front Assembly Mount Axle Anti Tip Wheels Align front and rear assemblies. Axle Cradle Identify where the axle cradles are on the inside... - Page 15 CONNECT BASE (CONTINUED) NOTE: Seat The rear wheel assembly Post must be resting on the main wheels and the anti tipper wheels. Step 2: Lift the front assembly up by the top of the seat post. Move the front assembly under the front of the rear wheel assembly and then lift up to locate the mount axle onto the axle cradles on the rear wheel assembly.
-
Page 16: Raise Tiller
Step 1: RAISE TILLER Undo the tiller knob. Please follow these instructions to raise the tiller: Step 2: Raise the tiller to the required angle. Step 3: Whilst holding the tiller at the required angle Tighten the tiller knob until the tiller is firmly held in position. -
Page 17: Unlock Tiller
UNLOCK TILLER The tiller should be locked in position when the scooter is pulled apart. This stops the tiller from swinging when the front assembly is being moved. Please follow these instructions to unlock the tiller: Tiller Lock Knob Important Note: Check to ensure that the tiller is UNLOCKED prior to use. -
Page 18: Fit Basket
FIT BASKET Please follow these instructions to fit the basket to the tiller: Step 1: Line up the 3 square holes in the rear of the basket with the mount clips on the tiller. Step 2: Push basket down onto top and bottom mount clips at the same time. -
Page 19: Fit Battery Pack
FIT BATTERY PACK Please follow these instructions to fit the battery pack to the scooter: Step 1: Undo knob and raise up battery pack clamp. Tighten tri wheel until the clamp stays up on the seat post. Step 2: Place battery pack Seat into recess in base. -
Page 20: Fit Seat
FIT SEAT Please follow these instructions to fit the seat to the scooter: Seat Lever Step 1: Seat Pole Using the correct lifting technique pull up the Seat Post seat lever and lift up the seat at the same time . Step 2: Approach the scooter at an angle and tilt the seat up so... -
Page 21: Lift Up Backrest
LIFT UP BACKREST Please follow these instructions to lift up the backrest on the scooter: Step 1: Rotate the backrest up. Step 2: Pull the backrest back until it cannot go any further. The MOVE Portable Mobility Scooter is now assembled. ikonmobility.com.au ASK FOR THE BRAND... -
Page 22: Prepare The Scooter For Use
PREPARING THE SCOOTER FOR USE It is very important that the MOVE Portable Mobility Scooter is set up to suit the user so they feel comfortable and have full control when operating the scooter. Refer to the following pages for instruction on how to: - Rotate up armrests (for access) - Rotate seat (for access) -
Page 23: Rotate Up Armrests
ROTATE UP ARMRESTS The armrests on the MOVE Portable Mobility Scooter can be rotated up to allow for improved access when going to sit on the scooter. Please follow these Armrest instructions to rotate the armrest on the scooter: Step 1: Rotate up the required armrest. -
Page 24: Rotate Seat
ROTATE SEAT The seat on the MOVE Seat Portable Mobility Scooter Lever can be rotated around to allow for improved access when going to sit on the scooter. Please follow these instructions to rotate the seat on the scooter: Step 1: Pull up the seat lever and at the same time begin to rotate the seat... -
Page 25: Adjust Seat Height
ADJUST SEAT HEIGHT The MOVE Portable Mobility Scooter has three seat height settings. Please follow these instructions to adjust the seat height as requried: SET UP GUIDELINE To promote the correct sitting posture - users thighs should be at 90° to the chest. IMPORTANT NOTE We recommend that the scooter supplier or an experienced technician makes any... -
Page 26: Adjust Armrest Width
ADJUST ARMREST WIDTH The MOVE Portable Mobility Scooter has width adjustable armrests. Please follow these instructions to adjust the armrest width as required: Step 1: Knob Undo knobs. Step 2: Slide out armrests to the required width setting. Ensure armrest are evenly spaced away from the seat. -
Page 27: Adjust Armrest Angle
ADJUST ARMREST ANGLE The MOVE Portable Mobility Scooter has angle adjustable armrests. Please follow these instructions to adjust the armrest angle as required: Step 1: Rotate armrest up. Armrest Bolt Locking IMPORTANT NOTE We recommend that the scooter supplier or an experienced technician makes any requried adjustments to the armrest angle. -
