Subscribe to Our Youtube Channel
Summary of Contents for Regal DAC101
- Page 1 REGAL Closer to live music DAC101 Owners Manual Version 1.0 Digital to Analog Converter...
- Page 2 regalaudio.se R. Audio Designs AB Heidenstams gata 13 58437 Linköping, Sweden 2024-03...
-
Page 3: Important Safety Instructions
• The DAC101 power supply supports only 230VAC / 50Hz. • The DAC101 is a Class 1 equipment, it is essential that it is connected to a MAINS socket outlet with a protective earthing connection. • Do not remove any covers or try to gain access to the inside. There are no user adjustments or fuses that can be changed without proper qualification. -
Page 4: Warranty
Validation is done by matching the serial number on the device casing with the invoice from an official Regal dealer. This warranty is only valid for the original purchaser of new equipment. This limited warranty covers the repair and replacement of defective parts, excluding any other remedy. - Page 5 INTRODUCTION Introduction The DAC101 is a highperformance digitaltoanalog converter (DAC) designed to provide exceptional audio quality for discerning listeners. Utilizing R2R D/A conversion technology and innovative design concepts, the DAC101 delivers transparent sound with natural high resolution, ensuring an immersive listening experience.
-
Page 6: Installation
Installation Do not place the DAC101 on an amplifier or any other equipment that generates heat. The chassis feature an antivibration base (Isoacoustics) that makes it insensitive to vibrations. The unit must be installed horizontally on a flat, firm and stable stand. - Page 7 RCA connectors 2 V @ 0 dBFS Software update: SWUP: USBC connector for software update. The software update interface (SWUP) must only be used by Regal or authorized service personell. Owners and dealers are not authorized to update the software.
-
Page 8: User Interface
SPD LED: SPDIF digital audio input is selected. Note: The input select function is activated as the DAC101 is ready to play songs. Note: Should the DAC101 be switched OFF then ON again, the activation phase will start again from zero. -
Page 9: Operation
Breaking in Breaking in the DAC101 takes some time but is well worth the effort. It would be a mistake to prejudge the sound quality before 100 hours. During breakin, it is best to feed an external digital audio signal or Mnoise into any of the digital inputs of the... -
Page 10: Case Cleaning
RECOMMENDATIONS Case cleaning Clean the DAC101 casing by using a soft, nonfluffy, slightly damp cloth. Do not use any cleaning products as this could permanently damage the surface finish of the casing. Power cycling It is recommended to leave the DAC101 powered on except for longer periods when not being used. -
Page 11: Specifications
SPECIFICATIONS Digital inputs 1x AES/EBU Galvanically isolated 1x SPDIF Galvanically isolated 1x USB Audio 2.0 Galvanically isolated Analog outputs 1 stereo RCA unbalanced 1 stereo XLR balanced Output level @ 0 dBFS Output impedance RCA 10 ohm XLR 20 ohm Noise floor 130 dBr 0.003 % @ 2 kHz, 6 dBFS... - Page 12 REGAL regalaudio.se...
Need help?
Do you have a question about the DAC101 and is the answer not in the manual?
Questions and answers