Empura Equipment EGR-36C NAT Service, Installation And Care Manual
  1. Manuals
  2. Brands
  3. Empura Equipment Manuals
  4. Ranges
  5. EGR-36C NAT
  6. Service, installation and care manual

Empura Equipment EGR-36C NAT Service, Installation And Care Manual

Gas ranges w/ convection oven base
Hide thumbs
Table of Contents

Advertisement

Quick Links

Download this manual
Please read this manual completely before attempting to install or
operate this equipment. Notify carrier of damage! Inspect all
components immediately.
©2024 Empura Equipment
Gas Ranges
w/ Convection Oven Base
Service, Installation & Care Manual
Gas Convection Oven
Base Range Models
EGR-36C_NAT
EGR-36C_LP
www.Empura.com
EGR-36C
1
v1-1-24

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the EGR-36C NAT and is the answer not in the manual?

Questions and answers

Related Manuals for Empura Equipment EGR-36C NAT

Summary of Contents for Empura Equipment EGR-36C NAT

  • Page 1 Service, Installation & Care Manual Gas Convection Oven Base Range Models EGR-36C_NAT EGR-36C_LP EGR-36C Please read this manual completely before attempting to install or operate this equipment. Notify carrier of damage! Inspect all components immediately. www.Empura.com ©2024 Empura Equipment v1-1-24...

  • Page 2: Table Of Contents

    ALTERATION, SERVICE OR MAINTENANCE CAN CAUSE PROPERTY DAMAGE, INJURY OR DEATH. READ THE PROPERTY DAMAGE, INJURY OR DEATH. READ THE WARNINGS www.Empura.com ©2024 Empura Equipment v1-1-24 INSTALLATION, OPERATING AND MAINTENANCE INSTALLATION, OPERATING AND MAINTENANCE • Do not touch any hot surfaces.

  • Page 3: Warnings & Installation

    This equipment must be installed adjacent to non-combustible surfaces only with a minimum spacing of 6” from all sides. This equipment must be a distance of 6” from other equipment. The equipment must have the 4” legs www.Empura.com ©2024 Empura Equipment installed and be placed on a non-combustible surface. v1-1-24 •...

  • Page 4: Installation

    • • OPERATING INSTRUCTIONS AND CONTROLS How to www.Empura.com ©2024 Empura Equipment v1-1-24 • When turning on for the first time please be advised that it might take a little longer to ignite due to the air existing in Press the pipe.

  • Page 5: Operation & Controls

    ©2024 Empura Equipment value. After finishing input of the value , press ③ Setup key to get the set value saved. value. After finishing input of the value , press ③ Setup key to get the set value saved.

  • Page 6: Wiring Diagram, Gas Conversion & Cleaning

    The residual iron scale may cause rusting. Do not clean the surface with chlorine cleanser (bleach, dish detergent, hydrochloric acid etc.). Do not clean the floor where the unit is located with corrosive substances. www.Empura.com ©2024 Empura Equipment v1-1-24...

  • Page 7: Cleaning & Troubleshooting

    Wrong orifice size for the gas Install proper orifice when the gas supply is turned supply It has a light back sound The air shutter is too open Adjust the damper when the gas supply is turned www.Empura.com ©2024 Empura Equipment v1-1-24...

  • Page 8: Troubleshooting

    Increase air flow/gas to the unit black smoke Oven Griddle/Broiler MODEL STYLE Electric rating Open burner EGR-36C 6 burners with oven 120VAC, 60HZ 30,000BTU/pc*6 31,000BTU/pc EGR-60C 10 burners with oven 120VAC, 60HZ 30,000BTU/pc*10 31,000BTU/pc*2 SPECIFICATION LIST www.Empura.com ©2024 Empura Equipment v1-1-24...

This manual is also suitable for:

Egr-36c lpEgr-36c

Table of Contents