Page 28: Adjust Tiller Angle
ADJUST TILLER ANGLE The MOVE Portable Mobility Scooter has an angle adjustable tiller. Please follow these instructions to adjust the armrest width as required: SET UP GUIDELINE To promote the correct sitting posture: The tiller should be within easy reach when the users back is leaning on the backrest. -
Page 29: Inspect The Scooter Prior To Use
INSPECT THE SCOOTER PRIOR TO USE Before using the MOVE Portable Mobility Scooter please perform the following tasks: INSPECT THE SCOOTER Visually and physically look over the scooter for signs of damage or wear prior to use. Pay particular attention to the following areas: - Tyres - Seat - Backrest... -
Page 30: Charging Battery Pack
CHARGING BATTERY PACK The MOVE Portable Mobility Scooter is supplied with rechargeable maintenance free hybrid gel batteries which MUST BE charged using the supplied battery charger. WARNING! FAILURE TO USE CORRECT AND SPECIFIED CHARGER MAY RESULT IN DEATH, DAMAGE OR CANCELLATION OF WARRANTY AND STATUTORY PROTECTIONS. -
Page 31: Charging Battery Pack (Continued)
CHARGING BATTERY PACK (CONTINUED) Step 2: Step 3: Rotate open the Plug the battery charger cable socket cover cap. into the charger socket. Step 4: RED light: Charging Plug the power cable into a power outlet GREEN Light: Charged and turn the power on. Step 5: Battery charging should take approx. -
Page 32: Prepare To Ride The Scooter
PREPARE TO RIDE SCOOTER Sit on the scooter and rest your feet on the footplate. Important note: ALWAYS operate the scooter sitting down. Never stand up and operate the scooter. We recommend that you only rest your feet on the footrest as shown above and not on the front cover of the scooter as it might scratch and cause damage to the plastic covers. -
Page 33: Turn On Scooter
TURN SCOOTER ON Please follow these instructions to fit the key and turn the scooter on: 2 keys supplied. Keep one in a safe place as a spare. Ignition Step 1: Locate the ignition. (Right hand side of the tiller underneath the handle.) Step 2: Step 3:... -
Page 34: Scooter Controls
SCOOTER CONTROLS Please follow these instructions Hand to control the scooter as required: grips Headlight switch Battery Power Indicator Speed Dial RIGHT Forward / Reverse LEFT Forward / Reverse Paddle Paddle Horn Forward / Reverse Paddle: Pull the RIGHT hand side of lever in towards you to make the scooter move FORWARDS. -
Page 35: Operating The Scooter
OPERATING THE SCOOTER Getting Started - Select a level area with plenty of space. - Ensure you are comfortable on the scooter prior to driving. Adjust setting as required. Scooter Movement - Push in the key to turn on the power. - Turn the speed dial all the way to the left (Tortoise) to allow slow movement. -
Page 36: Reset The Battery Pack
RESET THE BATTERY PACK The MOVE Portable Mobility Scooter is fitted with a main circuit breaker with a reset button. When the voltage on the scooter battery pack becomes low or the scooter is heavily strained because of excessive load or travelling up a steep incline, the main circuit breaker may trip to protect the motor and the electronics on... -
Page 37: Disengage Motor (Freewheeling)
DISENGAGE MOTOR Please follow these instructions to disengage the motor so the scooter can be pushed around without power when required (Freewheeling): IMPORTANT NOTE - NEVER disengage the motor on an incline. - Never ride the scooter when the motor is disengaged as the braking system is also disengaged. -
Page 38: Pull Apart The Scooter
PULL APART THE SCOOTER Please follow these instructions to pull apart the MOVE Portable Mobility Scooter in the correct order for transport or storage. SEAT REAR ASSEMBLY BATTERY PACK IMPORTANT NOTE If you are ever unsure about any aspect of the MOVE Portable Mobility Scooter please do not use and contact your supplier for support. -
Page 39: Remove Seat
REMOVE THE SEAT Step 1: Fold the Please follow these instructions to remove the seat from the scooter: backrest down onto the seat. NOTE: Use the correct lifting technique when lifting the seat as it weighs 11kg. Step 2: Pull the seat lever up and at the same time pull the seat up and away from the scooter. -
Page 40: Remove Battery Pack
