Safety Instructions • Position on a flat, stable surface. • A service agent/qualified technician should carry out installation and any repairs if required. Do not remove any components on this product. • Consult Local and National Standards to comply with the following: - Health and Safety at Work Legislation - BS EN Codes of Practice...
Visual Inspection, Polarity Test, Earth Continuity, Insulation Continuity and Functional Testing. • HOST recommend that this product is connected to a circuit protected by an appropriate RCD (Residual Current Device). Location of Controls...
On/Off Button (On/Off) • After the machine is plugged in, LED display (G) will show “Off”. Press the On/Off button, LED display (G) will show “On”. Now the machine is ready to use. • After using the machine, press the On/Off button before unplugging the machine. •...
Display thus Consult a qualified technician NOTE: Sealing bar replacement is not covered under warranty Service Should your appliance have a fault, please visit the Service section of the HOST website. HOST0605VP_EN_A5_v1_20220817.indb 5 HOST0605VP_EN_A5_v1_20220817.indb 5 2022/8/17 17:52:21 2022/8/17 17:52:21...
All rights reserved. No part of these instructions may be produced or transmitted in any form or by any means, electronic, mechanical, photocopying, recording or otherwise, without the prior written permission of HOST. Every effort is made to ensure all details are correct at the time of going to press, however, HOST reserve the right to change specifications without notice.
Page 7
DocuSign Envelope ID: 0DEA8331-C8BA-4DEE-BE9E-CB841C6EC97A UKCA Declaration of Conformity {Host} {Host House, Chepstow, NP16 6UP} hereby declare that the equipment is in conformity with the requirements of the following Regulations: Supply of Machinery (Safety) Regulations 2008 Electromagnetic Compatibility Regulations 2016 ...
Need help?
Do you have a question about the HOST0605VP and is the answer not in the manual?
Questions and answers