Rocstor Y10G013-B1 User Manual

®
TrueReach
HDMI EXTENDER
™
4K/60Hz
User Manual
Y10G013-B1
Important safety notice
1- Ensure all devices are properly grounded to prevent electric shock.
2- Avoid placing the device near radiators, heat registers, or in direct sunlight.
3- Position the device in a well-ventilated area and avoid blocking any ventilation
openings.
4- Protect the device from exposure to rain or water to prevent potential failures,
res, or electric shocks.
5- Place the device on a stable, even surface to prevent falls and malfunctions.
6- Never insert metallic objects into the open parts of the device to avoid the risk of
electric shock.
7- When using a third-party power supply, verify that it meets the speci ed
requirements for safety and compatibility.
8- Avoid plugging or unplugging Ethernet or HDMI cables while the power is on to
prevent potential damage.
Introduction
This TrueReach HDMI Extender HDMI point-to-point extender kit o ers
zero-latency transmission capabilities. It extends 4K@60Hz HDMI signals up
to 60m using CAT6/6A/7 network cables. This kit provides a reliable,
ultra-high-de nition video transmission solution, making it widely
applicable in security monitoring, home theater, broadcasting, training, and
various other elds.
Features
• Experience zero-latency transmission for seamless performance.
• Extend 4K@60Hz HDMI signals up to 60m/197ft using Cat6/6A/7 cables.
• Enjoy support for resolutions up to 3840 x 2160@60Hz, with backward
compatibility.
• Bene t from HDR10 support for enhanced visual quality.
• Supports EDID passthrough and auto downscaling for optimal signal
transmission.
• Equipped with lightning protection, surge protection, and ESD protection
for enhanced durability.
• Utilize PoC Network Cable Power Supply, requiring only the TX Power
Supply for operation.
2
Package Contents
Transmitter x1 Receiver x1 DC5V/2A x1 User manual x1
Installation Requirements
Item Description Requirement
Signal Devices with HDMI port
HDMI cable ≤5m
source (PC, DVD, NVR, etc.)
CAT6/6A/7，following standard
Cable CAT6/6A/7≤60m
IEEE-568B
Display
TVs, projectors, etc. with HDMI port HDMI cable ≤5m
device
3
Panel Description - Transmitter (TX)
① ②
③
①
RJ45 output Connect with CAT6/6A/7 network cable
② HDMI input Connect with HDMI source device with HDMI cable
③ DC5V Connect with DC 5V/2A power adapter
Panel Description - Receiver (RX)
① ②
① RJ45 input Connect with CAT6/6A/7 network cable
② HDMI output Connect with HDMI display device with HDMI cable
4