Table of Contents
Advertisement
Quick Links
Advertisement
Table of Contents
Related Manuals for AEG IKX64441CB
Summary of Contents for AEG IKX64441CB
- Page 1 EN User Manual | Hob IKX64441CB aeg.com\register...
-
Page 2: Table Of Contents
Welcome to AEG! Thank you for choosing our appliance. Get usage advice, brochures, trouble shooter, service and repair information: www.aeg.com/support Subject to change without notice. CONTENTS 1. SAFETY INFORMATION................2 2. SAFETY INSTRUCTIONS................4 3. INSTALLATION....................6 4. PRODUCT DESCRIPTION................8 5. - Page 3 • Keep all packaging away from children and dispose of it appropriately. • WARNING: The appliance and its accessible parts become hot during use. Keep children and pets away from the appliance when in use and when cooling down. • If the appliance has a child safety device, it should be activated.
-
Page 4: Safety Instructions
• Metallic objects such as knives, forks, spoons and lids should not be placed on the hob surface since they can get hot. • Do not use the appliance before installing it in the built-in structure. • Do not use a steam cleaner to clean the appliance. •... - Page 5 – Do not store any small pieces or • If the mains socket is loose, do not sheets of paper that could be pulled in, connect the mains plug. as they can damage the cooling fans • Do not pull the mains cable to disconnect or impair the cooling system.
-
Page 6: Installation
• Switch off the appliance and let it cool WARNING! down before cleaning. • Do not use water spray and steam to Risk of fire and explosion. clean the appliance. • Fats and oil when heated can release • Clean the appliance with a moist soft flammable vapours. - Page 7 If you install the hob under a hood, please see the installation instructions of the hood for the minimum distance between the appliances. A = min. 6 mm, for double ovens from AEG, Electrolux and Zanussi. A = min. 12 mm, for double ovens from other brands.
-
Page 8: Product Description
4. PRODUCT DESCRIPTION 4.1 Cooking surface layout Induction cooking zone Control panel 4.2 Control panel layout Use the sensor fields to operate the appliance. The displays, indicators and sounds tell which functions operate. Sensor Function Comment field On / Off To activate and deactivate the hob. -
Page 9: Daily Use
Sensor Function Comment field Timer display To show the time in minutes. Hob²Hood To activate and deactivate the manual mode of the function. To select the cooking zone. To increase or decrease the time. PowerBoost To activate the function. Control bar To set a heat setting. - Page 10 seconds (a pan, a cloth, etc.). An acoustic The indicators appear when a cooking zone signal sounds and the hob deactivates. is hot. They show the level of the residual Remove the object or clean the control heat for the cooking zones you are currently panel.
- Page 11 5.6 Bridge To activate the function for a cooking zone: touch comes on. To deactivate the function: change the heat The function operates when the pot setting. covers the centres of the two zones. For 5.9 Timer more information on the correct placement of cookware refer to "Using •...
- Page 12 up. The display switches between and the To activate the function: touch counted time (in minutes). comes on for 4 seconds. The Timer stays on. To see how long the cooking zone To deactivate the function: touch . The operates: touch to set the cooking zone.
- Page 13 5.14 Power management communicator. Speed of the fan is defined automatically on basis of mode setting and If multiple zones are active and the temperature of the hottest cookware on the consumed power exceeds the limitation of the hob. You can also operate the fan from the power supply, this function divides the hob manually.
-
Page 14: Hints And Tips
speed manually. When you press 5. Press of the timer to select an raise the fan speed by one. When you reach automatic mode. an intensive level and press again you will set fan speed to 0 which deactivates the hood To operate the hood directly on the hood fan. - Page 15 – Cookware with a diameter smaller • humming: you use a high power level. than the declared minimum receives • clicking: electric switching occurs. only part of the power generated by • hissing, buzzing: the fan operates. the cooking zone which results in The noises are normal and do not indicate slower heating.
-
Page 16: Care And Cleaning
• Do not interrupt the signal between the work with this function refer to our consumer hob and the hood (e.g. with the hand, a website. The AEG cooker hoods that work cookware handle or a tall pot). See the picture. -
Page 17: Troubleshooting
• Use a special cleaning agent suitable for otherwise, the dirt can cause damage to the surface of the hob. the hob. Take care to avoid burns. Use a • Always use a scraper recommended for special hob scraper on the glass surface hobs with a glass surface. - Page 18 Problem Possible cause Remedy The hob deactivates. You put something on the sensor Remove the object from the sensor field. field Residual heat indicator does not The zone is not hot because it oper‐ If the zone operated sufficiently long to come on.
-
Page 19: Technical Data
9. TECHNICAL DATA 9.1 Rating plate Model IKX64441CB PNC 949 598 193 00 Typ 61 B4A 01 AA 220 - 240 V / 400 V 2N, 50 - 60 Hz Induction 7.35 kW Made in: Germany Ser.Nr....7.35 kW 9.2 Cooking zones specification... -
Page 20: Environmental Concerns
IEC / EN 60350-2, BS EN 60350-2 - • When you heat up water, use only the Household electric cooking appliances - Part amount you need. 2: Hobs - Methods for measuring • If it is possible, always put the lids on the performance. - Page 24 867384755-A-012024...
Need help?
Do you have a question about the IKX64441CB and is the answer not in the manual?
Questions and answers