Do you have a question about the Vitesse UHS 1500B and is the answer not in the manual?
Questions and answers
Summary of Contents for Origin Vitesse UHS 1500B
Page 1
Origin Vitesse UHS 1500B Burnisher with Passive Vacuum Owners Operating Guide Origin Cleaning Equipment Pty Ltd Seven Hills NSW AUSTRALIA Made in Australia...
Page 2
SAFE AND PROPER USE OF THIS MACHINE Make sure that this manual is read and understood by the operator. Only trained operators should operate this machine once they are familiar with the adjustments and correct method. When using this machine, basic safety precautions should always be observed, including the following: READ ALL INSTRUCTIONS BEFORE USING THIS MACHINE.
Delivery and Assembly Packaging This machine is packed in two cartons. Carton 1 contains the handle assembly and carton 2 contains the base assembly with an Ultra High Speed pad attached and the operating guide. To remove the base assembly cut the side of the carton where the wheels are located.
Page 4
2. Pad Size Use a 52cm Ultra High Speed pad. Note: This Burnisher is supplied with an Ultra High Speed Pad that is suitable for this machine. Other types of High Speed Pads can be used however the wrong type of pad could effect the result on the floor and can cause increased amperage overload on the motor.
Page 5
Picture 14 Picture 15 Picture 16 Picture 17 4. Controls and Indicators Switch on Master Switch ( see picture 14 ). The Power On/Off Switch is on the LH side of the handle switch box (see picture 15 & 16). NOTE: Square red button on the base is a battery ‘wake-up’ switch ( see picture 18).
Machine Operation • After fitting the pad (IF A PAD IS NOT FITTED DAMAGE CAN BE CAUSED TO THE FLOOR IF THE MACHINE IS USED AND WILL ALSO CAUSE DAMAGE TO THE PAD DRIVER). • Adjust the handle to a comfortable position. •...
Need help?
Do you have a question about the Vitesse UHS 1500B and is the answer not in the manual?
Questions and answers