Advertisement
Quick Links
Upgrading
"TriMark
to
"TriMark
Full-Feature" RF Controller
Rewiring Guide
This guide explains how to upgrade from the discontinued 19906-01 IEI RF Controller to the 22310-01
TM-FF Controller. Use the tables explaining each wire's location and purpose for the old and new
modules in conjunction with the equivalency spreadsheet and schematic for the recommended retrofit
installation. Wire colors for the original installation may not match those mentioned in this guide, so
reference only the parent connector and pin location when matching up wires.
IEI Wiring Definitions
This table details what each wire's purpose, parent connector, and pin location is for the original equip-
ment installation. The default factory color is called out, but your installation may differ if the OEM
provided integrated harnesses.
IEI RF Module Connector Names and Locations
IEI" RF Controller
1
Advertisement
Subscribe to Our Youtube Channel
Summary of Contents for TriMark IEI
- Page 1 Full-Feature” RF Controller Rewiring Guide This guide explains how to upgrade from the discontinued 19906-01 IEI RF Controller to the 22310-01 TM-FF Controller. Use the tables explaining each wire’s location and purpose for the old and new modules in conjunction with the equivalency spreadsheet and schematic for the recommended retrofit installation.
- Page 2 Module. The wire colors called out in this table are accurate if you’ve purchased the kit including pig- tail harnesses. Wire colors will vary if you’ve purchased an adaptor harness from a manufacturer other than TriMark. TM-FF RF Module Connector Names and Locations IEI RF Module Wire Definitions J11 Connector Default Wire Color 10-Pin Connector...
- Page 3 Upgrading “TriMark IEI” RF Controller “TriMark Full-Feature” RF Controller TM-FF RF Module Wire Definitions Default Wire Color C1: 4-PIN HARNESS None IGNITION Input YELLOW GROUND Input BLACK POWER (+12V) Input C2: KEYPAD HARNESS Default Wire Color Pre-Made Harness (p/n 22305-01 or 23981-01)
- Page 4 Upgrading “TriMark IEI” RF Controller “TriMark Full-Feature” RF Controller WIRE EQUIVALENCY SORTED BY NEW SYSTEM CONNECTIONS New System REPLACES Old System IEI Receiver Connector Potential Wire Color Connector Pin Wire Purpose Yellow KEY INSERTED/IGNITION Black GROUND INPUT +12V INPUT New Keypad Harness...
-
Page 5: New System
NO CONNECTION 4-PIN DOOR LOCK SWITCH INPUT GREEN/WHITE ANY WIRES COMING FROM THE TRIMARK KEYPAD HARNESS (IF USED) SHOULD BE REMOVED. A NEW HARNESS WILL PROVIDE THE CONNECTION TO REPLACE THOSE WIRES. No other connections are used from this system... - Page 6 Upgrading “TriMark IEI” RF Controller “TriMark Full-Feature” RF Controller...
- Page 7 Upgrading “TriMark IEI” RF Controller “TriMark Full-Feature” RF Controller TriMark Corporation 500 Bailey Avenue P.O. Box 350 New Hampton, IA 50659 United States Tel: +1 641 394 3188 Fax: +1 641 394 2392 E-mail: tips@trimarkcorp.com www.trimarkcorp.com TriMark Europe Limited TriMark (Xuzhou) Cedar Court Automotive Components Co.
Need help?
Do you have a question about the IEI and is the answer not in the manual?
Questions and answers