REMOVE BATTERY PACK Please follow these instructions to remove the battery pack from the scooter: Step 1: Lift up the battery pack clamp. Refer to page 16 for further information. Step 1: Remove the battery pack from the scooter. NOTE: Use the correct lifting technique when removing the battery pack as it weighs 16kg. -
Page 41: Fold Down Tiller
FOLD DOWN TILLER Please follow these instructions to fold down the tiller: Step 1: Remove the basket from the tiller. Step 2: Lock the tiller in place. Refer to page 14 for further information. Step 3: Whilst holding the tiller, undo the tiller knob and gently lower the tiller down... -
Page 42: Pull Apart The Base
PULL APART THE BASE Please follow these instructions to seperate the front assembly from the rear assembly: Pull the lock / release handle up and slightly lift the front assembly it is connected to. The rear assembly will rock backward and rest on the anti tipper wheels. Whilst still holding the handle up - Roll the front assembly slightly forward and lower the handle down. -
Page 43: Lifting The Scooter
LIFTING THE SCOOTER Once the MOVE Portable Mobility Scooter is pulled apart it each part can be picked up and moved as required. Take care when lifting the scooter and always use the correct lifting technique: - Lift with bent knees. FRONT - Keep your back straight. -
Page 44: Troubleshooting
TROUBLESHOOTING If the MOVE Portable Mobile Scooter fails to operate please check the following aspects: - Unit is switched on. - Battery has been fitted. - All plugs and cable connections are firmly fitted. - Battery level shows full charge. - Motor has been engaged. -
Page 45: Inspect / Maintain / Service
INSPECT / MAINTAIN / SERVICE INSPECTIONS Visually and physically look over the MOVE Portable Mobile Scooter for signs of damage or wear prior and during use. Inspect the entire scooter and particular attention to the following areas: Tyres / Seat / Backrest / Armrests / Tiller / Display / Handgrips / Fixings Check to ensure that all parts work and scooter can be controlled as required. -
Page 46: Cleaning The Scooter
CLEANING THE SCOOTER Clean the MOVE Portable Mobility Scooter on a regular basis. You must take extreme care when cleaning any electrical aspect of the scooter as water or fluid of any kind can cause severe damage. - Remove the battery pack from the scooter prior to cleaning. - Only use a soft damp cloth and a non-abrasive cleaning solution or mild detergent. -
Page 47: Warranty (Continued)
WARRANTY The IKON Mobility MOVE Portable Mobility Scooter (IK4SE) is covered by the following warranty from the date of purchase: The Warranty Terms and Conditions noted below provide your IKON Mobility scooter with excellent coverage against possible defective parts or possible faulty workmanship. - Page 48 WARRANTY (CONTINUED) Exclusions - Normal wear items are not covered under warranty. These items include such items as brushes, tyres, tubes, brake pads, upholstery, seating and armrests. - Damage caused byexcessive, abusive, misuse, negligence, accident or water - Improper maintenance, maintenance carried out by a non approved “Warranty Dealer”.
- Page 49 ACCESSORIES The IKON MOBILITY MOVE Portable Mobility Scooter can be fitted with the following Scooter Xtras range of accessories: BAG CARRIER SEAT WALKER CARRIER SE-BC SE-WWC DELUXE SUN CANOPY SUN CANOPY SE-S SE-SD Please turn the page for more accessory options... ikonmobility.com.au ASK FOR THE BRAND...
-
Page 50: Accessories
ACCESSORIES (CONTINUED) The IKON MOBILITY MOVE Portable Mobility Scooter can be fitted with the following Scooter Xtras range of accessories: WALKING STICK CARRIER OXYGEN BOTTLE CARRIER SE-WSH SE-OBC SIDE FOLDING WALKER CARRIER WALKING FRAME CARRIER SE-SFWC SE-WFC Please turn the page for more accessory options... ikonmobility.com.au ASK FOR THE BRAND... -
Page 51: Accessories (Continued)
ACCESSORIES (CONTINUED) The IKON MOBILITY MOVE Portable Mobility Scooter can be fitted with the following Scooter Xtras range of accessories: MOBILE PHONE HOLDER SE-022 DRINK BOTTLE HOLDER SE-020 SAFETY FLAG HOLDER SE-SFH Please contact your supplier or IKON MOBILITY if you require further information on any the Scooter Xtras accessories that suit the MOVE Portable Mobility Scooter. - Page 52 DISTRIBUTOR: AUSTRALIAN OWNED / OPERATED M O B I L I T Y REDGUM Brand ikonmobility.com.au ASK FOR THE BRAND...
Need help?
Do you have a question about the IKON MOVE IK4SEB and is the answer not in the manual?
Questions and answers